Hey guys, I'm looking for a profile switcher that has the following:
(a) a today component (preferably just one line)
(b) allows for the selecting of a profile temporarily (meaning after xx minutes it would revert back to normal like MeetingMute did for WM2003)
(c) allows for the automatic flipping of the screen (e.g. car profile reverts the screen into landscape mode so I can lay my tilt on the dash)
I am aware of phoneweaver and spb phone suite, but they both lack the last component and I believe they dont allow for the temporary profile...any one got something like this?
Forgot to mention I need it on a 6.1 rom for Kaiser
Hmm, yeah. Last component could be tricky. I just bought Spb Phone Suite tonight. It does allow for temporary profiles but it works in intervals of 5, 10, 15, 30 and 60 minutes. You can also set up one of the automatic profiles to start and stop at specific times of the day. The only problem with that is that it can only be one specific schedule. All it would really be good for in my opinion is maybe setting it up to be silent during the hours you sleep or something.
PhoneWeaver can rotate the screen
ajmoncrief said:
Hey guys, I'm looking for a profile switcher that has the following:
(a) a today component (preferably just one line)
(b) allows for the selecting of a profile temporarily (meaning after xx minutes it would revert back to normal like MeetingMute did for WM2003)
(c) allows for the automatic flipping of the screen (e.g. car profile reverts the screen into landscape mode so I can lay my tilt on the dash)
I am aware of phoneweaver and spb phone suite, but they both lack the last component and I believe they dont allow for the temporary profile...any one got something like this?
Forgot to mention I need it on a 6.1 rom for Kaiser
Click to expand...
Click to collapse
As the title says, the latest version of PhoneWeaver will rotate your screen, but I don't think it allows temporary profiles like your description, (though it is a simple tap of the home screen plug in to change it manually to any profile, then back again).
mortalwombat said:
As the title says, the latest version of PhoneWeaver will rotate your screen, but I don't think it allows temporary profiles like your description, (though it is a simple tap of the home screen plug in to change it manually to any profile, then back again).
Click to expand...
Click to collapse
I'm using PhoneWeaver (the latest version) and if I understand your requirement correctly, it fully supports temporary profiles. But you can install a fully functional demo for 30 days for free AFAIK.
HTH
joshuah82 said:
Hmm, yeah. Last component could be tricky. I just bought Spb Phone Suite tonight. It does allow for temporary profiles but it works in intervals of 5, 10, 15, 30 and 60 minutes.
Click to expand...
Click to collapse
It does? I've been using it for 7 months and haven't found that feature :s
I am gonna be looking (currently on 1.3 beta 1), but if you feel like enlightening me....
I'll give the latest phoneweaver a shot tonight, the time I checked it was at version 1.1, so maybe 1.2 will have everything I need. Thanks for the suggestion, I'm still entertaining others just in case cause I really missed meeting mutes interval silent feature which was great if I only wanted to mute it for 2 hours (i.e. at a movie) and wanted it back to normal after that.
ajmoncrief said:
I'll give the latest phoneweaver a shot tonight, the time I checked it was at version 1.1, so maybe 1.2 will have everything I need. Thanks for the suggestion, I'm still entertaining others just in case cause I really missed meeting mutes interval silent feature which was great if I only wanted to mute it for 2 hours (i.e. at a movie) and wanted it back to normal after that.
Click to expand...
Click to collapse
The latest version is 1.2.1 (unfortunately only available in the forum not on the main download site): http://forums.sbsh.net/index.php?showtopic=21055
Cavey.co.uk said:
It does? I've been using it for 7 months and haven't found that feature :s
I am gonna be looking (currently on 1.3 beta 1), but if you feel like enlightening me....
Click to expand...
Click to collapse
I'm using v1.2.1 and in the profile definition on the "Profiles" tab I have an "Timeout" option. Meaning I can switch from profile A to B and if profile B has defined a timeout of 60mins it will automatically revert to profile A after that time.
