Related
This is a very sad thing!
I have my Tilt (thankfully got the defective one replaced!) and I set it up to sync with my exchange 2007 server which should be push e-mail. In fact I know it is....
On the AT&T stock rom, it stays connected 24/7, never goes offline which is what it's supposed to do.
I get home, flash on the HTC ROM. Set up the partnership with my server, and I look, an hour later it's offline, showing last synchronized 45 minutes ago. I hit sync, it syncs, stays online for maybe ten minutes, then the same thing.
I've tried every cooked ROM too, same deal.
When I do manually sync, it doesnt try to connect to the network, it's already connected. I was wondering if the network settings may need to be tweaked...?
I've already tried adding an exclusive in task manager for activesync.
I'm using a Tilt and on AT&T.
I'm really going to be upset if Im locked to the AT&T rom just because the other ROMS dont handle active sync properly...and I can't beleive that the stock HTC rom has a problem like this...so I'm wondering if the network wizard may not be entering all of the proper settings...
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!
I'm wondering if it's you. it works fine for thousands of other people, and for you, 2 phones it's been "broke"
I had my phone disconnectng from active sync. It didnt bother me in the least because I'm not updating my phone but maybe once a day, i really dont care if it disconnects every 15 minutes. After I found out it was my USB hub, it's worked perfectly ever since. And I never once blamed the phone.
Hey now...no need for any snippy tones there...
I was asking for help here, not looking to be blamed as the source....
Exchange 2007 is supposed to remain totally connected 24/7....and it isnt. And Ive been able to recreate the problem on two separate devices....
So just looking to see if anyone else had had the same.....
lostinvt said:
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!
Click to expand...
Click to collapse
You must admit - this statement boggles the mind. You expect AT&T to replace a device because it only works right on their network with the software they shipped on it? Umm, that's their whole EXCUSE for shipping custom ROMs and you're busily proving them right....
It's obviously too late to ask you not to return a hacked device as "defective" and f$ck it all up for the rest of us, but please don't do it again!!!!!!!!!!!!
Your actual question would probably better be phrased as "Anyone on AT&T managing to keep ActiveSync continuously connected to Exchange 2007 with non-AT&T ROM?"
Not at all...I actually had a boat of other problems with my first Tilt..I did not in any way return it because of this problem...
Im not daft...I would never go back to AT&T and ask them to replace something because I monkeyed with it and broke it...
My scroll wheel stopped working along with my GPS....which is why I returned it...after restoring the AT&T ROM back onto it.
So...I will just drop this since it seems as if nobody actually can listen to my problem and offer up solutions,but would rather take potshots at their impressions of my behavior.
lostinvt said:
would rather take potshots at their impressions of my behavior.
Click to expand...
Click to collapse
No offense, but if you write more clearly you will be misunderstood less.
the first was defective, it it exhibited the exact same behavior doesn't read many other ways than "I returned the last one for this problem".
i gave you a suggestion to start looking at. AT&T and us posters arent out to get you. trust me.
this may sound kind of obvious, but did you check your sync schedule in ActiveSync? Make sure it is set to as items arrive.
I have my activesync working fine with Exchange 2003 on AT&T's network.
Only other thing I can think is if you have KaiserTweak set to disconnnect GPRS automatically after X amount of time.
I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.
me + kaiser + htc rom + exchange 2007 + at&t network = working just fine
eric b
Psy....
THANK YOU!
At least Im not nutso...
I am using the clear AT&T ROM which actually runs very well...its just the customizer in me that needs to make things better even if they arent broken!
Everybody else...sorry if we got off on the wrong foot with this thread...
Start fresh?
I wanted to throw an update out there....
My desire to figure this out got the best of me, so Ive been pretty much just flashing and experimenting for the last few days, and I think I may have actually figured this out....
It looks like it IS something to do with the network wizard. I pulled out a cingular settings cab from my hermes days. Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
Nice work! What I've done to track this kind of thing is to use DotFred's TaskManager and export the *entire* registry before and after, then use a "diff" type utility to compare the two. Some obvious timestamps, etc, always change but it's usually pretty apparent where the change(s) were.
Might be interesting to do that between your working config and the wizard's config and see if there's just one or two settings different....
Richard
lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
I wonder what all there is in the cab file? I haven't tested it on my Tilt but on the 8525 if I canceled the customization and inputed the network settings myself it didn't stay connected.
Where do I get a copy of this cab file so I can look at it?
I'm attaching the cab for the settings....been working like a champ for over a day now, so Im going to call this issue resolved in my book....
rsoloman,
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Sounds like a scooby doo mystery to me!
lostinvt said:
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Click to expand...
