Database Develop

I love this ROM!

I flashed my MDA about a week ago, and thanks to this forum (everybody), and XCPUScalar, I have a unit that boots up a full 80 seconds faster (from about 190) runs substantially faster, like getting immediate response from Pocket Informant instead of waiting 8 or so seconds, and has needed no soft-resetting since I upgraded (although one should do it on occaision, so I do). I have installed about 35 apps, and that process was cut from a few hours to less than two (with distractions).
I have one issue, and it probably isn't the MDA. My WiFi won't connect with my XP home workgroup network. I'm looking into that. Any help would be welcomed.
Did I mention I'm a newbie? And if you haven't done this yet and you're having a hard time finding instructions, there all in the installation file, just make your backups and jump in, but make sure you have the right ROM/hardware combo and phone service.

Is a MDA the same as a Cingular 8125?
Which ROM did you use?
What did you use to backup?
I'm a newbie also. I want to do this. I've been reading this forum for 2 weeks. I still don't have much of a clue. If I was certain that I could get back to where I am if I screwed up, I'd be more willing to "jump in". I have flashed routers before so it's not totally foreign to me.
Thanks for any help/advice that you are kind enough to throw my way,
Porter

Which ROM is this?

Yes. Could you identify this marvelous ROM?

yes, i love her, too.

Since I've not heard about an update to XCPUScalar which supports OMAP processors, I think this guy has got the wrong forum.

you say you love the rom! But which ****ing rom do you mean exactly?

Sorry. T-mobile USA 2.24 Custom ROM
Here's the link that got me there:
http://forum.xda-developers.com/viewtopic.php?t=53300&highlight=tmobile+motorola
There is another ROM for other service providers (Cingular) that I hear is just like this one but has a higher number, like 3.x. There is a link in the thread on page 7 or so. ??? There is also a newer version of the T-Mo USA ROM available, but I can't reflect on that.
The MDA also goes by the Name MDA vario, Qtek 1900 (I think), and Wizard. I don't know of any other names. I learned this by searching for leather cases on Ebay. The pictures said it all. I highly recommend being sure you know all the names, particularly the HTC name, of your unit before trying to tell it with a new ROM what model it is. If they don't match, you could mess up irreparably, although there are developers here who might argue about the irreparable part, I don't have the skills or time they do.
Read, be sure it all matches, and *then* thake the plunge!

Hey, the XCPU Scalar works. ???
I am one of those people who is willing to try unheard-of things. ImmierSoft made my MDA go faster, I don't particularly care how.
And I'm not a guy.

XCPUScalar uses a different processor than what the Wizard uses. Unless you are imagining things, you are probably using a ppc other than the Wizard.

Did it not appear that I understood...
... the processor types were different? It's not helpful to be condescending for you or for the person you're talking to. It's Immiersoft's XCPUScalar, and a T-Mobile MDA (US), which is the Wizard. There are certain things I can do woth the software to make the unit crash.
"There was a little girl who said why
can't I see my ear with my eye
I'm sure I cn do it
if I put my mind to it
You never do know til you try!"
Why so negative?

I'm signing off of this forum
I'm pretty fed up with the lack of social skills on this forum, particularly the moderators. I personally can't afford to risk/try this kind of hard work at this point in my life. If you have further questions, please search the forum, there are likely some sort of answers to your question. (e.g. looking up the latest ROMs for your model to see what's available to you rather than asking me what I'm talking about. thanks all for your interst and time!

...nevermind...

Janis, if you have a Wizard (and not, for example, a Magician - check the pics on the forum index) then XCPUScalar has no effect on your processor speed. I checked their website, and they still do not support OMAP processors. XCPUScalar is designed for (Intel) XScale processors (and one other type, which escapes me) - it is not a generic ARM overclocker. So far, only OMAPclock is able to overclock the OMAP processor in the Wizard.
I also think some people on this forum should grow up and stop acting like children when someone says something they don't like, or in a manner they do not like. I don't see your reasoning, Janis, behind "spitting the dummy out" when someone wants to know what exactly you are talking about when you start a brand new thread with no reference to anything solid in the body of it.