DeepThought said:
The latest version is 1.2.1 (unfortunately only available in the forum not on the main download site): http://forums.sbsh.net/index.php?showtopic=21055
Click to expand...
Click to collapse
Many thanks...trying now
ajmoncrief said:
Hey guys, I'm looking for a profile switcher that has the following:
(a) a today component (preferably just one line)
(b) allows for the selecting of a profile temporarily (meaning after xx minutes it would revert back to normal like MeetingMute did for WM2003)
(c) allows for the automatic flipping of the screen (e.g. car profile reverts the screen into landscape mode so I can lay my tilt on the dash)
I am aware of phoneweaver and spb phone suite, but they both lack the last component and I believe they dont allow for the temporary profile...any one got something like this?
Forgot to mention I need it on a 6.1 rom for Kaiser
Click to expand...
Click to collapse
I use WinMobileApps Profiles for Windows Mobile v2.0.0. You can set Portrait or Landscape for any profile, and it has a nice simple one line Today plugin. It doesn't have temp profile, but does have revert to scheduled. It also has a command line parameter that can run a specified program or script when you switch to a particular profile. Works on 6.1.
Ok looks like both the WinMobileApps and PhoneWeaver both do all of the above. I ended up going with phoneweaver though because of other options. Thanks to those who were able to enlighten me on the newer versions
ajmoncrief said:
Ok looks like both the WinMobileApps and PhoneWeaver both do all of the above. I ended up going with phoneweaver though because of other options. Thanks to those who were able to enlighten me on the newer versions
Click to expand...
Click to collapse
I'm glad I could help!
PhoneAlarm is a good choice too. It does tons of things besides profile switching (repeated alarms of missed calls, sms, mms, email, traffic cost/counter, etc). There is a free version too.
It's really nice but tends to slow the Today screen only when you change/move plugins or softreset. Other than that it's really nice.
You should give it a try.
solution for u
ajmoncrief said:
Hey guys, I'm looking for a profile switcher that has the following:
(a) a today component (preferably just one line)
(b) allows for the selecting of a profile temporarily (meaning after xx minutes it would revert back to normal like MeetingMute did for WM2003)
(c) allows for the automatic flipping of the screen (e.g. car profile reverts the screen into landscape mode so I can lay my tilt on the dash)
I am aware of phoneweaver and spb phone suite, but they both lack the last component and I believe they dont allow for the temporary profile...any one got something like this?
Forgot to mention I need it on a 6.1 rom for Kaiser
Click to expand...
Click to collapse
pocketmax.net
Related
I was researching SPB mobile shell because i heard alot of good news about it. Now most of the stuff that it offers is already given from the get go on the Kaiser.
Is there anything else on Mobile shell that is not offered already by the Kaiser that is a must have or very helpful?
While i'm at it, is there any other good programs that you would think are 'must have'?
Thank you in advance!
i like mobile shell and also diary and weather from spb but i am having a few issues. The weather tab is black text and doesnt stand out from the black background. Also, when i have spb weather installed i cannot figure out how to resize the weather tab so diary goes up further. I would just use the htc home screen but the dang clock is too big
Subscribe to Club Spb and you'll find the solution to your black text problem. There's been a release that addresses the problem.
I use the following:
P+ for the battery indicator, safe mode, and PIE extensions. Everything else is off.
Shell for the Today plug-in. The menu thing and wake-up screen are off.
Phone suite as a tab (first) in Shell.
Diary as a tab (second) in Shell showing only calendar, tasks, special events.
Weather as a tab (third) in Shell.
Shell's 'main' tab as number four.
On my Today screen, I have the date, then Shell. Auto-hide is off for Shell, and Diary is set to like 172 for height.
It's the perfect setup.
Nice indeed, i'll use the same setup as yours for a bit and see how convenient it is. (however i don't see the use of installing P+ in order to have the battery bar since mobile shell show the battery icon with the percentage).
Thanks for the idea
Oh, will have to look for that black text fix, that must be pretty new. I prefer keeping Diary below the mobile shell stuff as it's my primary Today screen tool. I'm trying different apps for profiles, the SPB one is a bit too simplistic for me, and mobile shell already has things like photo quick dial.
