O2 payandgo settings for Diamond - What's the problem with O2 ?? - Touch Diamond, MDA Compact IV General

I can't understand why so simple things cannot be resolved in the life.
I can understand that an operator can decide to don't give some feature, but for what I understood the things should be like this:
1. all UK operators like 3, vodafone, t-mobile offers access to internet for pay and go customers. O2 says not, or that a lot of mobiles do not support it.
Now. I was with polaris/touch cruise able to surf with explorer and use google maps, just problems to update the weather in the main screen. And was ok for me.
Now, I switch to Diamond, the result? i cannot surf anymore and use google maps! Now the answer should be to swith to 3, but I needed O2 and is problematic to switch. Of course I will do if I won't find a solution.
So my question is, have you found a solution to surf and use google maps with O2 payandgo even on the Diamond?
if not, I'm stupid or how is possible that in 2008 a device should be not able to connect to service of O2, I mean, how is possible that O2 says that is the device not supported or that don't support them etc etc, I mean, who is wrong here, is O2 that is doing the possible to don't give this service to us or what? if is so, nobody did something to sign a petition and ask them to do what their competitors do, even more expensively, but with every UK operator is possible to surf, why just with O2 not!!!! Payandgo.
Let me know please.
if I need to flash the ROM, change, upgrade, or whatever you want to let it work let me know.
Thank you in advance,
your disperately,
payandgo... go.. go..

I would check your setting are the same as when you had the polaris/touch cruise, other than that you really need to change operator

Usually for paygo they route the internet using a different APN. This is usually because they block certain ports.
The operators usually say 'this device isnt suported' because their automatic system isnt able to SMS the provisioning to your phone. That doesnt mean you can't edit it manually.
Just copy the connection settings from another phone where it works onto your diamond.
It sounds like the auto setup in the diamond is using some different APN or a proxy, and your old device didnt.

of course I do manual settings... cannot work with the automatic that are into the htc.
I'm waiting some angel here of the forum that can help, for sure a lot of londiners are facing same problem with O2 and have some solution.

the exact same settings work fine on which other phone?
Or are you saying it just doesnt work any more no matter what phone you use?

Htc Touch Pro was working but I lost the settings and with the one found in forums doesnt work the Diamond
so I need settings from somebody that setted already the Diamond that is new, and for sure are the same but I do not have it and I need to find so I can set it manually.

Have you tried these?
http://www.filesaveas.com/gprs.html
Both contract and paygo. Also it really would help if you gave some more information like what settings you using already.
This is my third post and i still have no idea what your exact problem is. Yeah sure you can't get GPRS working in some way, but i don't know what way, and what settings your using - and so the possible cause.

