Related
I am trying to install the PDAMobiz Wizard Crossbow_AKU 3 for G3, I have ungraded from cingular 8125 OEM 2.25 to RUU Molski Biz 226102_22610105_022511_WWE. So my question is on the splash screen (boot up) the info are as follows:
IPL 2.26
SPL 2.26
GSM 2.47.11
OS: 1.5.4.2
WHY is that?
In device Info:
ROM Ver 1.5.4.2 WWE
Rom date: 11/08/05
Radio version: 02.47.11
Protocol version: 4.1.13.24
Ext Rom Version: 2.26.10.2 Molski.Biz.
I can't upgrade to the pdamobiz 3.0 rom? I know it is cid unlock I make sure to run the enable rapi every time i did the upgrade reboot then do the upgrade. I don't know why I can't do it. I did the upgrade fine to pdamobiz 3.0rom for my friends mda. 2 of them to be exact. Help Please. I'm going crazy. Thanks
ok now just flash your phone with an original HTC rom. go get it from there website. now flash that, once you do that....IT WILL NOT lock your phone up. so you dont have to worry about that. and once you flash it with the original rom then you can just flash it to any wizard rom your little heart will be content with. and i learned all this from reading and searching here on XDA.
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Let me be the first one to say it before someone else does... Read the Wiki
Joking aside, you need to give more info such as do you have a G3 or G4? Did you CID unlocked your device? The error you have given usually meant that your device is CID locked.
artisticcheese said:
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Click to expand...
Click to collapse
sounds like you didn't CID unlock before trying to flash a rom that didn't come from your carrier.
and the upgrade tool will not have the right info in those fields. If your phone is unlocked the upgrade will work properly. Make sure you use the correct procedure based on whether you have a G3 or G4 phone.
I have G3 device
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
artisticcheese said:
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
Click to expand...
Click to collapse
What is your IPL/SPL. And how do you know it was never locked? Have you personally unlocked it? Have you ever flashed any rom that was not from your carrier successfully?
If you have a G3 (ipl/spl 2.26/2.26) then I suggest following the full unlocking tutorial thread that is stickied. Trust me your phone is acting like a locked phone. If you haven't personally unlocked it then just humor us and do this. You will be amazed at the results.
If you have a G4 (ipl/spl 2.26.0001/2.26.0001) then you will have to use the pay website to unlock your phone. There is no other known way to unlock G4 devices at this time.
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
artisticcheese said:
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
Click to expand...
Click to collapse
SIM unlock will allow you to use any sim from any carrier without getting an invalid sim error. If you aren't getting this error already you should be ok not doing it but it doesn't hurt to do it since you are in there with Lokiwiz already.
The tutorial tells you to do the SIM unlock first then do the CID unlock.
once you are completely done don't forget to flash up to a 2.x rom (2.26 T-Mobile rom suggested) before flashing a custom rom.
At this point when you flash the custom rom your OS and possibly GSM will change (IPL/SPL may change if you use a rom that includes them)
You should be good to go once the CID unlock process is done completely.
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
artisticcheese said:
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
Click to expand...
Click to collapse
Right now you need to install the button rom again to get both IPL and SPL to 1.05. At that point you can flash back up to 2.26 and then to a custom rom of your choice.
The reflash of the button 1.05 rom is to ensure that you are truly unlocked. you will see that both IPL and SPL go to 1.05 -- this is good
The flash to a carrier 2.x rom is so that you have a good 2.x bootloader and don't inadvertantly flash a 2.x rom without bootloaders into 1.x bootloaders which will cause all kinds of issues.
Yes, you must flash a full 2.x rom before flashing the wm6 rom. The T-Mobile 2.26 is the recommended rom as it has the latest bootloaders available.
Then you go to the rom of your choice and enjoy
I know it's a pain in the behind but it is tried and true
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
artisticcheese said:
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
Click to expand...
Click to collapse
Might have to flash a rom that has an empty extended rom before going to the one you went to. My guess is that the rom you flashed did not include an extended rom and when you flashed it the customizations ran from the previous roms extended rom since it was still there.
Faria's 3.3 v2 has a settings chooser menu so you can select settings for whichever network you are on but that only sets up MMS/GPRS stuff, and doesn't install any carrier specific apps.