There is definitely some overlap in features!
Phone suite works for me. I like the auto profiles (meeting marked as busy puts phone in silent mode, etc.) and other notifiers. edit: also forgot about radio on/off's on the plug-in.
I forgot to mention the close button for P+ - I use that all the time.
Used to be a die-hard Diary guy. Now I find myself just using the PocketInformant list view instead. It's easier / more detailed. I could probably remove Diary and miss nothing.
I used the SBSH stuff for a long time, too. Paired with WisBar Advanced. Didn't want to suck up that much memory / CPU on my new device.
The HTC Home plug in is great, but Mobile Shell is much, much more powerful, particularly if you pair it with other SPB products that it can use as plugins. I've got PocketPlus for a range of reasons, and having 4 Mobile Shell tabs + PocketPlus tabs means two to three tap access to everything I want.
I did like the HTC Home as a freebie, but the SPB stuff just goes much, much further.
I've tried SPB Phone Suite and it does not handle the radio/bt/wifi switching well. For now I am trying PhoneAlarm and it seems to be good. radio/bt/wifi switching works correctly. I also like that it is possible to have bt automatically switched on during a call (for using a headset) and then off after the call ends. This is a good power saver.
One question: If I disable the HTC Home plugin from the today screen in order to try SPB Mobile Shell, will the HTC plugin still be running (in the background) in program memory?
I have had ZERO issues with radio control using Phone Suite. Everything goes on and off as it should. Is it possible you're using an older version?
sgt-spam said:
I have had ZERO issues with radio control using Phone Suite. Everything goes on and off as it should. Is it possible you're using an older version?
Click to expand...
Click to collapse
No, I downloaded the latest available from the SPB site. I also soft-resetted to be sure. Perhaps mine is a one-off case?
To be more precise, my problem with Phone Suite is that for example I am in Normal profile with Wifi off. I have a scheduled appointment that will trigger the Meeting profile, and Wifi is turned on with the Meeting profile. However Wifi is not being turned on with the Meeting profile or any other automatic profile. It works normally with an explicit manual profile change. Anyone experiencing the same issues with SPB Phone Suite?
leon100 said:
I have a scheduled appointment that will trigger the Meeting profile, and Wifi is turned on with the Meeting profile.
Click to expand...
Click to collapse
So under the Automatic:Meeting profile, the selector for WiFi is "On" rather than "Unchanged?" And that's not causing WiFi to go on? I'd e-mail support and let them know. Since it's a new device on a relatively new OS, they may have some fixing to do.
Out of curiosity, I do have to ask why you're having that go on automatically, though. That's going to drain battery relatively quickly compared to standard operation. And when you're in a meeting do you always have a WiFi connection available? I typically don't, but I'm on client sites that either don't have it or have it but don't permit access. And if you're in a meeting, why are you surfing anyway?
I haven't noticed the issue myself. Do you have PA and PhoneSuite installed simultaneously?
PerfAlbion said:
So under the Automatic:Meeting profile, the selector for WiFi is "On" rather than "Unchanged?" And that's not causing WiFi to go on? I'd e-mail support and let them know. Since it's a new device on a relatively new OS, they may have some fixing to do.
Out of curiosity, I do have to ask why you're having that go on automatically, though. That's going to drain battery relatively quickly compared to standard operation. And when you're in a meeting do you always have a WiFi connection available? I typically don't, but I'm on client sites that either don't have it or have it but don't permit access. And if you're in a meeting, why are you surfing anyway?
I haven't noticed the issue myself. Do you have PA and PhoneSuite installed simultaneously?
Click to expand...
Click to collapse
I don't actually have the need for WiFi to automatically switch on with the Meeting profile. It's just that as a developer myself I tend to go over an application to see if all functionality is as it is supposed to be. It just sort of 'irritates' me when some things don't work as supposed.