What is funny though, the first post of Janis contained comments and 1 question:
"I have one issue, and it probably isn't the MDA. My WiFi won't connect with my XP home workgroup network. I'm looking into that. Any help would be welcomed."
Maybe one of you "experts" could try to answer or help on that one........

wifi problem
i just upgraded to the Tmobile 2.26 ROM and also have the same wifi problem... my wifi wont connect to my dlink 900AP access point. It was working fine before the upgrade. Any ideas? Thanks

Not sure if this is the case, but I'll give it a shot.
If you just upgraded your ROM, I believe it wipes out any registry settings you had previously changed.
In the case of a wifi network, if you're running an 802.11g-only network then you will have to go back in to the registry of your Wizard and enable 802.11g on the Wizard for it to connect.
You'll also need to re-enter any network keys as they were wiped out as well.

Like i said the processor for XCPUScalar is for XScale, not OMAP (which is what the Wizard uses). I'm sorry if you took my comment in the wrong manner and took it personally.
As for the question in your original post, well check to see which network you are on (G, B, or mixed). The Wizard is originally set on B without registry changes (unless T-Mobile fixed this). If you have set your wireless network setup with a password, try setting up your network without a password just to confirm if a connection can be made and your problem is a security issue. If that doesn't work, I find that making registry changes to the MDA for a G connection works perfectly whenever I try this. Just make sure you set your router on the G network and try again. Also try to set you wireless connections on your phone to performance and see if that changes anything.
And for the others don't judge me. How many times have I asked for help and got no response or a negative one. I don't even recall ever getting a thankyou for helping anyone on this site. Everyone tends to ask for help then I never hear from them again. Sound familiar? I thought so.

I decided to edit out my venting ... doesn't do any good ...
btw, I agree that you should check out your registry settings regarding the WiFi.....

"Hey guys, this ROM is great!!"
"Which ROM?"
"**** you!!"

Blackberry Connect (2 or 4) and WM6

i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...

Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC

i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well

does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases

I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC

i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!

I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.

Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.

georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.

Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...

BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip

On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?

Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone

hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab

hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC

BB Connect from HTC
Anyone have tried this ?

[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC

Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.

mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC

750V with Vodafone WM6.
Now it flashes with an IP for about a second.

ActiveSync disconnects on any non-AT&T ROM!

This is a very sad thing!
I have my Tilt (thankfully got the defective one replaced!) and I set it up to sync with my exchange 2007 server which should be push e-mail. In fact I know it is....
On the AT&T stock rom, it stays connected 24/7, never goes offline which is what it's supposed to do.
I get home, flash on the HTC ROM. Set up the partnership with my server, and I look, an hour later it's offline, showing last synchronized 45 minutes ago. I hit sync, it syncs, stays online for maybe ten minutes, then the same thing.
I've tried every cooked ROM too, same deal.
When I do manually sync, it doesnt try to connect to the network, it's already connected. I was wondering if the network settings may need to be tweaked...?
I've already tried adding an exclusive in task manager for activesync.
I'm using a Tilt and on AT&T.
I'm really going to be upset if Im locked to the AT&T rom just because the other ROMS dont handle active sync properly...and I can't beleive that the stock HTC rom has a problem like this...so I'm wondering if the network wizard may not be entering all of the proper settings...
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!

I'm wondering if it's you. it works fine for thousands of other people, and for you, 2 phones it's been "broke"
I had my phone disconnectng from active sync. It didnt bother me in the least because I'm not updating my phone but maybe once a day, i really dont care if it disconnects every 15 minutes. After I found out it was my USB hub, it's worked perfectly ever since. And I never once blamed the phone.

Hey now...no need for any snippy tones there...
I was asking for help here, not looking to be blamed as the source....
Exchange 2007 is supposed to remain totally connected 24/7....and it isnt. And Ive been able to recreate the problem on two separate devices....
So just looking to see if anyone else had had the same.....

lostinvt said:
Oh, and as a side note, this is my second Tilt, the first was defective, it it exhibited the exact same behavior. AT&T ROM stays connected properly, non-stock ROM disconnects....
Any advise? I dont want to be stuck with AT&T!
Click to expand...
Click to collapse
You must admit - this statement boggles the mind. You expect AT&T to replace a device because it only works right on their network with the software they shipped on it? Umm, that's their whole EXCUSE for shipping custom ROMs and you're busily proving them right....
It's obviously too late to ask you not to return a hacked device as "defective" and f$ck it all up for the rest of us, but please don't do it again!!!!!!!!!!!!
Your actual question would probably better be phrased as "Anyone on AT&T managing to keep ActiveSync continuously connected to Exchange 2007 with non-AT&T ROM?"