Click to collapse
Well, personally I'm happy on the AT&T ROM, so it will take someone else running the .reg file extractions. I'll be happy to help analyze the two, but right now it won't be me extracting them
Richard
For the record I'm using a tilt flashed to HTC ROM on at&t without any AS problems running Exchange Push.
I always manually input the at&t settings though.
Mine actually worked fine both the stock AT&T rom and the HTC rom. I just started having this problem with duty's touchflo tilt rom. The cab posted here did not make any change for me. Any other suggestions?
ActiveSync BOOSTER
Is there a way to boost up speed of Sync
Is there a any software or Cab file for it ?
Also want to know after we sync Phone
It keeps repeating to sync, is there a way to stop it ?
With removing the phone
Please Help
So has anyone been able to fix this problem of not being able to use Good on the Tilt?
I've heard a patch may be coming from HTC but nothing confirmed.
Just wondering if anyone else has had any luck with this.
Thanks
You might do a search over on the Wizard WM6 forum. There was discussion about Goodlink and people trying to get it to work on WM6 there. I seem to recall there may have been a workaround but not sure.
I use goodlink on my Tilt and it works fine. Is there anything specific you are having trouble with? Such as installation or the running of the application... maybe I could help.
Good is great on Tilt
I'm using Good on my Tilt as well. I've actually had less problems on this device using Good than on my previous 2.
Just because the Good icon isn't in your program folder like it was on the 8525, don't be alarmed. You don't need the 'Get Good' icon to actually get Good. What I suggest you do is hard reset and then go to get.good.com with your browser. I find that when Good is the first piece of software installed, it works best because it really takes over a lot of the phone so that's why if you've loaded up a bunch of apps, it might be wise to start completely over with a fresh install.
Download the little installer app from that site and then run it, put in your email address and a your code, which is sent by your IT dept and then let the install run uninterrupted for about 20-30 min. You should have NO problems with it.
FWIW, when I called my IT dept to let them know I bought a new device and needed to get a new code from the good server he said to me 'you know Good won't work on a Mobile 6 device, don't you?' He was wrong, I knew he was wrong, and then I just told him it was Mobile 5 so he'd just send it.
Allright I'll give it a shot.
I already downloaded the Good cab as it didn't give me an incompatable message. Problem now is when I try to install it, the server is down so I'll try again in a bit.
Thanks
i installed goodlink on my kaiser and it's working fine too.
good luck.
Thanks.
Still getting the server error but I'll keep trying
Well I'm still getting the server error so I guess its not going to work for me this way. I'm thinking about trying the hard reset and going for it again...
Don't really seem to have any other options...
We all know there are various Carrier versions of the 'Kaiser' out in the field and all seem to have different problems (mainly caused by carrier applied cabs!). It appears the US 'Tilt' guys got the short end of the stick...
But before you throw your phone in the bin, check out the Mindsoft site and download their trial...Just see what rubbish you have left in your 'Kaiser' from all those tested cabs and carrier bloatware.
Remember, even our PC's need a clean up at times!!
OH, and before anyone jumps in, This has nothing to do with the so called display driver ommission so don't even bother to get on your soapbox here....
BTW, install the VGA version from the zip file.
I use Memmaid. I been using Memmaid since the 8125 days. Works great/
Good on ya!!!
My kinda person....
The first thing I did after getting my Tilt was install the HTC ROM on it. I didn't even bother trying out the Tiger Woods demo. I tried the pool game and couldn't use the controls. Isn't there a way to prevent the crap from installing the first time you boot it?
US "Tilt" Guy
Farsquidge said:
We all know there are various Carrier versions of the 'Kaiser' out in the field and all seem to have different problems (mainly caused by carrier applied cabs!). It appears the US 'Tilt' guys got the short end of the stick...
But before you throw your phone in the bin, check out the Mindsoft site and download their trial...Just see what rubbish you have left in your 'Kaiser' from all those tested cabs and carrier bloatware.
Remember, even our PC's need a clean up at times!!
OH, and before anyone jumps in, This has nothing to do with the so called display driver ommission so don't even bother to get on your soapbox here....
BTW, install the VGA version from the zip file.
Click to expand...
Click to collapse
So as a "Tilt" guy I find your posts very annoying. I don't want to start one of your little wars that you seem to want to start on every thread you are in. Maybe instead of directing a thread toward Tilt users you should direct it towards people that don't bother doing anything themselves. Or people that deem themselves not worthy to think. Personally I have installed just about every ROM out and tried them each with the software I prefer to run. And yes MemMaid happens to be one of those programs. So instead of insulting people because their Tytn2 happens to say ATT on it and it doesnt have a camera on the front of it maybe you should direct all of the negative things you have to say into a more positive outlet. And just so you don't feel inclined to respond to this thread I will not be reading this thread again. Thank you for your time.