Related

Installing Blackberry Connect

Hi, I have done a lot of searching on this topic, but haven't been able to find anything definitive on the best way to install blackberry connect. I am about to pick up a Siemens SX66 (Cingular version, but will be using on Tmobile) and want to make sure that I will be able to get the blackberry functionality to work.
I have a few questions/comments/observations that I would love to get everyones feedback on. If there something out there that explains how to get it working, I am sorry and please feel free to point me in the right direction.
1. My understanding is that the blackberry connect software is in the extended rom. So far I have been able to find the following cab files which I believe have the blackberry software: htc_pocketpc_tmo_germany_2.0.0.25-18.cab, HTC_PocketPC_TMO_Austria_Germany_Load_Working.cab and htc_pocketpc_tmo_england_2.0.0.25-18.cab. Not sure what else is in here, but it looks like the blackberry client is there as well.
2. If I use one of those roms, what language will the software be? Will have to use the tmobile UK version for english?
3. I have been reading about people have problems with the phone rom. These are post from a while back, it seems that the UK blackberry client need version 1.0 and the german version need 1.06? Is this correct or can I use the lasted phone rom?
4. Is there any limitations on the System Rom or Extended Rom? Do I need a specific version? I want to make sure I have english on the device though.
5. Let's say I do get all the right software. Is there a problem in the US where Blackberry won't register Blackberry Connect PINs? I was reading in another forum that someone was having a problem with this on their SX66 and also I am upgrading from a Sony Ericsson P910a where I couldn't get my PIN added to Blackberry servers.
The main reason I want the device is to replace my blackberry and this is extremely important. Other functionality is awesome, but secondary as I need to make sure I have access to my corporate email.
Any help would be greatly appreciated!!! Thanks!
There are 2 threads in the blue angel section that have Blackberry connect ih the title. Might be of help.
Thanks saw those posts after, I figured the info would be in this section. I posted some questions there as well, but any help would be appreciated. Not sure if this is going to work....oh well..
To the best of my knowledge...
NOBODY has been able to make the BB Connect software work on SX66 on Cingular.
I've all but given up. Maybe WM2005 will be different...
Crap, though I take it the problem is Cingular not the phone right? Do you know if anyone has been able to get it to work on T-Mobile? What is the problem you are having, is it the PIN / IMEI registration issue?
that's certainly a part of it...
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Re: that's certainly a part of it...
goestoeleven said:
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Click to expand...
Click to collapse
Umm i hate to say this but also that PIN number is alos tied to a carrier, and RIM will NOT release that PIN number to be used on another carrier's network, i know, i am a data support rep with Cingular. if you want something just like the Blackberry then go pay and get the GoodLink solution, otherwise i wouldnt complain about something free that cingular offers, I use it and i agree it isnt the best but works pretty damn well considering it FREE!!! for the PErsonal Edition. Besides, if you wanted to use the BWC (BlackBerry Web client) it isnt exactly Push either, the only forms available are the Redirector and the BES, but considering Congular is offering a solution for FREE i woulnt complain if i were you. If you wanna get mad at not having that solution get mad at RIM not Cingular...... :!:
Re: that's certainly a part of it...
Well I have the desktop software in english and just installed the german software on my sx66. I think I got it to connect but its hard to tell. Iwonder if there is any other software out there....
goestoeleven said:
pin/imei, software (nothing supported). The blackberry connect desktop software for XDA2 is a couple years old and does not let you change the PIN.
No way to configure, so you're hosed. The O2 software on the pocket pc is also locked to an O2 blackberry APN. No way to change that either.
It's possible that somebody somewhere has taken the T-Mobile German MDAIII software -- and somehow obtained the T-Mobile desktop software -- and translated both --
but I doubt it! Definitely not to be found anywhere on this site...
Of course, I'D LOVE TO BE PROVEN WRONG, as this has been the biggest issue for me since I got this bloody device.
Bottom line: either use the crap XpressMail redirector product that Cingular offers, or use IMAP/POP on a "pull" basis. Neither way works well. We're screwed until Cingular steps up to the plate or until some brave soul on this board saves us all!
Click to expand...
Click to collapse
Damm, I actually just found the software for 2.0 software for Tmobile UK. Now it only gets an IP address for two seconds then looses it. I think its the same problem I had with my p910a I can't get the server to recognize it.
Please prove me wrong!
Figure out how to make this work, and you'll be the hero of every Cingular / SX66 user on this board!
I am getting much closer now, I hacked (hex edit) one of the dll files to point to an IP address of 206.51.26.192 instead of 206.51.26.189. I know the .192 is the right address from my old blackberry. Now I actually stay live on the APN with an IP address and everything, where before I would get one for a second and get kicked out. I think it's a matter of registering it now. If anyone wants to try this dll, replace the one in the windows directory. Also I will upload the version of blackberry connect I am using... Please try as well...
Here is the dll I mentioned...replace this with the one in windows directory
Seem s like you are getting somewere on this issue.
Feel like writing a How to so that we can post it on wiki?
If you need help PM me I can also move what ever files that you like on the FTP site.
Thanks, just haven't gotten it to work totally yet, but that may just need a call to Tmobile to ask them to set it up. I have made progress in the fact that my blackberry.net apn now stays connected, where before it would disconnect after a minute or two. I think I am half way there. Need some more people to play around who have tried before to see if they get anywhere...
Can you also post the desktop software version you're using?
There hasn't been a recent posting of the BB Config software in quite some time...
Thanks!
It's too large, check the ftp server. look for somethign called bb_desktop_sw_mda3_20.exe It's up there somewhere.... poke around uploads as well...
Oh wait... I got it from tmobile directly, hehehe...
http://www.t-mobile.de/business/blackberry/smallbusiness/1,8236,8577-_,00.html
So you're using the German version?
Make it work, and I won't care what language it's in!
I agree, first I tried the german one, before I found the Tmobile Uk one. Did you try downloading everything and installing?
yup...
still can't make it work on my end... although I haven't changed anything in Hex...
Try the dll I fixed up also, let me know if it makes any difference....