At the moment I have Phone Alarm and Phone Suite installed simultaneously. However I actually tried out PhoneAlarm because of the issues with Phone Suite so PA is not the cause. I presently am trying PS just for the 'Reject and reply with SMS' functionality, and PA for all other profile functionality.
leon100 said:
I don't actually have the need for WiFi to automatically switch on with the Meeting profile. It's just that as a developer myself I tend to go over an application to see if all functionality is as it is supposed to be. It just sort of 'irritates' me when some things don't work as supposed.
Click to expand...
Click to collapse
I'm not a developer, but do much the same to make sure that when I do want to use something, I can. I've a meeting coming up, so I'll change my profile as well and see if I get the same issue.
SPB is normally quite responsive to support issues, so I'd let 'em know and see what's what. They'll probably have a good answer for you.
Hi Leon100,
What version of PhoneAlarm are you using. Is it 1.62.
I am asking this because I tried using PA with my HTC Touch but I notice that with this installed very often the Touch fails to Switch On when I press the Power button. Most of the time needs a Soft Reset. I used the PAy Touch v2 skin and I suspect that the PA Task-Switcher is conflicting with the SPB Plus Task Switcher and causing this "Sleep-of-Death" problem. Do you know of a way to De-Activate the PhoneAlarm Task-Switcher.
will appreciate any help & suggestions
leon100 said:
I don't actually have the need for WiFi to automatically switch on with the Meeting profile.
Click to expand...
Click to collapse
I just checked and noticed two things:
1. Automatic profiles don't "work" unless you've set the profile to "Automatic" on the PhoneSuite Today screen.
2. Once I did that, WiFi fired up for the profile as expected.
So I guess it's worth asking - did you select the "Automatic" profile?
PerfAlbion said:
I just checked and noticed two things:
1. Automatic profiles don't "work" unless you've set the profile to "Automatic" on the PhoneSuite Today screen.
2. Once I did that, WiFi fired up for the profile as expected.
So I guess it's worth asking - did you select the "Automatic" profile?
Click to expand...
Click to collapse
Great, that was it. I thought that since the Meeting profile was an automatic one it would activate by itself. Thanks.
Another question now: Is it possible for bluetooth to be activated only during a call? PhoneAlarm has this facility but I did not manage to find it in PhoneSuite. It would be a power saving facility.
srmz said:
Hi Leon100,
What version of PhoneAlarm are you using. Is it 1.62.
I am asking this because I tried using PA with my HTC Touch but I notice that with this installed very often the Touch fails to Switch On when I press the Power button. Most of the time needs a Soft Reset. I used the PAy Touch v2 skin and I suspect that the PA Task-Switcher is conflicting with the SPB Plus Task Switcher and causing this "Sleep-of-Death" problem. Do you know of a way to De-Activate the PhoneAlarm Task-Switcher.
will appreciate any help & suggestions
Click to expand...
Click to collapse
I have version 1.62. What do you mean by Task-Switcher? If it is the profiles that you mean then most of these can be deactivated, but there has to be at least the Normal profile available. The option to deactivate the normal profile is disabled. You can try to deactivate all profiles except the normal profile, soft-reset and see if this helps.
leon100 said:
Another question now: Is it possible for bluetooth to be activated only during a call? PhoneAlarm has this facility but I did not manage to find it in PhoneSuite. It would be a power saving facility.
Click to expand...
Click to collapse
Not that I'm aware of, no. But I've always got my headset on and haven't run into battery issues, so I wasn't looking for it.
With BT 2.0, I haven't noticed a drain issue, but then I also always have second battery with me just in case.
I previously used SPB Mobile Shell on my rw6828 and had major battery drain problems (which stopped when it was uninstalled).
Is anyone seeing higher battery drain with SPB Mobile Shell on the Kaiser? thanks
matt_g said:
I previously used SPB Mobile Shell on my rw6828 and had major battery drain problems (which stopped when it was uninstalled).
Is anyone seeing higher battery drain with SPB Mobile Shell on the Kaiser? thanks
Click to expand...
Click to collapse
I'm only using the Today plug-in part of Shell, and in general, I have to charge nightly.