Farsquidge said:
We all know there are various Carrier versions of the 'Kaiser' out in the field and all seem to have different problems (mainly caused by carrier applied cabs!). It appears the US 'Tilt' guys got the short end of the stick...
But before you throw your phone in the bin, check out the Mindsoft site and download their trial...Just see what rubbish you have left in your 'Kaiser' from all those tested cabs and carrier bloatware.
Remember, even our PC's need a clean up at times!!
OH, and before anyone jumps in, This has nothing to do with the so called display driver ommission so don't even bother to get on your soapbox here....
BTW, install the VGA version from the zip file.
Click to expand...
Click to collapse
Why do you say install the VGA version? Shouldn't we install the QVGA version?
Wilhelm said:
The first thing I did after getting my Tilt was install the HTC ROM on it. I didn't even bother trying out the Tiger Woods demo. I tried the pool game and couldn't use the controls. Isn't there a way to prevent the crap from installing the first time you boot it?
Click to expand...
Click to collapse
My Kaiser arrives today (that's why I'm up early ) so I haven't had time to check it out yet, but I expect it works in a similar way to the Hermes.
With the Hermes, most (or all) carrier specific apps were loaded from extended ROM. This can be edited (if the ext rom is unlocked and unhidden) which allows you to select which bloatware is loaded. You need to edit the config.ini file to say what is and isn't loaded - it's quite straightforward, but sorry I can't find the posts which give examples.
You'll need to check this out on your own for now 'cos I don't have my Kaiser to check if this is the same - unless someone more experienced can say whether this is the same or different for Kaiser/Hermes.
Yesterday I flashed my Tilt and installed the RUU_Kaiser_HTC_WWE_3.03.405.0 ROM. Everything was working just fine. My fiancee liked the new layout and functionality, so I flashed her phone tonight, with the same ROM and everything.
However, from the moment she called my phone from hers to test the new ROM, neither of our phones has played any sound whatsoever. No ringtones, no media files, we can't even here or talk to other people when we make calls. I've also noticed that for whatever reason, inside the alarms menu when I try to set an alarm sound, the drop down menu forces the selection to "Default". Even if I try scroling with the keypad or the wheel, the selection shifts up or down one, then immediately returns to "Default". I'm guessing these two problems are somehow connected, but for the life of me, I can't figure out what the problem is or why it would suddenly afflict both phones, even though I hadn't done anything to mine except answer her call.
I've tried resetting the phone and going through all sorts of options, but nothing seems to make a difference. I can still send and recieve text messages, and the vibrate works just fine. I can even connect to calls, but I can't hear the other person and they can't hear me.
I've looked around online and in this forum, and I only found one instance of someone else complaining about this problem (on a blog with a top 10 list of fixes for Tilt problems), but his plea went unanswered there.
As it is, I couldn't call 911 if I needed to right now, so this is a pretty big problem.
Any ideas? Do I just need to re-flash both phones?
gibberjabber said:
Yesterday I flashed my Tilt and installed the RUU_Kaiser_HTC_WWE_3.03.405.0 ROM. Everything was working just fine. My fiancee liked the new layout and functionality, so I flashed her phone tonight, with the same ROM and everything.
However, from the moment she called my phone from hers to test the new ROM, neither of our phones has played any sound whatsoever. No ringtones, no media files, we can't even here or talk to other people when we make calls. I've also noticed that for whatever reason, inside the alarms menu when I try to set an alarm sound, the drop down menu forces the selection to "Default". Even if I try scroling with the keypad or the wheel, the selection shifts up or down one, then immediately returns to "Default". I'm guessing these two problems are somehow connected, but for the life of me, I can't figure out what the problem is or why it would suddenly afflict both phones, even though I hadn't done anything to mine except answer her call.
I've tried resetting the phone and going through all sorts of options, but nothing seems to make a difference. I can still send and recieve text messages, and the vibrate works just fine. I can even connect to calls, but I can't hear the other person and they can't hear me.
I've looked around online and in this forum, and I only found one instance of someone else complaining about this problem (on a blog with a top 10 list of fixes for Tilt problems), but his plea went unanswered there.
As it is, I couldn't call 911 if I needed to right now, so this is a pretty big problem.
Any ideas? Do I just need to re-flash both phones?
Click to expand...
Click to collapse
ouch... this is a pretty easy one and has been answered MANY times... check the thread called "no sound or camera problems... change your radio" so yeah... change your radio.
Thanks for pointing me in the right direction, but I've searched the exact string you posted, I've tried "No sound" (with and without quotes, and several other combination, and I can't find the thread you're talking about. I'm sorry if this question pops up a lot, I really did spend an hour and a half trying to find the answer before asking. Can you please provide a link or show me why my searches aren't finding the right results?