Not at all...I actually had a boat of other problems with my first Tilt..I did not in any way return it because of this problem...
Im not daft...I would never go back to AT&T and ask them to replace something because I monkeyed with it and broke it...
My scroll wheel stopped working along with my GPS....which is why I returned it...after restoring the AT&T ROM back onto it.
So...I will just drop this since it seems as if nobody actually can listen to my problem and offer up solutions,but would rather take potshots at their impressions of my behavior.

lostinvt said:
would rather take potshots at their impressions of my behavior.
Click to expand...
Click to collapse
No offense, but if you write more clearly you will be misunderstood less.
the first was defective, it it exhibited the exact same behavior doesn't read many other ways than "I returned the last one for this problem".

i gave you a suggestion to start looking at. AT&T and us posters arent out to get you. trust me.

this may sound kind of obvious, but did you check your sync schedule in ActiveSync? Make sure it is set to as items arrive.
I have my activesync working fine with Exchange 2003 on AT&T's network.
Only other thing I can think is if you have KaiserTweak set to disconnnect GPRS automatically after X amount of time.

I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.

me + kaiser + htc rom + exchange 2007 + at&t network = working just fine
eric b

Psy....
THANK YOU!
At least Im not nutso...
I am using the clear AT&T ROM which actually runs very well...its just the customizer in me that needs to make things better even if they arent broken!
Everybody else...sorry if we got off on the wrong foot with this thread...
Start fresh?

I wanted to throw an update out there....
My desire to figure this out got the best of me, so Ive been pretty much just flashing and experimenting for the last few days, and I think I may have actually figured this out....
It looks like it IS something to do with the network wizard. I pulled out a cingular settings cab from my hermes days. Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....

lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
Nice work! What I've done to track this kind of thing is to use DotFred's TaskManager and export the *entire* registry before and after, then use a "diff" type utility to compare the two. Some obvious timestamps, etc, always change but it's usually pretty apparent where the change(s) were.
Might be interesting to do that between your working config and the wizard's config and see if there's just one or two settings different....
Richard

lostinvt said:
Flashed on the HTC rom, cancelled the network wizard, install it, and my AS has been connected for hours and hours. Did the same with one of the new cooked ROMs, same thing. So it looks like something just isnt quite right with the network wizard when it puts in the AT&T settings....
Click to expand...
Click to collapse
I wonder what all there is in the cab file? I haven't tested it on my Tilt but on the 8525 if I canceled the customization and inputed the network settings myself it didn't stay connected.
Where do I get a copy of this cab file so I can look at it?

I'm attaching the cab for the settings....been working like a champ for over a day now, so Im going to call this issue resolved in my book....

rsoloman,
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Sounds like a scooby doo mystery to me!

lostinvt said:
Sounds like a plan...there definitely has to be something different between the AT&T settings both in the cab and included in the AT&T ROM versus what comes with the network wizard......
Click to expand...
Click to collapse
Well, personally I'm happy on the AT&T ROM, so it will take someone else running the .reg file extractions. I'll be happy to help analyze the two, but right now it won't be me extracting them
Richard

For the record I'm using a tilt flashed to HTC ROM on at&t without any AS problems running Exchange Push.
I always manually input the at&t settings though.

Mine actually worked fine both the stock AT&T rom and the HTC rom. I just started having this problem with duty's touchflo tilt rom. The cab posted here did not make any change for me. Any other suggestions?

