Internet on PC via MTeoR (WM5) - HTC Breeze

Hi, I have HTC MTeoR in my hands and I would like to connect my notebook to internet via this device with GPRS. Internet Sharing application is missing in WM5 ROM, so how could I connect through cable?
I have WinXP Prof and ActiveSync 4.5. Anyone can help me with virtual modem setup? Thanks anyway.

Related

Activesync pass-thru for laptop...

Hi All,
I've set up my home bluetooth network and use internet connecion sharing between my laptop and PC. But I can't make it work at work because of obscure network architectures.
I thought I might be able to get round it by finding an activesync client for my laptop, and convincing my work PC to connect to it via activesync server.
That way I could tunnel my laptop's internet connection through activesync on the PC, just like my XDA II does.
Anybody have any idea how I might make this happen?
Thanks All,
Phil

newbie wants learn about WLAN FOR PDA2K with Laptop

First of all if some one can help by explaining “that how to connect PDA2k with Laptop by WLAN”
I want that my PDA2k can connect to laptop than I can brows internet by WLAN through laptop that is connected to internet via LAN.
It can be possible or not?
thanks in advance....
Yes it is possible.
Just how you do it depends on the the OS on the Laptop.
In general you will need two NIC (Network Interface Cards) one will need to support 802.11b and one will need to be your wired LAN.
The wire LAN should not use addresses in the range of 192.168.0.xxx
You'll need to run ICS (Internet Connection Sharing) on the laptop, or a program like it. See; http://www.practicallynetworked.com/sharing/ics/ics.htm
The wireless card will need to be configured as an Ad-Hoc network. The Laptop will need to be on and connected to the internet to browse it on the Blue Angel. The PDA will need to be configured as per this page; http://theillustratednetwork.mvps.org/WM2003/Connection_Manager/ConnectionManager.html
qureshi said:
First of all if some one can help by explaining “that how to connect PDA2k with Laptop by WLAN”
I want that my PDA2k can connect to laptop than I can brows internet by WLAN through laptop that is connected to internet via LAN.
It can be possible or not?
thanks in advance....
Click to expand...
Click to collapse
1.you need a wireless access point to connect your pda2k to wlan.
2.you don't need laptop to be using wifi, laptop should be connected to the same network though (thru wired lan also it works fine)
3.if u want to sync pda2k with yr laptop, enter the WINS server address as your laptop's ip address in yr pda2k.
4. if u can connect to wifi access point, u don't need to go thru yr laptop to connect to internet, if yr network is connected to internet (directly or thru proxy), just check the proxy settings (if any) on pda2k

How to setup Wireless Modem?

I have just got my Vario III but am having problems setting it up to be used as a wireless (bluetooth) modem for my laptop computer. I am running Vista Ultimate and have not installed any driver software for the phone.
Can anyone please assist?
Wireless modem using Vista and TyTN II
First you should create a partnership between Vista and TYTN II. Then you run the Internet Sharing using Bluetooth and choose the "Connect To" menu at start menu and select connect to a Bluetooth PAN. You should see your mobile phone in the list. Just click connect. Boom !!! You're connected !
BT PAN
I can get Bluetooth Internet sharing to work on my AT&T device it is just a bit clumsier than by USB. With USB I just launch the Internet Sharing app on the Tilt and select PC Connection via USB. I then get an immediate 3G data connection on my laptop. Cool. As others have stated to tethering or extra data plans required.
To get this to work via Bluetooth I must do the above but select BT AND then connect the Network Access Point connection in my BT connections from the PC side. Isn't there some way to get this down to a single connection initiated solely from the Tilt side?
BTW: AT&T Tilt device and ROM, Toshiba BT stack, Windows XP SP2.

Bluetooth Internet Connection

Anyone can help me to use bluetooth and internet with my desktop pc?
TYVM
Are you talking about using your TyTN II as a modem to connect to the internet through your PC?
If so, is your PC running XP or Vista? And is it wirelessly enabled or do you need a bluetooth dongle for your PC to recognise othe bluetooth devices?
Nopes, i mean in the past in my old palm tx with a bluetooth adaptor plug to my pc i use internet with a pan connection i think, that can be done with the tytn II?
To use device to connect : Just turn on Internet Connection SHaring on your device (selecting BT) and then connect to it as a BTPAN on pc
To use pc to shre web with device, just connect activesync over BT and the device can then use the pc's web connection.
Hi, where can i find "internet conection sharing"
using wm6
its internet sharing and you can find it on programs menu

Problem with Remote Desktop w/ WM6.5 hybrids

So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.

Categories

Resources