Related
Hello all,
I am a total novice at this stuff but request a little help. If you have 2 minutes spare please humour me and help out :wink:
I decided to upgrade my ROm etc for the first time and went to the o2 XDA site to do it.
It seemed to go fine. Then I restored my full backup from the xbackup thing, from my SD card. Is this correct? Or have I just undone my ROM upgrade? All my programs are back on but it looks the same.
If I cant restore after an upgrade, how do i get all my photos and other things back on? I can reinstall programs no prob, and contacts and calender will sync from my PC, but what about everything else?
Sorry if this question has already been asked but I tried the search facility and got nowhere.
Thanks in advance
HPJ
PS you never know, one day I might add something to this forum rather than just asking dumbass questions...
Well I got bored waiting so I bit the bullet and did the upgrade with no restore afterwards.
Seems all fine. Gotta reinstall everything I think so i'm slowly working my way through that. I'll keep posting....if anyones reading?! :!: :?:
HPJ
Glad you solved your problem. The reason that you never got an answer is that the topic of should I restore a backup after a new rom flash has been covered so many times before.
I will add a line in wiki BlueAngel For Beginners
Yeah I thought that, but the search facility seems to give so many inaccurate results that it just takes too long to go through all of them.
I'm just not technically minded, as I'm sure many others on here aren't, so more often than not we are stumped by the simplest of things.
Oh well...still far better off with the xda2s than anything else!
I understand your point on the search, it takes time to work it out and some things you just can't search for as they seem to be blocked.
The problem that we have is trying to work out the post that are based on the fact the the user has tried to find a solution and the ones that just have not.
Take the upgrade issue, we have wiki and it points you to a thread that reads Wiki, help me and yes I have read getting started. So Why do we have new threads that read upgrade failed?
On good days some of us point new users in the right direction and on bad days some of us don't. Would be nice if it was not allways the same ones.
That's the problem I had also. I'll search for stuff, but when I get results, a lot of them conflict. Not only that, but in the wiki there are things that branch off onto multiple levels. If someone ran a graphical link checker, I'm sure one would find a spider web.
I've found that I got more precise answers by posting and getting a response than going to the wiki. Although, I actually learned more by reading through the wiki....after I did what I needed to do first.
I use Linux and in the config file for Postfix, there are a million things that you can change. Looking through it I thought I had to change everything. Turns out, after I asked, I only had to make 2 changes to get it working.
I'm sure the mods and the expert posters do the best they can, but I'm thinking some spring cleaning needs to happen....from a newbie's point of view.
Tom
Tom
On the wiki side its an open site, so if you have a login you can change what it says, correct it or even add to it. Thats the whole Idea of it.
I know that its not perfect well I should anyway. However its better than nothing, it can be fixed by us all and not just a chossen few. Please remember that these people don't have the newbie frame of mind so they write what makes sence for them, leaving out information that should be understood by the reader if he is in that section. (Like the kitchen)-
So if you feel that it needs cleaning up then please do it, you have the rights, you have gained the knowlege so its all up to you or others.
Well here's a little update as to my experience upgrading the ROM and all the other bits.
It sucks! My xda2s was damn perfect before I upgraded. Since upgrading I have had to soft reset about 5 times a day, just because it decides to freeze on me.
Then, when you take it out of its cradle, it freezes...EVERY TIME!!! So whenever it comes out its cradle i have to soft reset!!!
Shurely shome mishtake??!??!!
And surely it's been fixed with something by someone on here that has 'the knowledge' (for I definitely do not, in case you hadn't noticed!).
And the benefits?? Er.......well the phone screen looks a little different...ummm.....that's it. I think. Oh yes, did I mention it freezes whenever it bloody well feels like it??!?!
Here's what the figures are now....for those of you that know what they mean...
ROM version: 1.31.00 WWE
ROM date: 12/13/04
Radio version: 1.06.00
Protocol version: 1337.38
ExtROM version: 1.31.139 WWE
Annoyance setting: Maximum
Timescale to be thrown through the nearest window: Imminent
HPJ
Have you got the O2 'today' screen still running (with O2 button top of screen)? If so that's the biggest offender of lockups in my opinion!
I followed instructions here:
http://forum.xda-developers.com/viewtopic.php?t=18350&highlight=
and since then its only locked once in about about a month...before that soft resent 3 to 4 times per day!
sounds good I'll give it a go now.....will post my results soon!!
My word I think it's worked!
See I knew it would be something simple....just took someone 2 minutes to point me in the right direction :roll:
Cheers vince
I'll crawl back into my newbie hole now until the next problem.....!!!
