I have MioMap along with udKs 6.1 rom...the HTC Home plugin interfere with my gps software MioMap..I have to unload Home and reboot before I can load MioMap otherwise when I click it..it does nothing...Is there any way I can have Home on and MioMap to run?
Thanks!
read this:
http://forum.xda-developers.com/showthread.php?t=368179
as igo and miomap use the same core, the so-called solutions should
work for you as well.
i did some trial and error and think i found the solution. i disabled the miomap today plugin and now it works. htc home also enabled.
contentryder said:
i did some trial and error and think i found the solution. i disabled the miomap today plugin and now it works. htc home also enabled.
Click to expand...
Click to collapse
did this too. Didnt work for me.
Has this been solved yet? Is there a new build of Mio Map that works? Currently im using Leo v9 diamond and still wont launch with HTC home enabled.
Praygo said:
Has this been solved yet? Is there a new build of Mio Map that works? Currently im using Leo v9 diamond and still wont launch with HTC home enabled.
Click to expand...
Click to collapse
yes there is.
....moving to Kaiser Software
AllTheWay said:
yes there is.
....moving to Kaiser Software
Click to expand...
Click to collapse
The new build solved it or your just saying in general its been solved?
Related
It's been discussed a lot in the release but has anybody actually found a fix that will let you use iGO when HTC Home screen is enabled? To use iGO, i have to remove the plugin, uninstall, and reinstall--what a pain. Anybody find a fix?
kareem9nba said:
It's been discussed a lot in the release but has anybody actually found a fix that will let you use iGO when HTC Home screen is enabled? To use iGO, i have to remove the plugin, uninstall, and reinstall--what a pain. Anybody find a fix?
Click to expand...
Click to collapse
If you can't use Igo with HTC home enable, then just disable it. Run Igo, and close it. Then enable back HTC home, now you should able to run Igo without disable HTC home. Hope this help, it works for me.
Igo runs without disable htc home with Dutty's latest rom.
Hello again, another problem with the official HTC 6.1 Rom update ... IGO 8 does not work anymore ... I re-installed the whole software but the problem is the same : when I launch IGO 8, nothing happens ...
Does anyone else had this problem ?
i had this before with previous wm6.1 roms. you need to use kaisertweak to disable assisted gps.
http://forum.xda-developers.com/showthread.php?t=370884
Thanks a lot for your answers ...
I had to disable A-GPS and the "HTC Home" on the today screen.
But it only works if after having disabled the "HTC Home" I soft reset my device.
That means I will not use IGO 8 anymore, and this is a big issue for me because that was my favorite GPS application.
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
arnoo said:
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
Click to expand...
Click to collapse
Thanks for your answer. I will try it but I don't really like this kind of applications. I tried one of these "cube" applications, and I noticed that it was slowing down some other applications using the touch screen like "pencil box" for exemple.
arnoo said:
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
Click to expand...
Click to collapse
OK, I tried : Ultimate Launcher does not affect the performances of the other applications, very good point.
IGO 8 works fine. But when I try to display the HTC HOME inside UL, IGO 8 does not work anymore ... So your solution does not work for me.
bizarre bizarre...
perhaps you have taskmanager bigbuttons installed?
perhaps you have sync kaiser and launch igo just after? try to perform softrestet before launch igo
I tried all of that, but still unsuccessfully ...
Try disabling the HTC Home music tab. That worked for me.
I had the same problem. Here are the fixes, choose which one suits you best (no need to use them all):
Disable HTC Home. Sometimes it's enoughto disable only some of its plugins (weather, music etc.). I like HTC home, though. This works, but i prefer other solutions.
Put a shortcut to iGo8 in your /Windows/StartUp folder. Pro: After you reset once - yuou can work with iGo8, close it, restart it etc. - no probs at all. Con: Every time you reset, iGo8 starts (so you lose a few seconds in life). This is what I use, and it works gr8.
