ics and t-zones - Tilt, TyTN II, MDA Vario III General

So the other day i decide to try to ics (internet connection sharing) with my comp via usb. But when i try to go online on my comp(firefox ofcourse) i get a HTTP ERROR $CODE$ $MESSAGE$. i no you probably have to change up some settings which ive tried. ive tried in firefox and i no i have the right settings for the ful internet with t-zones........any suggestions?

anyone?.......

Got the start menue then go to the program then accesories at the top and it will say internet share but its gona move super slow

Is Active Sync connecting properly? On the phone, is the ICS program selected to use the USB connection and not bluetooth? Does the internet on your phone work just fine?
Also, make sure active sync is green before hitting connect in ICS.

thentertaina said:
So the other day i decide to try to ics (internet connection sharing) with my comp via usb. But when i try to go online on my comp(firefox ofcourse) i get a HTTP ERROR $CODE$ $MESSAGE$. i no you probably have to change up some settings which ive tried. ive tried in firefox and i no i have the right settings for the ful internet with t-zones........any suggestions?
Click to expand...
Click to collapse
Make sure you can browse on the device first...
Try a soft reset (pull the battery out while it's turned on)
also if you have XP SP2 or higher, load up command prompt
Start => Run => CMD => Click ok
now type these in
netsh int ip reset resetlog.txt
netsh init ip delete arpcache
netsh winsock reset all
restart your computer and try your internet sharing again.
If that still doesn't work, feel free to call 1-800-937-8997 That is t-mo's cust care department, and ask for Tier 3 Data Support. That seems to be something around a bad gateway. but I'm not to sure. I think a trouble ticket would have to be filed and it advanced to ATSG...
On top of that, have them test the Internet2.voicestream.com, and internet3.voicestream.com provisionings on your account in what they call ihlr. also try to get them to do a cancel location.... have them re provision the acount (remove the apns and put them back), and maybe even remove the wap.voicestream.com and internetX.voicestream.com apns from the sim card and then resend the switch. that might work.
forewarn you they will go through these trouble shooting tips with you while you're on the phone. (the netsh commands)... but demand that they do the info above... and if you're still getting the HTTP Error, ask for a trouble ticket, now you will have to be on the phone and they do take a while, but it won't get filed unless you're on the phone with them. and the account HAS to be verified. so make sure you are either an Authorized User or the Account holder on the number you're calling about. Also make sure you're not on the device. they hate it, and it's against policy... They are an in bound call center and are unable to call customers back... but half the time they can't get through because they're number is blocked.

Related

Active sync 4.5.0 and Internet

Hey everyone I am really curious about how I need to go about accesing the internet throung the usb connection while my tilt is plugged in. I have read that previous versions of active sync had a feature called pass through which could be enabled / disabled at your choice. However in the current version of active sync this does not seem to be an option.
I basically just want to be able to browse the net on my tilt while I am connected to the pc via my usb cable.
Why because the at home internet connect is way better then the 3g network. This way I can download large files directly to my phone.
I have tried the registry edit as well as other methods. Still can't get the damn thing to work..
I am running the stock tilt rom directly from att. No mods no nothing. Also the version of active sync that I have came directly off the att tilt cd.
Please Help I appreciate your efforts in advance!
I have this workaround ( same situation with my X51V ) that you can try.
import the reg file or add the following key:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Most works out of the box ( internet while activesync ... not sure why yours don't ... could be something that you did ??
anyway ... try the reg import and report back
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
earthman5678 said:
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
Click to expand...
Click to collapse
when setting up activesync ... the last window allow you to enable WIFI while connected to USB too ( if prefered )
or go into ( File -->> Connection Settings ) and check "allow wireless connection on device while connected to desktop"
yeah tried the reg hack before. didn't change anything for me.
I also messed with the advanced network functionality box under start settings> connections> USB to PC.
No worky for me.
Is there anything else you guys have done on the phone? Should there be any other entries under network management? RIght now I have listed
Media Net
AT&T ISP
My Work Network
MY ISP
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
UnicornKaz said:
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
Click to expand...
Click to collapse
for real OH Jebus Hard reset. Just great. Well atleast i don't have too much on my phone.
Any other suggestions?
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Carty said:
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Click to expand...
Click to collapse
yeah my man did that as well... maybe I will try the hard reset and see what happens
ive been curious about this also. mine just seems to default to my 3g connection...do i have to disable this for it to use the active sync connection?
Nope. When Synced, ActiveSync' net is on first priority!
Regards,
Carty..
I wonder if you have the networks proxy set in your default internet connection and when you connect via as it cant see the proxy nd thus wont allow connection...
interesting i tried out the newest rom on kaiser upgrade section...the att rom. i was gettin the same behavior. i loved the rom but was only bugged by that. i went to a new rom and fixed that problem. something with how att handles activesync cant do the job.
And ATT use a proxy...
unwired4 said:
And ATT use a proxy...
Click to expand...
Click to collapse
i tried the diasable proxy cab flying around...it was no good. I'm using a different rom right now. It only happened to me on that specific rom.
I would have thought you just need to check the connection settings and make sure no proxy is enabled.
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
UnicornKaz said:
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
Click to expand...
Click to collapse
Nice I downloaded the cabs. But before I launched them I took a look at my tilt for another second.
Keep in mind that I just did a hard reset and this is a stock att ship ROM.
Under start> Programs>Tools> There is a icon called proxy manager.
I clicked on diable proxy and did a soft reset. The problem is now fixed. I can browse the net while connected via usb through pass Thru.
Maybe the cabs do not need to be downloaded afterall as att already has them installed but thank you for the lifesaver!
Thanks people!
Hi,
I also used proxy manager to disable the proxy. Now whenever i connect my phone with activesync, it keeps connecting to the phone's GPRS (mediaNet). i look under the connections icon and it shows medianet connected, but not activesync.
anyone know how i can fix this to return to normal? i tried enabling the proxy again, but no luck.
HI,
I think I need the opposite
At work there is a very restrictive proxy that allows pie connections but, for example, does not allow to update the weather in HTC HOME.
There is a WIFI nearby that allows it...
Now, what I would like is to have my device ActiveSync'ed (so contacts, and so on are OK) while using WIFI for ineternet access...
Anyone knows if it is possible and how?
Thanks