HPJ
i was in the same situation...only having had my XDA IIs for a month or so...was extremely hacked off that it was so unreliable! BTW did you have the connections.exe or connections.lnk? There seems to be some variation between machines...though moving out either one seems to stop the dreaded O2 software loading up!
by the way, are you using wifi connections? My XDA IIs (and others from searching on the net) seem to have a lot of problems connecting (it says 'connected' in wifi but when you try and go to a website it says "page is not available")....however I found something that said try re-entering WEP keys for known connections....and from my experience this seems to work for me. My Dell Axim organiser never had this problem...so possibly another 'feature' of the XDA IIs !!!
vincexda said:
(it says 'connected' in wifi but when you try and go to a website it says "page is not available")....quote]
For me it happends when your ip and subnet mask (in connection card settings) dont match with the wifi net you are connecting to... the pda found and connect but can not go online because is not a part of the right network (i.e. 192.168.0.1 and 10.0.0.2 usually..or subnet 255.255.255.0 and 255.0.0.0) byez!
Click to expand...
Click to collapse
Hi, I have done a lot of searching on this topic, but haven't been able to find anything definitive on the best way to install blackberry connect. I am about to pick up a Siemens SX66 (Cingular version, but will be using on Tmobile) and want to make sure that I will be able to get the blackberry functionality to work.
I have a few questions/comments/observations that I would love to get everyones feedback on. If there something out there that explains how to get it working, I am sorry and please feel free to point me in the right direction.
1. My understanding is that the blackberry connect software is in the extended rom. So far I have been able to find the following cab files which I believe have the blackberry software: htc_pocketpc_tmo_germany_2.0.0.25-18.cab, HTC_PocketPC_TMO_Austria_Germany_Load_Working.cab and htc_pocketpc_tmo_england_2.0.0.25-18.cab. Not sure what else is in here, but it looks like the blackberry client is there as well.
2. If I use one of those roms, what language will the software be? Will have to use the tmobile UK version for english?
3. I have been reading about people have problems with the phone rom. These are post from a while back, it seems that the UK blackberry client need version 1.0 and the german version need 1.06? Is this correct or can I use the lasted phone rom?
4. Is there any limitations on the System Rom or Extended Rom? Do I need a specific version? I want to make sure I have english on the device though.
5. Let's say I do get all the right software. Is there a problem in the US where Blackberry won't register Blackberry Connect PINs? I was reading in another forum that someone was having a problem with this on their SX66 and also I am upgrading from a Sony Ericsson P910a where I couldn't get my PIN added to Blackberry servers.
The main reason I want the device is to replace my blackberry and this is extremely important. Other functionality is awesome, but secondary as I need to make sure I have access to my corporate email.
Any help would be greatly appreciated!!! Thanks!
There are 2 threads in the blue angel section that have Blackberry connect ih the title. Might be of help.
Thanks saw those posts after, I figured the info would be in this section. I posted some questions there as well, but any help would be appreciated. Not sure if this is going to work....oh well..
To the best of my knowledge...
NOBODY has been able to make the BB Connect software work on SX66 on Cingular.
I've all but given up. Maybe WM2005 will be different...
Crap, though I take it the problem is Cingular not the phone right? Do you know if anyone has been able to get it to work on T-Mobile? What is the problem you are having, is it the PIN / IMEI registration issue?
that's certainly a part of it...
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Re: that's certainly a part of it...
goestoeleven said:
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Click to expand...
Click to collapse
Umm i hate to say this but also that PIN number is alos tied to a carrier, and RIM will NOT release that PIN number to be used on another carrier's network, i know, i am a data support rep with Cingular. if you want something just like the Blackberry then go pay and get the GoodLink solution, otherwise i wouldnt complain about something free that cingular offers, I use it and i agree it isnt the best but works pretty damn well considering it FREE!!! for the PErsonal Edition. Besides, if you wanted to use the BWC (BlackBerry Web client) it isnt exactly Push either, the only forms available are the Redirector and the BES, but considering Congular is offering a solution for FREE i woulnt complain if i were you. If you wanna get mad at not having that solution get mad at RIM not Cingular...... :!:
Re: that's certainly a part of it...
Well I have the desktop software in english and just installed the german software on my sx66. I think I got it to connect but its hard to tell. Iwonder if there is any other software out there....
goestoeleven said:
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Click to expand...
Click to collapse
Damm, I actually just found the software for 2.0 software for Tmobile UK. Now it only gets an IP address for two seconds then looses it. I think its the same problem I had with my p910a I can't get the server to recognize it.
Please prove me wrong!
Figure out how to make this work, and you'll be the hero of every Cingular / SX66 user on this board!