Just heard that the June 2008 version of iGo8 works well with WM6.1 and HTC Home. My version is older. Didn't try this one yet.
Good luck!
latest patch of igo8 (24 june) version fixes the problem with htc 6.1 / home editions...
But i have 6.1 and TF2D Manila installed and iGO 8.3.2.xxxx and it works fine.
How come?
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE
update to newer version (8.0.0.44366) or disable HTC home from Today
paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
Click to expand...
Click to collapse
U are in the wrong section. This is Kaiser thread.
sorry about that. i am new here. maybe a mod can help me by moving it to the right place.
paulyluca said:
sorry about that. i am new here. maybe a mod can help me by moving it to the right place.
Click to expand...
Click to collapse
its all ok, just post your question in the touch pro section.
But I think its not necesary, u already have the answer.
Moved to Raphael, aka Touch Pro, Forum.
HTC Touch Pro do not seem to have HTC Home. In the "Today" settings, there is the HTC Touch Flo enabeled. I tried to runn iGO with it desabeled, but no succes.
So, I think there must be some other way...
Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)
clandestino_usr said:
Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)
Click to expand...
Click to collapse
Thank you so much!!!
Got it working now....
Just a quick question, does it work in landscape mode on the touch pro?
Uhm, I don't know why it isn't working for you because on my Touch Pro it works great. Just installed it, copied the appropriate files for my country (the Netherlands) into the appropriate dirs as mentioned in the readme and that's it. Uhm, no, I had to set the GPS on com4 in iGo8 to get the gps working but that was all I had to do.
paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE
Click to expand...
Click to collapse
l0st.prophet said:
Just a quick question, does it work in landscape mode on the touch pro?
Click to expand...
Click to collapse
Just tried it. Works great in landscape too.
Can you confirm that the maps render and scroll smoothly when navigating now unlike the jerky movement you have with the Kaiser?
I can't compare with the Kaiser, I never had one. But map scrolling seems ok to me.
Hmm I got the same problem.. How do you actually update it?
I just bought my htc pro touch so bear with me please.
i installed it. everything seemed fine, i click on it, i get a loading icon, nothing happens.
Keyboard?
Hi,
iGO8 seems to work, but I can't get the hw keyboard to function. Not one key seems to respond. Does everyone else have this problem?
Thanks,
Cheers,
Cacti
i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
is the co pilot 7 better than igo8? in terms of usability by someone who doesnt understand how all this works
I have tested iGO8, TomTom 7, and Garmin XT. All work fine on the Touch Pro (but I did not test hardware keyboard input).
In my case, I found Garmin to have the best GPS performance: only 2-3 seconds lag behind my separate Garmin nuvi 760 unit, and <30 secs for first fix most of the time. iGO and TT are a little slower but still work fine -- but other people find iGO or TT to work very well.
Other thoughts: TT has the most detailed roadmaps, iGO and Garmin are average. But I find Garmin has the best POI support. iGO (and I think TT, also) supports TMC but (so far) it cannot be activated on the Raphael. Garmin does not have TMC but can download traffic from its servers via your data connection (3G, EDGE, etc). For me, Garmin is a solid middle-of-the-road software; the only major drawback is no TTS, which iGO and TT both have.
I haven't tested Co-Pilot 7, but since it's based on iGO core (iirc) I probably won't try it. But of course, you should try demo maps or at least read reviews to find out which software is good for you.
stranger stel said:
i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
Click to expand...
Click to collapse
To help clarify, there are two separate issues. The first is that many GPS software comes on SD cards that are intended to be kept on the SD, or on CD to be installed to main device memory, though if you buy it you have every right to install it to your Raphael. Since the Raphael only has microSD, you may have to install the program in a certain way to get it running. You also have to be careful of the software version, since not all are compatible with WM6.1. (These issues come up all the time among people pirating the software.)
