The problem has been that the Kaiser does not dial local numbers with the + sign in front. The problem occurs with prepaid Rogers service in Canada only and probably occurs to all Kaisers (2 for sure). In fact Rogers and Fido monthly plan SIM card work just fine. HTC has not helped and nor has Rogers who claim that the phone is "not supported". The problem is in the Kaiser though. The prepaid sim card that creates the problem in the Kaiser works just fine in any other phone including Rogers HTC Touch.
I start hating my phone, too many problems with no solution in sight.
Cheers
Giovanni
I cannot dial the local numbers that I have in the contact list. All my contacts phone numbers have been made on the PC with outlook and then sycronized them on the Kaiser. All the numbers have been made selecting the country code in outlook and appear in the format +country code then (areacode) then number. Unfortunately I can only dial the international ones and not the local. When I dial the local numbers a AM says that the number has not been assigned. The same number dialed via Skype works just fine.
If I remove the +sign and leave the 1 (I am in Canada) the number dials no problem. Same thing if I dial just the area code and number.
The problem is driving me nuts. I cannot make 2 set of contacts one for Skype and one for the regular calls. I also travel a lot and I need to dial the numbers from different countries without have to change anything.
I looked on the net for suggestions but did not find any answer.
Any help is much appreciated
Cheers
Giovanni
Related
when most people call it only displays the number, rarely anyone has the caller ID. i think theres only like 2 people in my contact list that it has their name.
so most people call and it just shows a number, i dont always know who it is.
ive already done the following:
added my country area code and city area code to each contact.
flashed multiple roms (AT&T, HTC, Duty's)
switched from using 3G to Edge and GPRS.
has anyone else experianced this?
I'm guessing they are on the sim? Had the same exact problem and it got really annoying. I had to go and edit every single contact that didn't have the are code. That's what you have to do. It's weird because on the 8525, you don't need that.
kareem9nba said:
I'm guessing they are on the sim? Had the same exact problem and it got really annoying. I had to go and edit every single contact that didn't have the are code. That's what you have to do. It's weird because on the 8525, you don't need that.
Click to expand...
Click to collapse
so you had to give all your contacts area codes? did seem to make a difference for me. if i gave someone an area code it still didnt show when they called.
Exactly. Had to do it for all that didn't have an area code.
mikeeey said:
when most people call it only displays the number, rarely anyone has the caller ID. i think theres only like 2 people in my contact list that it has their name.
so most people call and it just shows a number, i dont always know who it is.
ive already done the following:
added my country area code and city area code to each contact.
flashed multiple roms (AT&T, HTC, Duty's)
switched from using 3G to Edge and GPRS.
has anyone else experianced this?
Click to expand...
Click to collapse
Yeah I notice this a lot living and working overseas.
Some cell networks send the caller ID as a full international number and some send it a local number (as they do here).
Best way I found of is to edit the numbers in Outlook contacts on the PC as it will prompt you for the correct country and area codes into the standard (MS-US) format ie +971 (xxx) xxxxxxxx and the phone then seems to start recognising them.
hi, i just got the 3G service from my local company and it is working fine on my new tilt.
the thing is i have a phone number but i am not able to call it from other phone or receive text msgs. ( i am getting "phone is temporaly unavailable for receiving calls")
i called them and they told me that to have 3g and voice at the same time i have to get another contract for the voice but i will like to use the cards u can buy anywhere.
is there a way i can do it even with the company telling me that i cant ?
also, the guy told me that i have to add a number somewhere in the phone to at least have the text messages services but i cant find where in my tilt.
thanks.
Hi,
Can somebody explain how to setup my diamond so I can call anonimus?
(the reciever may not see my mobile number on his mobile)
Thanks
Unfortunately rather complicated :
Settings-->Phone--> Chose "Caller ID"--> Click "Get Settings"
There you can tell the phone to provide your caller ID to :
- Everyone
- No one
- Only to contacts
Does anyone know of an easier way ? I Hate this procedure.
i believe its a operator svc option.
at least I have to pay locally every month to get this service.
OK... thanks... "problem" solved
JP
On Orange, if you prefix any number by #31# it will call anonymously.
Or on any UK network, you can prefix the number with 141.
pedmond said:
On Orange, if you prefix any number by #31# it will call anonymously.
Click to expand...
Click to collapse
thats a GSM code. it should work in every network.
in some networks you can use #31# and the press send to deactivate CLIP for each call. *31# will activate again. just try it, if it is not working you only get an error message.
I have a tytn 2 that was bought in the UK and is branded vodaphone. I live in aboard and the strangest thing happens. I'm I a counrty called X, if I have a friends number who lives in X stored in the contacts without the country x dialing code the phone recongises the person and displays the name. however if get a text message from the same person the phone doesn't recognize the person. If I have the contact stored with the country dialling code the phone recongises the text message but not the incoming call. Also the phone has a country X sim card in it. Can anybody shead some light on this cause its driving me nuts, I didn't have this problem before in the same country with my previous tytn 1.
Hi guys, i have a HTC Touch Diamond from Telus in Canada. I also have an Asterisk IP PBX at home. I have programmed my PBX to give outside line acces as soon as it see my cell phone number. So, as soon as i call my home phone number with my cell phone, it not ring even once, it give me right away a dial tone to make external call. And in my Telus plan, this number is illimited through Canada. So my question is: is there a way to program or modify my cell dialing rules to always add my home phone number followed by a pause and after that dial the contact or dialed number? It must have a dialing rules files somewhere in the phone? i'm willing to pay for that find. thanx
I use MagiCall for exactly the same purpose as you've described