I am getting much closer now, I hacked (hex edit) one of the dll files to point to an IP address of 206.51.26.192 instead of 206.51.26.189. I know the .192 is the right address from my old blackberry. Now I actually stay live on the APN with an IP address and everything, where before I would get one for a second and get kicked out. I think it's a matter of registering it now. If anyone wants to try this dll, replace the one in the windows directory. Also I will upload the version of blackberry connect I am using... Please try as well...
Here is the dll I mentioned...replace this with the one in windows directory
Seem s like you are getting somewere on this issue.
Feel like writing a How to so that we can post it on wiki?
If you need help PM me I can also move what ever files that you like on the FTP site.
Thanks, just haven't gotten it to work totally yet, but that may just need a call to Tmobile to ask them to set it up. I have made progress in the fact that my blackberry.net apn now stays connected, where before it would disconnect after a minute or two. I think I am half way there. Need some more people to play around who have tried before to see if they get anywhere...
Can you also post the desktop software version you're using?
There hasn't been a recent posting of the BB Config software in quite some time...
Thanks!
It's too large, check the ftp server. look for somethign called bb_desktop_sw_mda3_20.exe It's up there somewhere.... poke around uploads as well...
Oh wait... I got it from tmobile directly, hehehe...
http://www.t-mobile.de/business/blackberry/smallbusiness/1,8236,8577-_,00.html
So you're using the German version?
Make it work, and I won't care what language it's in!
I agree, first I tried the german one, before I found the Tmobile Uk one. Did you try downloading everything and installing?
yup...
still can't make it work on my end... although I haven't changed anything in Hex...
Try the dll I fixed up also, let me know if it makes any difference....
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
This is a very sad thing!
I have my Tilt (thankfully got the defective one replaced!) and I set it up to sync with my exchange 2007 server which should be push e-mail. In fact I know it is....
On the AT&T stock rom, it stays connected 24/7, never goes offline which is what it's supposed to do.
I get home, flash on the HTC ROM. Set up the partnership with my server, and I look, an hour later it's offline, showing last synchronized 45 minutes ago. I hit sync, it syncs, stays online for maybe ten minutes, then the same thing.
I've tried every cooked ROM too, same deal.
When I do manually sync, it doesnt try to connect to the network, it's already connected. I was wondering if the network settings may need to be tweaked...?
I've already tried adding an exclusive in task manager for activesync.
I'm using a Tilt and on AT&T.
I'm really going to be upset if Im locked to the AT&T rom just because the other ROMS dont handle active sync properly...and I can't beleive that the stock HTC rom has a problem like this...so I'm wondering if the network wizard may not be entering all of the proper settings...
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!
I'm wondering if it's you. it works fine for thousands of other people, and for you, 2 phones it's been "broke"
I had my phone disconnectng from active sync. It didnt bother me in the least because I'm not updating my phone but maybe once a day, i really dont care if it disconnects every 15 minutes. After I found out it was my USB hub, it's worked perfectly ever since. And I never once blamed the phone.
Hey now...no need for any snippy tones there...
I was asking for help here, not looking to be blamed as the source....
Exchange 2007 is supposed to remain totally connected 24/7....and it isnt. And Ive been able to recreate the problem on two separate devices....
So just looking to see if anyone else had had the same.....
lostinvt said:
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!
Click to expand...
Click to collapse
You must admit - this statement boggles the mind. You expect AT&T to replace a device because it only works right on their network with the software they shipped on it? Umm, that's their whole EXCUSE for shipping custom ROMs and you're busily proving them right....
It's obviously too late to ask you not to return a hacked device as "defective" and f$ck it all up for the rest of us, but please don't do it again!!!!!!!!!!!!
Your actual question would probably better be phrased as "Anyone on AT&T managing to keep ActiveSync continuously connected to Exchange 2007 with non-AT&T ROM?"
Not at all...I actually had a boat of other problems with my first Tilt..I did not in any way return it because of this problem...
Im not daft...I would never go back to AT&T and ask them to replace something because I monkeyed with it and broke it...
My scroll wheel stopped working along with my GPS....which is why I returned it...after restoring the AT&T ROM back onto it.
So...I will just drop this since it seems as if nobody actually can listen to my problem and offer up solutions,but would rather take potshots at their impressions of my behavior.
lostinvt said:
would rather take potshots at their impressions of my behavior.
Click to expand...
Click to collapse
No offense, but if you write more clearly you will be misunderstood less.
the first was defective, it it exhibited the exact same behavior doesn't read many other ways than "I returned the last one for this problem".
i gave you a suggestion to start looking at. AT&T and us posters arent out to get you. trust me.
this may sound kind of obvious, but did you check your sync schedule in ActiveSync? Make sure it is set to as items arrive.