Orange SPV M700 - It has GPS?

Hi everyone
I am new here and this is my first post, so please go easy on me.
I wanted to start by congratulating all the contributors on this forum on a great job done.
I’ve just ordered an SPV M700 on Orange and have a couple of questions
1- I need to unlock the phone to be able to use an O2 Sim card in it.
2- I want to be able to use The GPS in the phone.
To use the O2 SIM do I just need to do a SIM unlock, or do I have to do a CID unlock to? Err what is CID in the first place
My understanding is that the Orange ROM has the GPS enabled, am I correct? If so, all I have to do is install software like Tomtom Navigator and all should work, right?
As you can see, I am not that technical and do not want to mess the phone up by venturing into un-chartered territories.
Thank you for any help
1, yes you just need a SIM unlock. You will find the necessary tools on this forum to do this.
2, it seems that the current batch of Orange phones are shipping with the gps enabled rom, so yes just install tomtom.
I think CID stands for country ID (or something like that), you only need to unlock this if you intend to install firmware from another country e.g. the gps enabled Depod firmware. Providing your orange supplied phone has their most recent firmware you won't have to worry about this.
I've just found out what orange are doing. ONLY their Business phones have it enabled.
So if you order the phone on a personal account you don't get the GPS enabled.
However if you order it on a business account you can have it.
The third option is to learn French and flash the publicly available french rom to it.
(That's assuming you want it to be supported by orange themselves)
Else use one of the cooked roms and you're sorted.
EDIT: I've just got off the phone to Orange. The third option above would still be covered by insurance. Though if anything goes wrong it would have to be listed as a technical fault and go back to their free post address.
no, you are wrong, i am personal account, the rom is gps enabled
You flashed it to enable it. The GPS ROM is there but with one of the earlier firmware versions which doesn't enable it. (I got my information directly from Orange. If you were lucky enough to get a business phone sent out to you then I'm extremely jealous (and ask you again to upload your firmware ) but after about 40 mins of bouncing me around centers and giving me lame excuses or saying they were the wrong department I finally got a straight answer out of 2 seperate departments saying this was indeed the case)
If you look on the Orange site:
Business:
http://www.business.orange.co.uk/se...s&c=OUKDevice&cid=1044134008063&extarg1=Phone
It can deliver you directly to your meetings, thanks to it's built-in GPS with Sat Nav from Orange.
Personal:
http://shop.orange.co.uk/shop/show/handset/orange_spv_m700/features
No mention of any GPS is listed.
I know the GPS is there and functions as I've used a cooked ROM to enable it.
Plus as has been pointed out you can freely get the Orange France version of the firmware which has GPS enabled.
no no no, i didn't flash it before enable it, i can use the gps with tomtom 6 when i first got the phone, i need to flash it because i need to make it sim unlock..( i got it on 28/02/07, from the orange shop)
and even the manual with my spv m700, it also mention about the gps.
siupiu said:
no no no, i didn't flash it before enable it, i can use the gps with tomtom 6 when i first got the phone, i need to flash it because i need to make it sim unlock..( i got it on 28/02/07, from the orange shop)
and even the manual with my spv m700, it also mention about the gps.
Click to expand...
Click to collapse
This is good News
I will get mine tomorrow - hopefully
Alas, I need to use an O2 Sim card though, so I must go down the SIM unlock route. I am in a dilemma between
1- Using the Prof's unlocking solution here
or
2- Paying up the $38 for peace of mind here here
Forget about solution 2
cedrick said:
Forget about solution 2
Click to expand...
Click to collapse
I second that
the-oneil said:
This is good News
I will get mine tomorrow - hopefully
Alas, I need to use an O2 Sim card though, so I must go down the SIM unlock route. I am in a dilemma between
1- Using the Prof's unlocking solution here
or
2- Paying up the $38 for peace of mind here here
Click to expand...
Click to collapse
you may to have a look of this post?
http://forum.xda-developers.com/showthread.php?t=296327
SPV M700
Just to let you all know:
I just spoke to Orange about upgrading my M600 to M700. Vry nice lady ( after three atempts) has confirmed that M700 has GPS receiver built in. It would not show anywhere on Comms but it is selectable once you install SatNav software and it is on COM9.