ActiveSync BOOSTER
Is there a way to boost up speed of Sync
Is there a any software or Cab file for it ?
Also want to know after we sync Phone
It keeps repeating to sync, is there a way to stop it ?
With removing the phone
Please Help

Blackberry Connect on S730

Hi,
Please can someone talk me through trying to get BB Connect 4 working with the new HTC S730 (Wings)?
I'm trying to move across from a BlackBerry Pearl, so I know my subscription with my operator (Telenor Sweden) is working just fine.
I've tried using BBC 4.0.0.76 and 4.0.0.84 for WM6 Standard.
I enter BBC app on the phone and click Menu > Register Now. Back on the home page the BB status changes from Not Connected > Network Available > Data Tunnel Available > Not Connected. I have no PIN (Pending) and no IP.
I also tried BBC 2.1.2.39 but this just stays at Not Connected. Any idea why this is not working, since BBC 2 is not supposed to be so fussy about checking if the device is supported?
When I try to connect with the BBC Desktop software, it says PIN is "Unknown Type"
So....
I'm guessing the S730 isn't certified by RIM yet and I need to trick BBC 4 into thinking it's running on a supported device.
Please can someone help with the correct steps? Here are some of my questions:
1. I have the S730 Nordic version so I guess the first thing I need to do is dump the ROM from my own device. Am I better off using the grab_it ROM dumper from here - http://forum.xda-developers.com/showthread.php?t=238945 or using this method http://wiki.xda-developers.com/index...x_HowToDumpRom ? I'm struggling so far with the pdocread method as I my device seems to be application locked. I'll post more about this in the S730 ROM thread.
2. Assuming I get the ROM dump, I need to use a Hex Editor to change the GetDeviceInfo from HTC-Wings ( I guess) to a supported device. Can anyone tell me the best device to change this to e.g. HTC-Vox? I've read reports of BBC 4.0 working on the S710 Vox but also people have asked for help hacking it. Which device string should I use?
3. I'm a complete noob when it comes to repacking ROMs and flashing WM devices. Can anyone point me to step-by-step guide to this?
I've tried to read around this subject but I've quickly exceeded my technical comfort zone to put it mildly, so any help with this would be really appreciated!

You carrier needs to support the Blackberry Gateway forwarding. If it does not, from your device, then Blackberry Connect will not work. They literally need to sort of "open ports" on their system.
I tried a Blackberry Connect activation on a Samsung BlackJack II, on AT&T here in the states, with no luck. Same symptoms as you describe.
Read all of the comments here to see what other people have done.
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Good luck,
Matt

I'm not ready to give up on the S730 and BB Connect just yet.
My operator supports BB Connect on Sony Ericsson and Nokia smartphones but say there is no reason why HTC models shouldn't work. I have a colleague with a HTC Tytn II, also with Telenor connecting perfectly with my company BES, so there is some hope.
The hack described in this thread http://forum.xda-developers.com/showthread.php?t=294218 basically tricks BBC into thinking it's running on a device which is supported by RIM and your operator. That's what I'm trying to do. That's where I was going with my questions.
But I don't know a) how to dump my ROM b) what devicetype value to set and c) how to repack the ROM and reflash the device.
Has anyone else tried the same thing and can help a noob like me?
bigflavor said:
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Click to expand...
Click to collapse
Not an option for me, unfortunately. My company only support BES and so either I get BBC working or the S730 goes up on ebay. I'm back to using my Pearl until I get this working.

Is there anyone else out there trying to get BlackBerry Connect working on the S730?

also trying for BB connect
I just tried to install three different version yesterday with no success.
4.0.0.76 (wm5 version)
4.0.0.84 (wm6)
4.0.0.91 (wm6)
http://www.sems.org/entry.asp?ENTRY_ID=276
They all installed properly but did not generate a PIN number, it was stuck at "PIN pending".
It went thru the same sequence "Network Available" --> "Data Tunnel Available" --> "Not Connected"
have not tried version 2.1 yet will do that shortly

Tried 2.1
update:
Tried 2.1 on the s730, it does not function.
If anyone has anymore ideas please post, and i will try it .

I know this is a separate platform, but perhaps bbconnect for the HTC tilt might work. AT&T have it available here http://www.america.htc.com/mobile/connect/8925/

Has anyone tried emoze as a push solution?

Has anyone found a working BB Client for BB Internet Service for The S730?