I have my activesync working fine with Exchange 2003 on AT&T's network.
Only other thing I can think is if you have KaiserTweak set to disconnnect GPRS automatically after X amount of time.
I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.
me + kaiser + htc rom + exchange 2007 + at&t network = working just fine
eric b
Psy....
THANK YOU!
At least Im not nutso...
I am using the clear AT&T ROM which actually runs very well...its just the customizer in me that needs to make things better even if they arent broken!
Everybody else...sorry if we got off on the wrong foot with this thread...
Start fresh?
I wanted to throw an update out there....
My desire to figure this out got the best of me, so Ive been pretty much just flashing and experimenting for the last few days, and I think I may have actually figured this out....
It looks like it IS something to do with the network wizard. I pulled out a cingular settings cab from my hermes days. Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
Nice work! What I've done to track this kind of thing is to use DotFred's TaskManager and export the *entire* registry before and after, then use a "diff" type utility to compare the two. Some obvious timestamps, etc, always change but it's usually pretty apparent where the change(s) were.
Might be interesting to do that between your working config and the wizard's config and see if there's just one or two settings different....
Richard
lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
I wonder what all there is in the cab file? I haven't tested it on my Tilt but on the 8525 if I canceled the customization and inputed the network settings myself it didn't stay connected.
Where do I get a copy of this cab file so I can look at it?
I'm attaching the cab for the settings....been working like a champ for over a day now, so Im going to call this issue resolved in my book....
rsoloman,
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Sounds like a scooby doo mystery to me!
lostinvt said:
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Click to expand...
Click to collapse
Well, personally I'm happy on the AT&T ROM, so it will take someone else running the .reg file extractions. I'll be happy to help analyze the two, but right now it won't be me extracting them
Richard
For the record I'm using a tilt flashed to HTC ROM on at&t without any AS problems running Exchange Push.
I always manually input the at&t settings though.
Mine actually worked fine both the stock AT&T rom and the HTC rom. I just started having this problem with duty's touchflo tilt rom. The cab posted here did not make any change for me. Any other suggestions?
ActiveSync BOOSTER
Is there a way to boost up speed of Sync
Is there a any software or Cab file for it ?
Also want to know after we sync Phone
It keeps repeating to sync, is there a way to stop it ?
With removing the phone
Please Help
I've searched for an answer in these forums and can't find one. I have tried some suggestions from here to no avail. Well...here's the problem. I've had my Tilt for a couple of months. All has been great and i love it...up until now.
I've put several roms on it and they've all worked fine. Got that down...I thought. I can't get activesync to see the tilt on any of my computers. It won't find it on the laptop I've been using to load. My desktop at work, that I've been using sometimes to load it, won't see it and it won't even connect on a new computer in my office with fresh ASync 4.5. Like I said....it has been working fine I just decided today to load a new Dutty rom and I can't even hook up. Wow....this is so aggravating. I've uninstalled and reinstalled several times. Activesync is still on the tilt too. I've killed the program in taskmgr. I've stopped all running apps in the tilt. I have 2 different cables also. By the way....I don't care to wipe it clean...if I need to. Any suggestions as to what I can do? If anyone's got any clues to what my problem could be I would be eternally grateful. Thanks in advance for responses.
Desparate!
Please help me....if you can. I know there's a tremendous amount of knowledge here. Surely someone's been through this same problem and was able to fix it. I've seen another post similar to this and he's not getting an answer to his problem either. If I we need to contact HTC....please recommend that. Some of you "tilt masters" please respond. Thanks in advance.
Also I had a similar problem and i had installed a blackberry program on my tilt. That created a connection problem between my tilt and the sync program and it couldnt see my tilt. I figured out that the blackberry desktop program thought it had dibs on my tilt because the bb was on my tilt. I removed the BB off my tilt it did a hard reset and then proceeded to manually remove every windows mobile device partnership there were many. Rebooted my computer and tried it again and it worked. You could try a hard reset and then and then use system restore to a few days before you had the problem and see if you can trick it.
I had this problem.
Hard-Reset fixed it
Thanks for the replies....I've tried the hard reset twice and that didn't work either. Have been on the phone with HTC support and we did several things. Still not working. He was supposed to call me back in 10 min but didn't for a couple of hours. Anyway...I've got to contact them back and take up where we left off. Surely we can get this thing going again. If HTC can fix it....no one can. When we get it up and going...i'll report back here for others future needs. The phone works great besides that!
Again thank....and anyone else have a suggestion.
Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679
Thanks..
Check the USB pins on the unit, mine were bent down and did not make contact, i think from memory the 3rd pin in is the data connection.
Derek