Maybe this weekend I'll disable Shell and see how the battery life goes.
Hi all,
Just bought a Diamond in replacement of my Cruise.
This Diamond is beautiful and easy to use but I have not fount a profile application to use with.
I need a profile application that can control Bluetooth, rings and notification volume in profiles like cars, home, work .....
I usually used PhoneAlarm but with the Diamond and the touchflo screen, it is not possible to add the today plugin ...
So I have tried an application called PZP and the PZP Menu software that I launch using a long press on button. this application is great but eavy and slow to load...
So I am now searching an application to manage my profiles through the TF3D (why not ..) or with a button on the task bar for example.
someone has an idea ?
regards
i have this same question and couldnt find the answer. has anyone solved this yet?
fredlamour said:
Hi all,
Just bought a Diamond in replacement of my Cruise.
This Diamond is beautiful and easy to use but I have not fount a profile application to use with.
I need a profile application that can control Bluetooth, rings and notification volume in profiles like cars, home, work .....
I usually used PhoneAlarm but with the Diamond and the touchflo screen, it is not possible to add the today plugin ...
So I have tried an application called PZP and the PZP Menu software that I launch using a long press on button. this application is great but eavy and slow to load...
So I am now searching an application to manage my profiles through the TF3D (why not ..) or with a button on the task bar for example.
someone has an idea ?
regards
Click to expand...
Click to collapse
...sure: Disable the manila plugin ;-)
You could always remap a TF3D soft key to whichever profile switcher application you decide on?
I've tried PhoneAlarm in the past (http://www.pocketmax.net/phoneAlarm.html) but now use Wireless Time (http://freewareppc.com/communication/wirelesstime.shtml) which alters my profiles based on the time of day.
Don't think there is anything integrating tightly within TF3D just yet
I'm the developer of PhoneWeaver (I'll don't put the link to avoid it to be considered SPAM, but it is public that beemer=miguel). I think it is the best profiler program in the market and I can tell you as a secret that as long as I have a Diamond as my personal phone, current version works well on it and next version will be fully optimized
burnso said:
You could always remap a TF3D soft key to whichever profile switcher application you decide on?
I've tried PhoneAlarm in the past (http://www.pocketmax.net/phoneAlarm.html) but now use Wireless Time (http://freewareppc.com/communication/wirelesstime.shtml) which alters my profiles based on the time of day.
...
Click to expand...
Click to collapse
I haven't yet managed to find working documentation for WirelessTime. Presumably you need to keep it running and there's no minimise option. I can't work out the configurable time option under the settings that seem to defaulted to 00:10, but it looks like hourly configurable slots on the main screen. I have searched, but can't find a manual, either on PDAInfo, Google, or here. Any pointers in the right direction?
If you are still looking for a tool to manage profiles, here you have
- Profiles for Windows Mobile
I bought it a year before, and they told me I could get 2 more licenses. I have been trying to contact with them this month (in order to get my second license for the diamond), and no way.
So, in the trial version you would be able to configure and programme 2 profiles. Anyway, if you look around the web...
EazyDude said:
I haven't yet managed to find working documentation for WirelessTime. Presumably you need to keep it running and there's no minimise option. I can't work out the configurable time option under the settings that seem to defaulted to 00:10, but it looks like hourly configurable slots on the main screen. I have searched, but can't find a manual, either on PDAInfo, Google, or here. Any pointers in the right direction?
Click to expand...
Click to collapse
I have created a link to it that I put in the startup folder so it runs on every soft reset. I never have to open the program and it doesn't appear as a running program.
I've not found any docs either, but I've left the time option set at 00:10 because I wasn't sure what it did! On the main screen I've just highlighted what I want to be 'on' each hour, and repeated that for all the days in the week. Been working fine for me on this basis
HTH burnso
beemerTPPC said:
I'm the developer of PhoneWeaver (I'll don't put the link to avoid it to be considered SPAM, but it is public that beemer=miguel). I think it is the best profiler program in the market and I can tell you as a secret that as long as I have a Diamond as my personal phone, current version works well on it and next version will be fully optimized
Click to expand...