I see over the years ... nobody read carefull Threads!
Black Berry is a complicate and secure Application!
How they generate a Pin?
The Device Name, Device OS Version and Build Nr. are for the generation importent. It means ... if your modded os have a wrong OS Version and Build Nr. you doesnt get a Pin and you see every time "Pin pending"
How i can fix this?
Try to use a Original HTC Rom. If you get Pin Pending again ... try to reg edit your Build Nr. If its work, you have the right version Nr.s you need and Build Nr.! Then you can ask you favorit Rom Builder for changing does numbers.
Use Black Berry Connect Clients over 4.0.0.90
If you know the right ids ... publish it!

But where can I get the right rom for my HTC S730 and where can I get a BB client over 4.0.0.90

Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools

NetrunnerAT said:
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
Click to expand...
Click to collapse
That's a cool site. Thanks.
Also, did you test this on the S730 with your theory?

It dosn't work. No PIN.
New Ideas ?

your carrier needs to allow your phone to access the Blackberry servers. It's a provisioning thing. Call them and try to get it added... try to convince them just to add it and see what happens, even if you don't have a Blackberry. They might have a special thing... like AT&T's Tilt has the ability to use blackberry connect, so AT&T probably has some special feature for provisioning that enables a non-blackberry phone to be provisioned for blackberry service.
Without this connection allowed by your carrier connecting you to RIM's servers... Blackberry Connect will not work.
Prove me wrong. (seriously, because I want to get this working for myself )

I have the blackberry connect service activated for my s730 but can not get a pin number. I will try different versions, if anyone has anymore ideas please post
Thanks

O2 payandgo settings for Diamond - What's the problem with O2 ??

I can't understand why so simple things cannot be resolved in the life.
I can understand that an operator can decide to don't give some feature, but for what I understood the things should be like this:
1. all UK operators like 3, vodafone, t-mobile offers access to internet for pay and go customers. O2 says not, or that a lot of mobiles do not support it.
Now. I was with polaris/touch cruise able to surf with explorer and use google maps, just problems to update the weather in the main screen. And was ok for me.
Now, I switch to Diamond, the result? i cannot surf anymore and use google maps! Now the answer should be to swith to 3, but I needed O2 and is problematic to switch. Of course I will do if I won't find a solution.
So my question is, have you found a solution to surf and use google maps with O2 payandgo even on the Diamond?
if not, I'm stupid or how is possible that in 2008 a device should be not able to connect to service of O2, I mean, how is possible that O2 says that is the device not supported or that don't support them etc etc, I mean, who is wrong here, is O2 that is doing the possible to don't give this service to us or what? if is so, nobody did something to sign a petition and ask them to do what their competitors do, even more expensively, but with every UK operator is possible to surf, why just with O2 not!!!! Payandgo.
Let me know please.
if I need to flash the ROM, change, upgrade, or whatever you want to let it work let me know.
Thank you in advance,
your disperately,
payandgo... go.. go..

I would check your setting are the same as when you had the polaris/touch cruise, other than that you really need to change operator

Usually for paygo they route the internet using a different APN. This is usually because they block certain ports.
The operators usually say 'this device isnt suported' because their automatic system isnt able to SMS the provisioning to your phone. That doesnt mean you can't edit it manually.
Just copy the connection settings from another phone where it works onto your diamond.
It sounds like the auto setup in the diamond is using some different APN or a proxy, and your old device didnt.

of course I do manual settings... cannot work with the automatic that are into the htc.
I'm waiting some angel here of the forum that can help, for sure a lot of londiners are facing same problem with O2 and have some solution.

the exact same settings work fine on which other phone?
Or are you saying it just doesnt work any more no matter what phone you use?

Htc Touch Pro was working but I lost the settings and with the one found in forums doesnt work the Diamond
so I need settings from somebody that setted already the Diamond that is new, and for sure are the same but I do not have it and I need to find so I can set it manually.

Have you tried these?
http://www.filesaveas.com/gprs.html
Both contract and paygo. Also it really would help if you gave some more information like what settings you using already.
This is my third post and i still have no idea what your exact problem is. Yeah sure you can't get GPRS working in some way, but i don't know what way, and what settings your using - and so the possible cause.