Database Develop

Problems Updating ROM

Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis

have you tried changing your use cable? Seems like it's the source of the trouble...

dbleliev said:
Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis
Click to expand...
Click to collapse
Have you tried flashing an "official" 2.xx rom?
--M

I did all of that... but still no succes.... Anybody have other solutions??
Thnx

Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.

Read this, at the bottom of the file are the error-codes and try to use another USB-port (preffering at the BACK! of your PC)
ftp://xda:[email protected]/Wizard/Roms/ROM/Update Utility Readme.rtf

nabibakhur said:
Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.
Click to expand...
Click to collapse
Maybe try to use activesync 2,5 beta.

Actually, I have the most recent ActiveSync beta and all. And that nice ftp link doesn't work, which I've noticed seems to be the case most of the time.
Can I download that file elsewhere?
I've actually plugged the USB cable in every USB port I have to test that theory and still no-go.
I'm currently on the phone with T-Mobile PDA Tech Support ( BLECH! KILL ME NOW! )
If I get a solution I'll post it and a walkthrough on how to fix it.
Ok, so, just got off the phone with the T-Mobile PDA Tech Support people and here's the lowdown...
It's the phone itself. Somehow my phone is bugged, go figure. Sorry to break the news to the guy who started this thread, but hey, I'm getting a free T-Mobile Dash out of it

help please :) touch flocube + Tomtom problems

another newbie post here, but despite having a read and asking before i'm still having problems.
touch flocube
i have this installed, but when i go to the media page, i get M0000, P00000 and V00000 rather than any names of files or anything more meaning full.
i have uninstalled and re-installed it, and in every other way the cube works fine, but i cant resolve this problem. anyone got any suggestions for me?
TomTom
as i have an orange supplied phone in the UK, i didnt get tomtom with mine. i have tried downloading 6.032 (i think) and got the message saying my rom needs to be updates.
a few people have suggested installing 6.03, but i cant find any legitiamte links for this, or a definite answer that this one will work. Any suggestions??
thanks in advance for any help

anyone any advice???

Not sure about your 1st problem (touchflo) as I don't use it on my Kaiser, however, try this for TOMTOM (6.032). It's the one I use without any problems.
However you will have to download the Map from here (for UK & western Europe. If this isn't your map, just do another search for your desired place).
And if you have any problems with it, PM me and I'll try and help...

thanks for those, but i cant download torents at work
anyone got a clue on my cube problem?

Fring: Will not launch on my Wing. seems to be common problem. Any fixes?

Hello,
I downloaded Fring off of their site, installed the file. Its on my 'desktop' now with an icon and says 'fring is currently offline'...
When I click it, i get a progress icon and then nothing. When I find it in Programs and open it, i get the same thing. I never get any login windows or anything. I am always successfully connected to wifi when I do this.
Is there something I am missing? Do I need to change any memory settings or anything? I am pretty much running my Wing with 'out of the box' settings.
Any thoughts or suggestions greatly appreciated.
chris

I just installed it and ran it with no proble ............. try going to fring.com on your device and download the .cab file from there and re-install it

tried that twice now... seems after the install, it starts up fring and i get the FRING IS LOADING screen but it goes no further. Is this app a memory hog or something? Or is it just buggy?

Similar complaints on the Fring forums
http://www.fring.com/forums/showthread.php?t=3145
Last post is from someone who has your same issue on the Wing. I've got a Hermes (TyTN) and it doesn't start on that device either (splash screen pops, then program dies with no error messages, etc.)
Sounds like fring has known about this for awhile but no progress so far Fring support referred me to their blog, but nothing of use their, nor in the forums from what I've found so far:
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Click to expand...
Click to collapse

Not that this helps you much, but Fring worked great first time on my Wing. But then it stopped connecting shortly thereafter, just like you described. But then I uninstalled/reinstalled Fring and it has been working since.

SOLVED
I just solved that problem.
The problem was the program VoipAudiosrv, an error with that program. Just uninstall fring AND voipaudiosrv, restart your phone, and reinstall fring. You will be asked to re install voip audio srv: do it. Now it should work.

I Can't Connect my Tilt...HELP!!