Click to collapse
Hi
At the Diamond, how you change profiles? where you connect it to?
I am using Phoneweaver I have added a button to the Phoneweaver Menu on my Programs tab and when i press that i get my profile list ... works a treat
SPB Phone Suite is nice - and if you couple it with Second Today then you can access all of the home screen plugin options for switching profiles.
Hi
Before i had a HTC s730 smartphone, i had a program to change profiles according to day and time. i really need it on my diamond are there any one like it?
i have seen huge software packages from fx. spb and others that can also do it among a million other things, but idont want my diamond messed up by crapware.
Regards,
Allan Boegild Peddersen
www.allan-bogild.dk (Danish)
I used Pocket Alarm, which does everything, but its status bar integrates in the Today screen, but not TFLO3. I am therefore also looking for something better or a way to get these kind of programs to appear on the TFLO3
I use phoneweaver from SBSH, have the setting on one of the TFLO program tabs. Works for me.
http://www.sbsh.net/product.php?id=28
Thanks but it is not really what i am looking fore..
I dont want any today plugin or being able to control wifi and stuff
just a simple program to create a shedule when to switch to a profile...
maybe i should look into coding it myself... cant understand it dosent exist?
Regards,
Allan Bøgild Pedersen
www.allan-bogild.dk (Danish)
fredfox_uk said:
I use phoneweaver from SBSH, have the setting on one of the TFLO program tabs. Works for me.
http://www.sbsh.net/product.php?id=28
Click to expand...
Click to collapse
Looks loke it includes many of the PA features, but how do you get it on a TFLO3 tab?
abp said:
Thanks but it is not really what i am looking fore..
I dont want any today plugin or being able to control wifi and stuff
just a simple program to create a shedule when to switch to a profile...
maybe i should look into coding it myself... cant understand it dosent exist?
Regards,
Allan Bøgild Pedersen
www.allan-bogild.dk (Danish)
Click to expand...
Click to collapse
You need to control it so the plug-in is very convineint, just that TFLO is new to the WM world. I guess that's why it doesn't exist. Let's know when you have coded it.
EDIT
Just tried PhoneWeaver (30 days free trial). Suggest you try it as it does what you requested and does not dependend on a plug in (available though, but you need not install it). It does not quite offer as much flexibility as PA and lacks an overview at a glance of all profile settings (at least I did not find such yet), but it is simpler and you do not depend on the plugin to change profile manually, so I'll keep it.
Profile Manager
I needed the same software too just a simple profile manager without all the extra plug ins
www.winmobileapps.com has a software called which I used for my Ipaq 614 and it was fine but was unable to get it to work on the Touch Diamond possibly because of the weird volume controls rather than the standard WM6 ones.
Try it though and maybe you'll have more luck 'cos there's nothing else out there and I searched for weeks.
Hello. Here is what I am looking for and maybe my Fuze can already do this, but I can not figure it out.
I would like to have more control of the phone profile options like I used to have on my Blackberry phones. Basically I want to be able to make custom profiles.
For example. With my old phones I was able to use an "advanced" feature in the phone profile section to create what I called a "night" setting. When this setting was activated the entire phone was on silent (texts, emails, etc, everything was silent) EXCEPT the phone, which would ring if I received a call. So it was basically a "phone only" setting. This was perfect at night because I would only receive a call if it was a real emergency.
Or let's say I want EVERYTHING to vibrate EXCEPT the phone that I want to ring. On my Fuze I see how to put the entire phone on "vibrate" or "silent", or "normal", but how do I adjust those profile settings if I want to or create new profiles
Is there a program/script/plugin that will accomplish this? Or can I already do it on the phone?
Thanks for any help with this.
i am looking for something like this too so if anyone knows of a program that does this or can make one that would be really awesome.
phoneAlarm from pocketmax.net is the program you want.
You can create several different profiles controlling everything from ring and alarm tones to backlight level to WiFi status and automate switching between each of them based on time, appointment, location...