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
artisticcheese said:
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
Click to expand...
Click to collapse
2.16 should be fine. It is 2.xx and that is what really matters.
The issue that some people encounter is flashing an AKU2 or higher ROM into 1.xx bootloaders and have all sorts of issues, phone won't charge, radio doesn't show up, pda works but phone doesn't, battery drains quickly and no way to recharge, etc.
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Navyaz05 said:
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Click to expand...
Click to collapse
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck
zabardast_1 said:
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck[/QUOTEA
Ok so I'm downloading NBD V9.2. Now after I flash back to 2.26, then flash the NBD V9.2, am i still going to have the Tmobile look? Just for some reason that really bugs me.
Click to expand...
Click to collapse
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Navyaz05 said:
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Click to expand...
Click to collapse
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Navyaz05 said:
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Click to expand...
Click to collapse
ok
ERROR [208] : FILE OPEN
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
as t-mobile 2.26 flashed and loaded good,than there's no problem with your bootloader,Ok,Now do this,remove your phone from the usb cable(disconnect it) and do a Hard reset of your phone by doing this :-
1. Press and hold the comm manager button and voice command button on the device together with one hand
2.Keep the two buttons pressed,and at the same time,with other hand,use the stylus to lightly press and hold the RESET button
the device will reboot and switch back on.
then delete active sync,reboot your PC,Run disk Clean wizard on Drive C:\ ,check all options in Disk Clean options,specially Temporary internet files and perform disk cleanup,after that delete all cookies in Internet options.
than download the latest version of Active sync ver 4.5 and install.
after this go into bootloader mode in your phone and connect to PC,but don't establish connection with Active sync,cancell the connection when it asks
when you connect witusb you'll see small usb showing at the bottom of bootloader screen (tri color screen) if it's there then open the rom file and try to flash,hope it'll be ok.
just post your present IPL/SPL...? it appears in red color when you switch on the phone and on the boot screen at the top.whatever the ipl/spl..? is there at the moment just post it,ok
I still believe the error 208 is due to some missing files,may be the NBD rom is getting some corruption
anyway you can also download official rom from the official site of your carrier ( the rom which came prinstalled when you bought the phone)
or download this rom and see if it flashes:-
http://forum.xda-developers.com/showthread.php?t=332544
Ipl/spl: 2.26
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Navyaz05 said:
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Click to expand...
Click to collapse
hmmm !
IPL/SPL 2.25 G3 AKU2 version,
ok,now tell me,when you flashed the original rom,was it successful,did it load up ? is your phone working normal with the original rom ?
I just feel as your phone is still not CID unlock,do one more thing,download this WST tool from the link below,install and run it,then post whatever report it generates,ok
http://forum.xda-developers.com/showthread.php?t=329170
Ah 1
so,when you flashed with T-mobile 2.26 you had ipl/spl 2.26,afterwards you flashed back with your original rom,is it cingular rom ? so ipl/spl 2.25 is registered. Both of these Roms T-mobile and original(cingular or ?) which you flashed are official roms.so only official roms are flashing and not the custom builds,hmm, so custom build rom can only be flashed if device is CID unlocked.
It means may be your device is still not CID unlocked ?
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Navyaz05 said:
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Click to expand...
Click to collapse
I do believe you that you did the cid unlock but lets be sure,on the wst tool there is a button with cid action written on it,hit it and tell me the report,ok
Reading CID block...
Calculating CID block sum...
CID checksum: 16A253F6
Decrypted stored sum: 4086926D7FFBD060
Decrypted calcd sum: 4086926D7FFBD060
Key index : 52 - Block index: 196
CIDkey: …øA‰òÏ5
CID IMEI: 356378003310489
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
go to this link,there is a attached file 'RUU MUN.zip' download it,then extract,there will be four files in it,ok now open the NBD 9.2 Rom compare there you will also similar named four files,now replace these files with the files downloaded in RUU MUN.zip,after replace run the new RomUpdateutility.lets see if works,ok
http://forum.xda-developers.com/showthread.php?t=334796
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Navyaz05 said:
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Click to expand...