For what it's worth, I think the poster above was directing me to this thread:
http://forum.xda-developers.com/showthread.php?t=393182
but I'm not %100 sure.
gibberjabber said:
For what it's worth, I think the poster above was directing me to this thread:
http://forum.xda-developers.com/showthread.php?t=393182
but I'm not %100 sure.
Click to expand...
Click to collapse
oops... they must have changed the title... it used to be "sound and camera issues: Change your radio" admittadly this new title is more confusing let me know if changing you radio to the recommended one fixes your problem(ignore spelling errors, too tired to care)
Wow.. I've been at this for a while now. I'm starting to understand the whole Radio thing, but I'm having the damnedest time figuring out which radio I should be installing. I've found pages and pages of numbers and names, but what I haven't seen is recommendations or hints towards the HTC 3.03.405.0 ROM's compatibility with the various radios. I've tried changing the radio once so far, but it didn't change any of the issues I"m having.. I'll keep trying (So not looking forward to work tomorrow)
gibberjabber said:
Wow.. I've been at this for a while now. I'm starting to understand the whole Radio thing, but I'm having the damnedest time figuring out which radio I should be installing. I've found pages and pages of numbers and names, but what I haven't seen is recommendations or hints towards the HTC 3.03.405.0 ROM's compatibility with the various radios. I've tried changing the radio once so far, but it didn't change any of the issues I"m having.. I'll keep trying (So not looking forward to work tomorrow)
Click to expand...
Click to collapse
listen, you dont have to try every radio individually.... I dont know if your rom is 6.0 or 6.1 but that should start to narrow it down... but worse comes to worse you only have to try 4 different radios... the first 3 numbers are the important ones... after that try the others starting with those numbers to find the best reception/gps fix etc... so try one of each of the
1.27 (if you have 6.0)
or
1.58
1.64
1.65 (if you have 6.1) (which is more likely if this is a new rom)
whatever you do do NOT flash to 1.65.17.10
try those 4 starting with 1.65
Thanks so much for your help and patience with me.
Ok.. this is slowly coming together in my head.
I'm flashing 1.64.08.21 right now, and I'm running WM6.1 on an AT&T Tilt.
And... grr.. still no luck.
Guess I'll have to go without my phone for tomorrow, cause if I don't get some sleep now, I'll probably kill a customer at work.
gibberjabber said:
Thanks so much for your help and patience with me.
Ok.. this is slowly coming together in my head.
I'm flashing 1.64.08.21 right now, and I'm running WM6.1 on an AT&T Tilt.
And... grr.. still no luck.
Click to expand...
Click to collapse
try 1.65.20.29... I bet that'll get everything running
hi i believe this is the rom u updated to:
http://forum.xda-developers.com/showthread.php?t=365047
you may find somthing on there to help. it says on there that the radio to use is 1.64.06.04 but if you alredi tried a 1.64 radio and it didnt work try the 1.65 as sugested. If you still have no luck then try a different rom that should fix the no sound issue straight away.
try duttys diamond rom with the 1.65.16.25 radio
http://forum.xda-developers.com/showthread.php?t=398271
download links are on the page. let us know how it goes.
I tried your suggestions, and althoughth 1.65 radio didn't work, I flashed Dutty's rom and everything is smooth sailing. Thanks SOOOOO much for working with me to figure this out, this really is a fantastic community!
Glad everything worked out for you my friend, everyone here is very helpful if you have any more problems just shout and someone will answer.
I just noticed that on the Verizon b2b site it says the Imagio comes with Worldcard mobile at the bottom. Does anyone have this on there Imagio? Is there an OEM available?
http://b2b.vzw.com/productsservices/devices/htcimagio.html
I sure didn't get it on mine. This is one program I was looking forward to using.
Nope, it isn't on mine either. I do recall that being one of the listed features. It seems that Verizon has done it to me again. It seems that I may be sending mine back.
Funny, this reminds me of a class action suit against Verizon and Motorola over some disabled Bluetooth features in the V710. What do you think, do we have something here maybe?
Well I like my Imagio, but if we could get them to send us a serial number to work with the demo found on Worldcards site I would be perfectly happy.
I don't remember where I found it, but its from when I would run custom ROMs on my Touch Pro but this works for me.
Its unfortunately not working for me.. I tried installing to device and storage card.
I have tried every version I can find. I seem to remember there being some issue with the TP1 and certain camera mode mods that caused WordCard to act the same way it does on my Imagio. Oh well. I guess there is always DYMO CardScan - you can find it on Marketplace and read about it here - http://wmpoweruser.com/?p=9425
If anyone gets it, post back and let us know how well it works.