Though written as a Today screen plug-in, there is a TouchFlo support mode that lets you run TF as well.
dgduris said:
phoneAlarm from pocketmax.net is the program you want.
You can create several different profiles controlling everything from ring and alarm tones to backlight level to WiFi status and automate switching between each of them based on time, appointment, location...
Though written as a Today screen plug-in, there is a TouchFlo support mode that lets you run TF as well.
Click to expand...
Click to collapse
dgduris, thank you for the info. I am going to go check it out now to learn more. I am currently using spb Mobile shell. Does it work with this program?
thanks again for the info. I will report back what I find and how it works!
How does phonealarm support TouchFlo? I used to use phonealarm with my 8525. But with my new Fuze, I've been trying out SBSH Phoneweaver. Which seems to be working well enough. It has a pop-up profile screen menu overlay that I set to one of my buttons.
spb phone suite was the answer for me. really a nice program.
does spb phone suite mess with the Touch Flo? and my manila? i dont want to have the entire SPB thing show up in my home screen. I want to it to be like an app where i can just open it and chang I just want to be able to change profie profiles and then close it again.
I believe it will be in your profiles or setting list and it does not mess with TF3D. It works great with my Mobile Shell touch screen settings also.
Hi folks
I'm just curious as to what alarm applications you guys are using. I'm find the built in "Clock & Alarms" to be somewhat limited as it only allows for 3 alarms.
I would like something similar to it, but to be able to easily add new alarms, and maybe even customize the ringtone/vibrations for them individualy, if possible.
Thanks for your interest
lelepu said:
Hi folks
I'm just curious as to what alarm applications you guys are using. I'm find the built in "Clock & Alarms" to be somewhat limited as it only allows for 3 alarms.
I would like something similar to it, but to be able to easily add new alarms, and maybe even customize the ringtone/vibrations for them individualy, if possible.
Thanks for your interest
Click to expand...
Click to collapse
You won't find anything better than G-alarm
http://forum.xda-developers.com/showthread.php?t=422362
I use the alarm functionality in MortPlayer.
It has the advantage of turning the volume up and launching itself (obviously).
This leaves my phone ready to resume playing the podcast or audio book I was listening to the night before with just one button press.
This affords me another 30 seconds in bed ;-)
Lanroth
I've tried them all, and for me, the best is phoneAlarm, PERIOD!!!
SPB Time
While not free, it is a nice option. Very easy to use.
After trying Mobile Shell, I tried just about everything else the SPB house has put out. Some I tried and deleted, like the lame SPB Online, this is one I kept.
i second G-alarm. nice if you are looking for a free program.
pTravelAlarm
I also agree that G-Alarm is one of the best. You can set multiple alarms for reoccurring times and days. Also, you have to make a ball run through a maze before you can hit the "Snooze" button. It kind of forces your mind to wake so you dont just roll over, hit a snooze and fall back asleep
Also, it also automatically turns the volume to max even if its on silent. Handy feature if you do like I do and leave your cell on silent all of the time when working, then forget to turn it back on later
pyraxiate said:
I also agree that G-Alarm is one of the best. You can set multiple alarms for reoccurring times and days. Also, you have to make a ball run through a maze before you can hit the "Snooze" button. It kind of forces your mind to wake so you dont just roll over, hit a snooze and fall back asleep
Also, it also automatically turns the volume to max even if its on silent. Handy feature if you do like I do and leave your cell on silent all of the time when working, then forget to turn it back on later
Click to expand...
Click to collapse
Here's a good one, too.
SPB Time
Like someone said earlier: Since I use Spb Mobile Shell, I found that Spb Time is perfect. It includes an optional today plugin and can be a tab in Mobile Shell. It lets you set one-time alarms, recurring alarms and you can set specific sound files to each one (can also set to vibrate and auto-snooze).
I still use pTravelalarm.
http://www.fizzsoftware.com/products/alarms/alarms.html
very good, and finger-friendly. installed all of the others mentioned above and winded up using this. Still happy.