Click to collapse
replace the files from MUNN with the one in NBD,
just a hunch may be bootloader of your phone not accepting romupdateutility of NBD,lets replace and see,it might do the trick.
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Navyaz05 said:
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Click to expand...
Click to collapse
YES YES YES !!!
You know it got be worried,how come every things fine,your phone is CID unlocked,you can flash T-mobile and official,than why not other custom roms,so I was convinced corrupted romupdatutility,
YUP ! go ahead fire up any wm6 now,I\ll suggest go for TNT excellent ro,see my sig using the same,anyway,i'm glade for you,take care.
Within the past 2 hours, I have flashed 2 ROMS:
1. TNT.19199 Series V.2 (Offcial/Professional/TouchFLO) WM 6.1 Real Port
2. WM6.1 For Wizard OS 5.2.19521 buit 19521 WWE
I did a HardRest to T-Mobile ROM, connected to ActiveSync, went through the XP-ROMUpdate Utility until 100% completed, Clicked on Finished.
Saw the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2.
Then for some unknown reason the MDA restarted and came back up with the T-Mobile Hard Reset Screen and ask for a tap on screen, etc., to go through a total reset back to the T-Mobile ROM.
What did I do wrong?
Even after the T-Mobile ROM reset I still see the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2. screen but then my MDA is displaying the T-Mobile Today screen with the default Today stuff.
What do I need to do?
Thank you.
It sounds like your phone is not cid unlocked
Did you follow these steps for unlocking before flashing ??
http://forum.xda-developers.com/showthread.php?t=298613
Tonis said:
Within the past 2 hours, I have flashed 2 ROMS:
1. TNT.19199 Series V.2 (Offcial/Professional/TouchFLO) WM 6.1 Real Port
2. WM6.1 For Wizard OS 5.2.19521 buit 19521 WWE
I did a HardRest to T-Mobile ROM, connected to ActiveSync, went through the XP-ROMUpdate Utility until 100% completed, Clicked on Finished.
Saw the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2.
Then for some unknown reason the MDA restarted and came back up with the T-Mobile Hard Reset Screen and ask for a tap on screen, etc., to go through a total reset back to the T-Mobile ROM.
What did I do wrong?
Even after the T-Mobile ROM reset I still see the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2. screen but then my MDA is displaying the T-Mobile Today screen with the default Today stuff.
What do I need to do?
Thank you.
Click to expand...
Click to collapse
You are not CID Unlocked !
Read the sticky tutorial before you brick your device
...too slow
anichillus said:
You are not CID Unlocked !
Read the sticky tutorial before you brick your device
...too slow
Click to expand...
Click to collapse
Used WST V 0.4.0.0 and did a CID Unlock and received notification that CID Unlock completed. Do a Soft Reset which I did do.
Tried again to Flash both ROMS and they did show 100% competed/finished.
MDA softreset and showed both first screens of flashed roms, then went into Windows Mobile T-Mobile.
So, what did I do wrong?
This is the message I received after the CID Unlock:
All Done. CID Unlocking is finished and you
can now flash any ROM to your device.
All Done.
Don't forget to soft-reset device!!
A file with new CID value was created.
A backup file was created in program's
folder to restore to previous state.
This is other data:
Wizard Service Tool - 17 Mar 2008 19:00:36
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: xxxxxxxxxxx
=> Bootloader (SPL):
Version: 2.26.0000 (G3 device)
Built on Jun 7 2006 at 19:18:46
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1 (Build 14955)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9dc4a2 - 9.99M (0x9fd800)
aea9b13a - 48.23M (0x303c000)
efb23f92 - 50.95M (0x32f4000)
4fb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000957802013300162f100c05be
Key Index: 8
JUST RECHECKED CID and this is what is shown:
Reading CID block...
Calculating CID block sum...
CID checksum: 23823E0A
Decrypted stored sum: 6705F27B786460AB
Decrypted calcd sum: 6705F27B786460AB
Key index : 8 - Block index: 128
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
So my phone is not CID Unlocked.
Where am I going wrong?
Thank you.
You didn't read the stickies carefully.
You need to flash the Button's ROM to have your IPL and SPL lowered to 1.01 before unlocking!
