Slide2Unlock Pro v1.4 during phone calls and backlight issue Please Help??? - Tilt, TyTN II, MDA Vario III General

I am running the Slide2Unlock Pro 1.4 and I am having trouble with this app activating during phone calls and making it difficult to get back to the dialer.
Two questions
1. does anyone know how to stop this from happening?
2. How can I get the phone to maintain the back light etc on during the call so I do not have to hit extra buttons to wake the phone up again.
Thanks again.

1 word. kaisertweak

I had enough trouble with Slide2Unlock that I had to un-install it. The problems that I had were:
1. the latest AT&T ROM did not obey KaiserTweak settings
2. this led to the problems that you are having
3. the program (I have no idea how) was draining the battery way too fast. Removing it has seemed to stop the battery drain.
Bill
download said:
I am running the Slide2Unlock Pro 1.4 and I am having trouble with this app activating during phone calls and making it difficult to get back to the dialer.
Two questions
1. does anyone know how to stop this from happening?
2. How can I get the phone to maintain the back light etc on during the call so I do not have to hit extra buttons to wake the phone up again.
Thanks again.
Click to expand...
Click to collapse

Related

Buggy damned Tilt official 6.1...

I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...
I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.
No issues with the official AT&T ROM either.
wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.
Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.
Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.
I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.
I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!
zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.
Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.
No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.
I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.
NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.
Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?
Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..
SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!
TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.
Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.

Problem with PocketShield

Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...
wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...
rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?
chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..
I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...
i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!
I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.
Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.
Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..
I ran the site and its fine why do you say its a phishing site?

Incoming call screen disappears - can't answer call!

Hi all,
Friend and I both have the Incredible S, loving it! He has a slight issue and I can't for the life of me solve it. Everything was working fine but now when he has an incoming call and the screen is off the incoming call screen flashes up briefly then disappears and device shows normal 'desktop' - you can't answer the call!
If you call his phone and the screen is active, incoming call screen pops up as expected and you can answer call.
Any ideas peeps?
Thanks
Ant
Hmmm,
I'm having the exact same problem. Running Fresh Evo on HTC Evo. Would love to know why this is happening. Any ideas?
Sliphorn said:
Hmmm,
I'm having the exact same problem. Running Fresh Evo on HTC Evo. Would love to know why this is happening. Any ideas?
Click to expand...
Click to collapse
Never worked it out, friend did factory reset in the end to fix it.
Ant
Bummer. Here's some info:
Latest Fresh EVO
Rom Manager
Rom Manager Janitor
Juice Defender Ultimate Juice
Titanium Backup Pro
Cachemate for Root
ShootMe
Adfree Android
adbwireless
Call Control (problem before this, though)
Launcher Pro
Any hints?
Having the same exact issue. This sucks... This started today for me around noon ( no calls before then), and has persisted throughout the day. Yesterday was fine.
I use Google voice for all of my calls.
The only thing I've done today that I haven't done every other day was that I installed the Gtalk app this morning. In the past, I've used Gmail directly. However, my computer was off during at least one of the phone calls I received today, so I can't imagine this could be it...
Perhaps because I installed gAlwaysIdle (an addition to Gtalk that makes you never go idle or always be idle) as well?
Does this correspond with anyone else's experience?
I'll probably just reflash my phone
<Rooted Atrix 4g running GingerBlur>
hmm this sounds like a serious firmware problem tho..
all i could suggest is flash a firmware that the most of the ppl are using, and dont got probs with...
well doing a good reboot seems to help alot these days. So disable the fastboot option en turn it off, wait a while (10 secs should be enough) en start the device again.
Also had some of the trouble like crashing things and this solved it for me. Give it a try and hope it will fix it.
Otherwise there seems to be no other way than a factory reset (go htc!)