So I think that anewers the original question.
Happ Navigating
Got my SPV M700 from Orange yesterday.
I went into the favorit > Sat Nav & downloaded Orange's Sat Nav program (It woked a treat - No ROM flashing or anything ) It actually guided me back home.
So yes, Orange UK ROM is 100% GPS enabled.
the-oneil not all are coming with GPS enabled. I know as I've seen 2 so far which came without the GPS working. Must depend on the batch they send out.
i think that depends on which rom version, that one with the following version must have GPS..
Operator version : 19.123.1.615
ROM version: 1.23.61.5
Rom date : 01/25/07
Radio version : 1.30.00.01
Protocol version: 32.63.7020.08H
I didn`t have to enable GPS on my M700. I installed a sat nav system ( Navigon MN6) and it connected by itself. I have a black M700 but on a personal account. The black ones were originally only reserved for new business accounts. Don`t know if that is significant.
I have now just installed Route 66 Navigate 7 in place of Navigon but it can`t seem to connect to the GPS receiver. Anyone help with that? I can only find one way to access the GPS seetings, in Systems/connections/GPRS Settings, and the only option is to change from PAP Authentication to CHAP Authentication. I don`t know what the difference between them is ( I`m not a techie!!) but it makes no difference anyway.
Any advice would be appreciated
Don't confuse GPS (Global Positioning by Satellite) with GPRS (General Packet Radio Service). If you mess with the GPRS settings, you may stop your phone from being able to use mobile data.
The M700 doesn't come with the GPS control panel visible, and generally speaking you don't need it to. Windows Mobile 5 comes with a software patch which distributes a GPS signal to any application requiring it, but some GPS applications can't work with this. I presume Route 66 may be one of them (as is TomTom).
Go to your Route 66 settings, and in the GPS setting options, set COM port to COM9 and Baud rate to 57600, which are the default hardware settings for the M700.
Now go to somewhere with a clear view of the sky for about 10 minutes, to allow the program to download all the necessary satellite information.
the-oneil,
I did the same as you with my brothers Trinity but I have a small problem with the internet settings.
I downloaded a cab file from a forum request on this site but it did not work for me and so I then copied the settings from a site called 'filesaveas' and itwork for me except in one way.
When I try to access my brothers Hotmail account via Pocket MSN I could not do it, however when I accessed Hotmail via Internet Explorer it was ok.
So I have some kind of error in the settings somewhere that still needs to be resolved. I contacted O2 for the settings but they would not give them to me because it is not an O2 handset. The screen asks me repeatedly for 'Incoming Email Password', which is exactly the same one as when I use Internet Explorer to acces Hotmail.
So let me know if you get the above working on yours and perhaps I could copy your settings.
Cheers!
And good luck!
Thanks NeilM,
Trouble is, I`ve tried and tried to find somewhere in the Route 66 menu where I can change GPS settings, but no luck. I`ve been checking through the files using File Explorer but can`t find anything anywhere that allows me to do that. Can you suggest somewhere I might find it or would it be pretty obvious, like going into the main menu in Route 66 when it`s running, and looking for a GPS settings tab. There isn`t one. It has a tab called GPS information but that just gives GPS status info, no way of changing any settings. Guess I`m stuffed!!
According to the Route66 help, it only supports Bluetooth GPS, not inbuilt receivers.
In fact their compatibility list is so old, I wonder it works on any current device
NeilM said:
According to the Route66 help, it only supports Bluetooth GPS, not inbuilt receivers.
In fact their compatibility list is so old, I wonder it works on any current device
Click to expand...
Click to collapse
Thats great, thanks for letting me know, I can stop messing around with it now and go for something else or get a bluetooth receiver. The built in receiver isn`t that great anyway. I read somewhere that it was an 8 channel receiver. I have tried Navigon MN6 already with my M700 and I noticed that it`s positioning leaves a lot to be desired. I wondered if it might be something to do with the receiver as I didn`t expect it to be a SirfstarIII. So I might at some point just get myself a decent quality bluetooth SirfstarIII. Any recomendations?
Cheers for now