YUP !
It is must to have IPL/SPL 1.xx to CID unlock the phone,so read the sticky carefully and follow the method correctly.
Cheers!
Thank you both for helping me. I do agree that one should read very carefully. No excuses. However, there is so much to read and so many postings to read from. Again, I do appreciate your help and now I will find the T-Mobile Origirnal 1.xx ROM to load and go from there.
I will post this and I hope I do not get flamed. These are just suggestions from a new person. Please accept them as such.
1. Why did WST display that my MDA was CID Unlocked when it really was not? Should there be an edit up front to check for the correct IPL/SPL?
2. Why did both ROMs go through a complete cycle and then display that the ROM was completely flashed when it was not. Should there be an edit up front to check to ensure that the CID is Unlocked rather than go through all the install?
3. Why did both ROMS leave the splash screen on the MDA? Is there a way to get ride of them?
I know, read the threads before you take any action. Thank you both! You are right.
1.
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
WST does NOT show that it is unlocked...
2. Yes, there is checking in the Original RUU, all RUU in our custom WM6 ROMs are modified to bypass the checking. That's why it won't work if you try to flash another Carrier ROM to your Wizard without replacing the RUU program.
3. Just flash your original ROM (IPL+SPL 1.xx), unlock, and flash it again then you will get back the original splash.
starkwong said:
1.
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
WST does NOT show that it is unlocked...
(Not to disagree with you, but I did get a display that:
'This is the message I received after the CID Unlock:
All Done. CID Unlocking is finished and you
can now flash any ROM to your device.
All Done.
Don't forget to soft-reset device!!
A file with new CID value was created.
A backup file was created in program's
folder to restore to previous state.'
So, WST did display it CID UNLOCKED my MDA. That should be corrected in WST.)
2. Yes, there is checking in the Original RUU, all RUU in our custom WM6 ROMs are modified to bypass the checking. That's why it won't work if you try to flash another Carrier ROM to your Wizard without replacing the RUU program.
(I was addressing not the Original RUU, but the Flashing ROM that does not check or bypasses the checking. Would this help others if this edit was performed prior to executing the complete Flashing?)
3. Just flash your original ROM (IPL+SPL 1.xx), unlock, and flash it again then you will get back the original splash.
Click to expand...
Click to collapse
(Yes, I will do this. Thank you again for your help.)
Don't ever trust the successful message when you unlock CID (This is the same for using LokWiz02 also). Always perform CID check again after unlocking, that is the real status.
Cracking is not easy. Bypassing operations is relatively easy. Adding operations is very hard, so...
starkwong said:
Don't ever trust the successful message when you unlock CID (This is the same for using LokWiz02 also). Always perform CID check again after unlocking, that is the real status.
Cracking is not easy. Bypassing operations is relatively easy. Adding operations is very hard, so...
Click to expand...
Click to collapse
You are correct. One must never ASSUME that something is done. I wonder how many others have fallen into the same trap?
Latest status for me now is that I have:
IPL 1.08
SPL 2.26
01.0.9.10
2.26.10.2
So, I am back to the drawing board and trying to flash again. Tried WST and TNT and still did not take.
Maybe I am doomed to be with what is on the MDA.
Thank you again.
Tonis said:
You are correct. One must never ASSUME that something is done. I wonder how many others have fallen into the same trap?
Latest status for me now is that I have:
IPL 1.08
SPL 2.26
01.0.9.10
2.26.10.2
So, I am back to the drawing board and trying to flash again. Tried WST and TNT and still did not take.
Maybe I am doomed to be with what is on the MDA.
Thank you again.
Click to expand...
Click to collapse
There's no such trap,its just that the method is not correctly followed,either missing doing some step or doing a step incorrectly,resulting in not getting the things done correctly.
WST tool will not work in bootloaders ( multicolored screen) or in the splash screen stuck up.Secondly,TNT Rom is a wm6 rom,it won't flash or work with IPL 1.xx,it has to have IPL/SPL 2.xx and a CID unlocked phone.
after you flashed Button's Rom you got IPL 1.08 and SPL 2.26,reflash the Button's rom a couple of times more to make IPL/SPL 1.xx,it sometimes takes more then one flash to downgrade ipl/spl 1.xx,then apply lokiwiz02b to SIM/CID unlock the phone,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 or official stock rom of your carrier AKU 2 Rom,only then upgrade to TNT series wm6 or 6.1 Rom.
