Hs anyone here successfully synced their WM6 himalaya with Windows Vista over bluetooth?
I am trying to sync my device with Windows Mobile Device Center 6.1 in Vista over bluetooth but whenever i try to click on "Connect Via Bluetooth" in ActiveSync found in my device i get following error on my device:
"Cannot communicate with the PC because of the following Remote Networking error (Error 608)
Please reconnect your device if problem persists, restart the device."
I have tried both the roms i.e. helmi_c & c_shehkar's rom but couldnt get to sync my device over bluetooth with Vista. Previously i had a WM5 rom on my device and it synced with Vista flawlessly over bluetooth.
Can anyone help me on this matter???
In the file After_You_Flash.txt you can read:
"Once the device comes to life after hard reset for the first time, goto Settings-->Connections-->USB to PC and check the advance network functionality.
If you dont do this the device shall refuse get conncted to PC via USB."
EelcoV said:
In the file After_You_Flash.txt you can read:
"Once the device comes to life after hard reset for the first time, goto Settings-->Connections-->USB to PC and check the advance network functionality.
If you dont do this the device shall refuse get conncted to PC via USB."
Click to expand...
Click to collapse
i did what was written in that file but the problem is im syncing it thru bluetooth not USB so tht didnt solve my problem.
can you syncing WM6 via BT with WINXP?
It's not working with me too on XP
Well, it was never working for me - on any OS - WindowsMobile wasn't detecting ActiveSync service on my PC via BT
utak3r said:
it was never working for me - on any OS - WindowsMobile wasn't detecting ActiveSync service on my PC via BT
Click to expand...
Click to collapse
Himalaya WM 5.0 was syncing just fine via BT ActiveSync.
WM 6.0 is not (yet).
Sascha
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
taim99 said:
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
Click to expand...
Click to collapse
Oh man... my advice is.... get Vista away from your PC
Seriously, I can't help, there're so many problems with so many apps on Vista...
utak3r said:
Oh man... my advice is.... get Vista away from your PC
Seriously, I can't help, there're so many problems with so many apps on Vista...
Click to expand...
Click to collapse
utak3r the problem is that i cant do that since i am a WPF developer and need Vista for it. I kno WPF applications are possible on XP too but we as developers look forward to next-gen technologies.
All i wish is that our masters here somehow get this thing to work over bluetooth.. I wish them best of luck!!
hi
which bluetooth software you using ?
taim99 said:
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
Click to expand...
Click to collapse
There Might be a solution..Only if u have XP installed on 1 of the partition..u can search the drivers in that partition
i can sync just fine with bt over vista using wm6...just had to make a new outgoing serial port on the ppc.
Using microsoft stack on both devices.
Syncing BT with Vista and WMDC
Have a look at this link. Its for WM5 but I used it with WM6 successfully.
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth
Good luck
conecting ppc (wm6) to vista via BT solution
A few months ago, I posted on some forums this solution of my own, that enables conection vista pc and wm6 ppc via BT:
OW TO CONNECT WMDC AND PPC ON VISTA
1.-run bt on your pc
2.-run bt on your ppc
3.-bond your pc and ppc via bt, that will require password on both devices
4.-once connected, your pc will show some services your ppc is offering: activesync, voice gateway, obex, etc. and will allow you to configure some of them. you can see that because under each configurable service there is a button named configure. your pc assings by default one specific com port to activesync service, that may vary depending on free com ports available on your pc. you can see the assigned port clicking on configuration button. on the new window, you can see COM PORT, and one number. For our purposes, let´s suppose it is COM5
5.-run wmdc software, modify connections and mark on "allow bluetooth connection", which is not marked by default. close wmdc.
6.-old activesync program allows to choice com port to connect to. wmdc does not. it must be set modifing windows vista registry. so, run regedit and look for the key HKLM\software\microsoft\windows ce services\serial port. this key has usually the value "bluetooth" (without quotes). well, modify it, delete bluetooth and write COM5. (or any other com port your pc has assigned to activesync). notice that we are modifing SERIAL PORT, that means wmdc uses this service to connect.
7.-close regedit and reboot pc in order to allow changes in the registry.
8.-run again bt on both devices.
9.- run "add new bluetooth devices" on your pc. it will show again your ppc and services it provides, including activesync. configure again activesync service, and check out com port is still the same as before. in this configuration window, you will notice you can modify the NAME of the service, that is "activesync" (without quotes). well, change it, and write Serial Port.
10.-run again wmdc and it will connect to your ppc
what have we done?
1.-activesync ppc service is connected to pc using COM5
2.-wmdc is using serial port on COM5
3.-we change the name of activesync ppc service to serial port service
4.-both running on com5.
I just recently put dutty's touchflo and radio 1.27.11.17 on my tilt. I'm having trouble connecting to my computer with activesync via usb. Does anyone have any suggestions?
Hi, I have HTC MTeoR in my hands and I would like to connect my notebook to internet via this device with GPRS. Internet Sharing application is missing in WM5 ROM, so how could I connect through cable?
I have WinXP Prof and ActiveSync 4.5. Anyone can help me with virtual modem setup? Thanks anyway.
i have a problem with activesync 4.5 cannot sync with my pda2k
showed " ActiveSync cannot connect to the Windows Mobile powered"
But when i use wm2003 Thatworked but on other windows mobile the same problem in wm5,wm6.1,wm6.5 and now i use wm6.5
thanks
sorry for my english
I have two laptops. I can sync with the Windows XP laptop with no problem, however, I can't sync with the Vista computer at all. I've even tried reformatting the Vista laptop, but can't get it to sync. I've tried uninstalling the driver for the connection through the Device Manager as well as the Windows Mobile Device Center. Then reinstalling Windows Mobile Device Center and the driver. I've checked the cable and USB port. They work for everything else I can throw at them, but can't get them to sync. Windows Mobile Device Center does not show any devices connected. Any advice?
Laptop 1
Windows XP SP3
Activesync version 4.5
Microsoft Outlook 2007
Laptop 2
Windows Vista Home Premium SP1
Windows Mobile Device Center
Outlook 2007
Cell phone
AT&T Tilt
Windows Mobile version 6.1