Blackberry Connect on S730

Hi,
Please can someone talk me through trying to get BB Connect 4 working with the new HTC S730 (Wings)?
I'm trying to move across from a BlackBerry Pearl, so I know my subscription with my operator (Telenor Sweden) is working just fine.
I've tried using BBC 4.0.0.76 and 4.0.0.84 for WM6 Standard.
I enter BBC app on the phone and click Menu > Register Now. Back on the home page the BB status changes from Not Connected > Network Available > Data Tunnel Available > Not Connected. I have no PIN (Pending) and no IP.
I also tried BBC 2.1.2.39 but this just stays at Not Connected. Any idea why this is not working, since BBC 2 is not supposed to be so fussy about checking if the device is supported?
When I try to connect with the BBC Desktop software, it says PIN is "Unknown Type"
So....
I'm guessing the S730 isn't certified by RIM yet and I need to trick BBC 4 into thinking it's running on a supported device.
Please can someone help with the correct steps? Here are some of my questions:
1. I have the S730 Nordic version so I guess the first thing I need to do is dump the ROM from my own device. Am I better off using the grab_it ROM dumper from here - http://forum.xda-developers.com/showthread.php?t=238945 or using this method http://wiki.xda-developers.com/index...x_HowToDumpRom ? I'm struggling so far with the pdocread method as I my device seems to be application locked. I'll post more about this in the S730 ROM thread.
2. Assuming I get the ROM dump, I need to use a Hex Editor to change the GetDeviceInfo from HTC-Wings ( I guess) to a supported device. Can anyone tell me the best device to change this to e.g. HTC-Vox? I've read reports of BBC 4.0 working on the S710 Vox but also people have asked for help hacking it. Which device string should I use?
3. I'm a complete noob when it comes to repacking ROMs and flashing WM devices. Can anyone point me to step-by-step guide to this?
I've tried to read around this subject but I've quickly exceeded my technical comfort zone to put it mildly, so any help with this would be really appreciated!
You carrier needs to support the Blackberry Gateway forwarding. If it does not, from your device, then Blackberry Connect will not work. They literally need to sort of "open ports" on their system.
I tried a Blackberry Connect activation on a Samsung BlackJack II, on AT&T here in the states, with no luck. Same symptoms as you describe.
Read all of the comments here to see what other people have done.
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Good luck,
Matt
I'm not ready to give up on the S730 and BB Connect just yet.
My operator supports BB Connect on Sony Ericsson and Nokia smartphones but say there is no reason why HTC models shouldn't work. I have a colleague with a HTC Tytn II, also with Telenor connecting perfectly with my company BES, so there is some hope.
The hack described in this thread http://forum.xda-developers.com/showthread.php?t=294218 basically tricks BBC into thinking it's running on a device which is supported by RIM and your operator. That's what I'm trying to do. That's where I was going with my questions.
But I don't know a) how to dump my ROM b) what devicetype value to set and c) how to repack the ROM and reflash the device.
Has anyone else tried the same thing and can help a noob like me?
bigflavor said:
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Click to expand...
Click to collapse
Not an option for me, unfortunately. My company only support BES and so either I get BBC working or the S730 goes up on ebay. I'm back to using my Pearl until I get this working.
Is there anyone else out there trying to get BlackBerry Connect working on the S730?
also trying for BB connect
I just tried to install three different version yesterday with no success.
4.0.0.76 (wm5 version)
4.0.0.84 (wm6)
4.0.0.91 (wm6)
http://www.sems.org/entry.asp?ENTRY_ID=276
They all installed properly but did not generate a PIN number, it was stuck at "PIN pending".
It went thru the same sequence "Network Available" --> "Data Tunnel Available" --> "Not Connected"
have not tried version 2.1 yet will do that shortly
Tried 2.1
update:
Tried 2.1 on the s730, it does not function.
If anyone has anymore ideas please post, and i will try it .
I know this is a separate platform, but perhaps bbconnect for the HTC tilt might work. AT&T have it available here http://www.america.htc.com/mobile/connect/8925/
Has anyone tried emoze as a push solution?
Has anyone found a working BB Client for BB Internet Service for The S730?
I see over the years ... nobody read carefull Threads!
Black Berry is a complicate and secure Application!
How they generate a Pin?
The Device Name, Device OS Version and Build Nr. are for the generation importent. It means ... if your modded os have a wrong OS Version and Build Nr. you doesnt get a Pin and you see every time "Pin pending"
How i can fix this?
Try to use a Original HTC Rom. If you get Pin Pending again ... try to reg edit your Build Nr. If its work, you have the right version Nr.s you need and Build Nr.! Then you can ask you favorit Rom Builder for changing does numbers.
Use Black Berry Connect Clients over 4.0.0.90
If you know the right ids ... publish it!
But where can I get the right rom for my HTC S730 and where can I get a BB client over 4.0.0.90
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
NetrunnerAT said:
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
Click to expand...
Click to collapse
That's a cool site. Thanks.
Also, did you test this on the S730 with your theory?
It dosn't work. No PIN.
New Ideas ?
your carrier needs to allow your phone to access the Blackberry servers. It's a provisioning thing. Call them and try to get it added... try to convince them just to add it and see what happens, even if you don't have a Blackberry. They might have a special thing... like AT&T's Tilt has the ability to use blackberry connect, so AT&T probably has some special feature for provisioning that enables a non-blackberry phone to be provisioned for blackberry service.
Without this connection allowed by your carrier connecting you to RIM's servers... Blackberry Connect will not work.
Prove me wrong. (seriously, because I want to get this working for myself )
I have the blackberry connect service activated for my s730 but can not get a pin number. I will try different versions, if anyone has anymore ideas please post
Thanks