HELP. all incoming calls go to speakerphone in CM7

i'm not completely sure, but i remember seeing an option on CM7 somewhere that said incoming calls to speakerphone. i turned it on, then i updated to 7.02, now i can't find that option anywhere, but it's still turned on. and ALL my incoming calls turn the speakerphone on without any way to stop it.
i've spent hours going through all 120 apps in my phone and in every single setting trying to find something to turn it off. I've even used titanium backup to try and wipe the settings and CM settings with no luck.
I don't mind this being a toggle on/off like the carmode app, but i can't have it always on. I have to ignore important calls now just because it takes 10 seconds for the phone to actually let me turn off the speaker.
so please, if anyone can help me here. i'm about ready to wipe the phone but i seriously don't want to waste and entire day doing that so someone please help.
I font remember ever seeing this option in my cyan 7. Interesting.
RogerPodacter said:
I font remember ever seeing this option in my cyan 7. Interesting.
Click to expand...
Click to collapse
Yeah I don't recall that settings.
maybe it wasn't and i'm just crazy, but i'm still having this issue, and i'm about to wipe my phone to fix it, so if anyone knows any other way i'd seriously appreciate it.
Maybe try to wipe Cyanogenmod Settings using Titanium Backup? If all else fails...instead of doing a full wipe...try the /system only wipe that tamasek has in the nightly forum somewhere...that way...your data and apps are still in tact...and can just flash a new nightly...then if it still doesn't work...I guess you already know what to do.
I can't believe it but this actually happened to me today. I hung up and had the caller call back and it went back to normal.
Did you ever get it fixed? I put the newest stable version on my EVO and I have the same issue all outgoing calls go right to speakerphone and all incoming go right to speakerphone..
Also I notice carmode starts up on it's own as well.. but turning it off incoming/outgoing calls will still right to the speakerphone

Issues With Cm-11-20140606-Nightly

hi guys,
I'm working on CM-11-20140606-NIGHTLY.
currently I'm facing two problems:
1- when i plug my headset, if anyone calls ringing be in the headset it self, so if i'm not beside my note i'll never hear it.
i didn't face this issue in stock rom as ringing works with both mobile itself and headset at the same time.
so, is there any way i can follow to make it act as stock rom??
2- some times when i press home button to use it, soft buttons lightened but screen still black and no way to make mobile works again unless i restart it.
3- on stock rom i used to install xposed installer and apply "enable call recording" and was working flawlessly by replacing add button by record, now it doesn't work and need it sometimes.
any suggestions?
NaAZoOR said:
hi guys,
I'm working on CM-11-20140606-NIGHTLY.
currently I'm facing two problems:
1- when i plug my headset, if anyone calls ringing be in the headset it self, so if i'm not beside my note i'll never hear it.
i didn't face this issue in stock rom as ringing works with both mobile itself and headset at the same time.
so, is there any way i can follow to make it act as stock rom??
2- some times when i press home button to use it, soft buttons lightened but screen still black and no way to make mobile works again unless i restart it.
3- on stock rom i used to install xposed installer and apply "enable call recording" and was working flawlessly by replacing add button by record, now it doesn't work and need it sometimes.
any suggestions?
Click to expand...
Click to collapse
Hey there! Let's see:
1. I really have no idea what could be happening...try asking on the CM11-Nightlies Discussion forum or the devs at the Development thread.
2. Are you sure the screen STAYS black?? On my phone, I get the black screen with softkeys lighting up, but display turns on after a good 10 second lag...
3. What exactly is the problem here? Is the record button not displaying? Does the module support KitKat?
Try disabling the module>reboot>re-enable>reboot. If that doesn't help, uninstall and re-install the entire Xposed Framework.
Xposed-related problems don't usually get support but you can ask at the discussion thread linked above.
The Dork Knight Rises said:
Hey there! Let's see:
1. I really have no idea what could be happening...try asking on the CM11-Nightlies Discussion forum or the devs at the Development thread.
2. Are you sure the screen STAYS black?? On my phone, I get the black screen with softkeys lighting up, but display turns on after a good 10 second lag...
3. What exactly is the problem here? Is the record button not displaying? Does the module support KitKat?
Try disabling the module>reboot>re-enable>reboot. If that doesn't help, uninstall and re-install the entire Xposed Framework.
Xposed-related problems don't usually get support but you can ask at the discussion thread linked above.
Click to expand...
Click to collapse
1- I'll check above links, thanks.
2- may be i didn't wait for a whole 10 seconds, usually i restart it after a press or two.
will wait and check.
3- probably module isn't compatible as it was updated 25-7-2013.
I've tried uninstall and reinstall both module and Xposed framework.
many thanks for your interest.
NaAZoOR said:
1- I'll check above links, thanks.
2- may be i didn't wait for a whole 10 seconds, usually i restart it after a press or two.
will wait and check.
3- probably module isn't compatible as it was updated 25-7-2013.
I've tried uninstall and reinstall both module and Xposed framework.
many thanks for your interest.
Click to expand...
Click to collapse
You're welcome(though you COULD just hit the Thanks button next time, yknow )
And yeah, try waiting for a few seconds for the black screen problem...I'm pretty sure we're having the same problem...

Categories

Resources