I've searched for an answer in these forums and can't find one. I have tried some suggestions from here to no avail. Well...here's the problem. I've had my Tilt for a couple of months. All has been great and i love it...up until now.
I've put several roms on it and they've all worked fine. Got that down...I thought. I can't get activesync to see the tilt on any of my computers. It won't find it on the laptop I've been using to load. My desktop at work, that I've been using sometimes to load it, won't see it and it won't even connect on a new computer in my office with fresh ASync 4.5. Like I said....it has been working fine I just decided today to load a new Dutty rom and I can't even hook up. Wow....this is so aggravating. I've uninstalled and reinstalled several times. Activesync is still on the tilt too. I've killed the program in taskmgr. I've stopped all running apps in the tilt. I have 2 different cables also. By the way....I don't care to wipe it clean...if I need to. Any suggestions as to what I can do? If anyone's got any clues to what my problem could be I would be eternally grateful. Thanks in advance for responses.

Desparate!
Please help me....if you can. I know there's a tremendous amount of knowledge here. Surely someone's been through this same problem and was able to fix it. I've seen another post similar to this and he's not getting an answer to his problem either. If I we need to contact HTC....please recommend that. Some of you "tilt masters" please respond. Thanks in advance.

Also I had a similar problem and i had installed a blackberry program on my tilt. That created a connection problem between my tilt and the sync program and it couldnt see my tilt. I figured out that the blackberry desktop program thought it had dibs on my tilt because the bb was on my tilt. I removed the BB off my tilt it did a hard reset and then proceeded to manually remove every windows mobile device partnership there were many. Rebooted my computer and tried it again and it worked. You could try a hard reset and then and then use system restore to a few days before you had the problem and see if you can trick it.

I had this problem.
Hard-Reset fixed it

Thanks for the replies....I've tried the hard reset twice and that didn't work either. Have been on the phone with HTC support and we did several things. Still not working. He was supposed to call me back in 10 min but didn't for a couple of hours. Anyway...I've got to contact them back and take up where we left off. Surely we can get this thing going again. If HTC can fix it....no one can. When we get it up and going...i'll report back here for others future needs. The phone works great besides that!
Again thank....and anyone else have a suggestion.

Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679
Thanks..

Check the USB pins on the unit, mine were bent down and did not make contact, i think from memory the 3rd pin in is the data connection.
Derek

sync issue

ok so i have windows xp sp 3 since yesterday ive been having issue with my tilt sync with my computer i did everything to my tilt even hard resting and i still get and messagine saying one of the usb deviecs attached to this computer malfunctioned so i checked the dievce manger and it telling me no driver are installed so i unstalled autosync and re installed and i get the same thing so now im pretty stomped i have the lastest verson of romeos

Good old SP3. It has caused a lot of issues for people.
So, did you SEARCH before posting?
Try this, http://www.google.com/search?hl=en&as_q=SP3+activesync&as_epq=&as_oq=&as_eq=&num=10&lr=&as_filetype=&ft=i&as_sitesearch=http%3A%2F%2Fforum.xda-developers.com&as_qdr=all&as_rights=&as_occt=any&cr=&as_nlo=&as_nhi=&safe=images, read and learn.

kimtyson said:
Good old SP3. It has caused a lot of issues for people.
So, did you SEARCH before posting?
Try this, http://www.google.com/search?hl=en&as_q=SP3+activesync&as_epq=&as_oq=&as_eq=&num=10&lr=&as_filetype=&ft=i&as_sitesearch=http%3A%2F%2Fforum.xda-developers.com&as_qdr=all&as_rights=&as_occt=any&cr=&as_nlo=&as_nhi=&safe=images, read and learn.
Click to expand...
Click to collapse
i already tried the SEARCH im not a noob who seaches for 10 min and give up i tried everything disable firewall still nuthing idk what else to do besides going back to sp2

Ok. I didn't mean to offend you. Sorry. There are a lot of folks that post before searching.
What version of ActivSync are you using? Apparently SP3 only works with the newer version of ActiveSync. Did you download the newest ActiveSync from M$? Maybe reboot after the install.

I just noticed your sig. I use ROMeOS, too. It is the best! Maybe try installing the newer version of the ROM. Then try ActiveSync before adding any other programs to the phone. It is possible that your issue is being caused by a third party app.

no i hard rest my phone so there isnt any 3rd party aps on it and i use auto sync 4.5 the newset one i download it twice i dono what else to do nuthing works i think i might get another usb cord

0_o im so pissed so i got another usb cord and it works i feel like the biggest danm noob around hahah im going to shot myself lol

**Quick Intervention** Do not shoot yourself.
That is an odd one. Glad you got it fixed. Now if only the next guy does a search and finds this.