One little question about upgrading...

Hello,
I've been following this forum for several months now and I've been studying how to flash and what can possibly go wrong and I now just about feel comfortable with trying it myself.
I really want to try Ausdim and Eliasweb's ROMs but I still have one question...
Quite a while ago I downloaded a file called "htcp3600-NWW_France_Setup" which should see to my network settings if I understood correctly but the thing is I quite often go to Spain and seeing as I have the SFR World option my service provider hands control over to one of their partner networks in Spain and the same happens when I go to England.
With a cooked ROM is this still possible or would I have to file some other files to allow me to use my phone in other countries??
Thank you very much for your help.
Doesn't anybody know??? Please... A little help will be greatly appreciated.
It's the same.
Bye.
theres a software called setup operator ! do a search for that it'll sort your problem out, i think!
HTC connection setup thats it ! it got loads a countries and providers
Thanks for the answers
I just had a look at Ausdim's V3 Full and I see the program you said (HTC Connection Setup) is already integrated so it looks like everything will run smoothly

Help for my father!

Hi guys, I am posting here just to solve one issue of my father's diamond.
I have one raphael, my father got a diamond, and it is different on provider informations.
My raphael automatically detects the provider's configuration, installing it on connections, I tryied it with my father's diamond, and his diamond doesnt take the provider's information, I dont know why. So, I have just configured it by my hand manually, using the necessary informations, all ok, it worked fine, he can work on internet, but the problem is that all times he power on his phone, come the warning that is trying to take provider's information, and automatically goes to the connections on settings tab, its a warning, I think that the cell phone doesnt detect that it is manually typed, and try again with a global icon on hardware's tasks.
Once I have already configured it, I would like to KILL this warning, he is a big disapointed with it, that appears sometimes.
Thanks for now
Hi....first of all...I am not an expert! I think the solution might be to go to 1) Settings......2)Connections and click on the connection setup symbol, (if you have it) this should set it up for you.....hope this helps
It the PDA goes automatically, but always repeat when i power on the phone
the last answer:flash the other rom
I will find it, but I dont know if I is easy to locate the portuguese rom as it is installed on his fone

Categories

Resources