Cheers!
zabardast_1 said:
There's no such trap,its just that the method is not correctly followed,either missing doing some step or doing a step incorrectly,resulting in not getting the things done correctly.
WST tool will not work in bootloaders ( multicolored screen) or in the splash screen stuck up.Secondly,TNT Rom is a wm6 rom,it won't flash or work with IPL 1.xx,it has to have IPL/SPL 2.xx and a CID unlocked phone.
after you flashed Button's Rom you got IPL 1.08 and SPL 2.26,reflash the Button's rom a couple of times more to make IPL/SPL 1.xx,it sometimes takes more then one flash to downgrade ipl/spl 1.xx,then apply lokiwiz02b to SIM/CID unlock the phone,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 or official stock rom of your carrier AKU 2 Rom,only then upgrade to TNT series wm6 or 6.1 Rom. Cheers!
Click to expand...
Click to collapse
Well I finally flashed TNT 19199 Pro and it did install completely. I did use Button ROM which installed 1.08, 2.26.010.9.10 and 2.26.10.2. Then I used WST to CID unlock. Then I flashed TNT.
The main reason for me trying to flash a new ROM was that my MDA Touch Screen capability is very sporadic. It works some times, but not all the time. The only way I can get it to work after the Touch Screen is no longer touch sensitive, is to re-flash. I know that is not practical, but I want to try to resolve this Touch Screen problem.
Even after this latest Flash of TNT, I am still experiencing the same Touch Screen problem of not recognizing using the stylist.
Any suggestions? I assume that it is a hardware (MDA) problem and not a software (ROM) problem.
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
logank said:
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
Click to expand...
Click to collapse
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
zabardast_1 said:
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
Click to expand...
Click to collapse
Thank you , zabardast_1 for your prompt and detailed response. I will PM "mestrini".
BTW, Is there any way to remove HardSPL without activesync ?
And thanks once again.
HARDSPL
How do i carry out HARDSPL on the phone which cannot boot becuase i am not able to connect using the microsft Activesync. Please assist my phone is a G4 and CID locked.
Hamid
Hi Everyone
My Kjam is also stuck on 2nd screen and i can not got any idea that how and what can I perform task to get its back original form. I read most of forums but still i am blank. please guide me what i do..........?
thanks in advance
Hi,
If your device is a G4 try this:
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
3- Try to enter to bootloader mode. The bootloader can be entered by holding the "Camera" button while resetting.
4- Copy the Wizard Love ROM's nk.'nbf' file to the ROMUpdate Utility V2.5.2 .
5- Run the 'romupdateutility.exe' and then follow the instructions of the application.
Best Regards.
Hi md_bluelily
Thanks buddy for your precious time.
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
Dear i try to find these, but there are lot of links i found
So please send me a suitable link of it. specialy Wizard Love Rom for IMATE KJAM G4 CID LOCKED DEVICE
thanks regards
Hamid
Here you can download Wizard Love ROM (G4 Only I think).
And here you can download ROMUpdate Utility V2.5.2 from attachment.
I was unable to get my PPC repaired myself so i took this paid favour from market with original and official WM5, details
IPL 2.26.0001
SPL 2.26.0001
OS 2.16.9.1
GSM 02.07.10
I was unable to use utilities and ROM provided by you cuz the PPC was not with me at that time. The guy who repaired my PPC said he was unable to install WM6 on my mobile. Now my mobile has following characteristics got using
Wizard Service Tool v4.2.2
29/09/09 18:59:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356xxxxxxxxxxxx
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Built on Jun 7 2006 at 19:17:57
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.16
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.16.9.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4ea09fda - 9.99M (0x9fd800)
8ea9e13a - 43.24M (0x2b3e000)
2fb25f92 - 50.95M (0x32f4000)
8fb25f3e - 2.94M (0x2f0000)
8fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000009b1c01023b3b03ccxxxxxxxx
Key Index: 60
All Done.