The other issue is about the GPS receiver in the Raphael. Lots of people are trying different tweaks to get the best performance (ie: no lag) out of their receiver. But it's unclear if it's a problem with a weak antenna, or if certain programs (iGO, Garmin, TomTom) run better/worse on the Raphael. The results have been somewhat mixed but we're gradually figuring everything out.
Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.
aznfrenchboyca said:
Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.
Click to expand...
Click to collapse
Just install a newer wersion: 8.0.0.44366 or 8.0.0.54000 and it will work just fine.
Hi My friends,
I need help. I changed my rom yesterday official at&t 6.1 Rom and today I changed with HyperDragon III OMNIA WM6.1 WWE ROM Full Version.
I tried to install IGO 8 and IGO2006 on both Roms but it doens't respond.
Any problem on IGO with WM6.1 Roms?
Please help me to fix.
It is running but no positioning
Now I have fixed the problem, I installed Dutty's rom.
Program is running. But now it is not positioning... The weather is a little cloudy, any problem with weather?
Please help me
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
mskip said:
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
Click to expand...
Click to collapse
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Today I have just tried. It is working.
I tried many GPS programs, I think VisualGPSce is very fast for locking. Just for 8-10 sec for locking. GPSgate hasn't locked.
Thanks...
I've got wm6.1 and iGo from jan/febr was working ok,
now i tried to run it after half year and just window's pending symbol appears for half sec and nothing.
Tried to DL new iGo, new install. still not working.
no ROM change/no hard reset meantime.
but gave it up quickly, i don't need it now. just was curious.
here is a solution I found on the net ...
1. Turn off the HTC Home on the Today screen and change Appearance from HTC to WM6.1 (or default)
2. Softreset.
Also turn off AssistedGPS (AGPS) using KaiserTweak. I tried that & it worked for me (& on my wife's Tilt).
I have also found that Microsoft Voice Command can intefere with iGo8 it took me ages to figure that out in the end i had to turn off all the options apart from the phone settings which are the only ones i used anyway and that fixed it.
mskip said:
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Click to expand...
Click to collapse
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Dr4g0n75 said:
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Click to expand...
Click to collapse
Which version are you running?
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
do you need any other info?
disabling HTC home worked in my case.
all versions I have work now. just no maps for me still there
tomtom garmin xt and google maps all work fine... just igo isnt working properly... this program is my favorite gps tool any help would be greatly appreciated... thanks guys
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
tried that... no go for me
Thats really wierd I have a kaiser with manila2D running with all my other crap installed and igo8 works perfect for me. Just the wait the first time it ran to gather contact info but then no problems at all. Im running 8.0.0.49545 (july 30 3008) with tts voices and the ultra skin v5
Try disabling MSVC if you have it and see if that makes a difference.
I have had the same problem. I ended up getting the Sept 1 update of Igo8 on it works perfect on mine using hyperdragonIII and NATF v3. Im sure you can find it.
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
what version of wm are you running? it looks like only hyperdragon III is working...
Hi,
A long time i have worked with SPB shell on my diamond,
But after a while it gets slow and boring
So i went searching and i found things about 3d touthflo or manila.
So is there someone who can tell me what is the latest version of HTC home software for my diamond?
And where can i get it
burnacid said:
Hi,
A long time i have worked with SPB shell on my diamond,
But after a while it gets slow and boring
So i went searching and i found things about 3d touthflo or manila.
So is there someone who can tell me what is the latest version of HTC home software for my diamond?
And where can i get it
Click to expand...
Click to collapse
you get tf3d with your diamond go to settings, today, untick the box next to spb mobile shell and tick the box next to touchflo 3d
I know but that aint my question.
I asked:
So is there someone who can tell me what is the latest version of HTC home software for my diamond?
Click to expand...
Click to collapse
burnacid said:
I know but that aint my question.
I asked:
Click to expand...
Click to collapse
speaking to people like that will not get you anywhere if you wanna be like that use google
its not htc home & you cannot install another version of tf3d over an existing version, if you want a newer version you will have to flash a new rom