Activesync error 80072f7d

I am using Activesync 4.5.0 (Build 5096) on my WinXP laptop to sync the AT&T Tilt with my laptop and outlook exchange. I have no problem with Activesync over the cellular network or wifi, but when I connect the USB and it automatically launches Activesync on the laptop, I see this error on the PC side. Looks like it is able to sync everything except the Outlook data. I looked for this error code on Microsoft site, but I don't see much details about this error code. I have installed additional SSL certificates to see if that resolves the issue, but it didn't. I have had this issue from Day-1.
It is not an issue as long as I am in USA where I have cellular data service to get the emails/appointments/contacts into my phone over the cellular network. However, when I travel, I don't plan to pay for the exhorbitant roaming charges and so would like to use the USB link to sync the info.
Has anyone else faced this problem? Is there a solution?
I heard they had wifi overseas, too. Supposedly its not that exhorbitant, and possibly more convenient than keeping a laptop with you at all times to sync your PIM stuff.
I do carry a travel router with me everywhere with my laptop while on travel to create an instant wifi access point. However, if I am sitting in one of our offices and have a LAN connection to my laptop, I don't see why I can't get my USB connection to work. I am sure there are others who need to sync up Outlook while the phone is connected to the laptop for charging purpose.
Saw this on a site, might want to check it out:
http://devnote.stokemaster.com/2008/02/activesync-45-supportcode-85020006-and.html
" Support Code:80072f7d
Fixes:
Note that this involves registry changes so be careful with it.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
This site has the registry file that you can double click and modify.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
This disables the Layered Service Provider (LSP) that use the Windows TCP/IP stack. "
Don't know if that will work,but worth a try.
Make sure to export your original reg key first so if it doesn't help you can always change it back.
Alemaker
I tried the registry addition on the phone just now and then rebooted the phone. But, it didn't help. I have seen this discussion on pdaphone forum, but it is not clear whether it should be done on the phone or the PC side. Chris Herrera's site is also not very clear about it. The file has a .reg extension. Does the extension indicate where it should be run? I manually added the parameter on the phone.
hmm,
good question, and searching both my Vista laptop and my Tilt registry, didn't even come up with that key, but it may be making a new key.
If it didn't work on the phone,try the pc, and if it that doesn't help, was worth a shot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
The last suggestion fixed it for me.
The funny part is that this is a problem only on my work laptop. At home I have no issues.
Thanks
worked for me too
...but it didn't work with dutty's...using RynCpprV6 at the moment.
I think it is something to do with my work PC..
Just want to chime in and say this fixed the activesync error 80072f7d for me too!
(added HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\"AllowLSP"=dword:00000000, didn't reboot, and File/Connection Settings within ActiveSync changed from "Auto" to "The Internet")
Another thumbs up. Works a treat. Didn't even need to reboot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
Click to expand...
Click to collapse
Worked like a charm - thank you, kind sir!
Thank You!
Another fine service provided by the xda-developers forum! Problem solved!
Ditto!
Another fine service provided by the xda-developers forum! Problem solved!
Just wanted to chime in and say that this worked on my Rhodium too! Thanks Kaiser users!
Activesync error 80072F7D on Toshiba TG01 comes up when try to sync Toshiba TG01 with company's Exchange server
Solution;
Start>>Settings>>Connections>>USB to PC>>Uncheck box: "Enable advanced network functionality".
Sync'd up fine right after.

Problems with Activesync passthru internet

I have my PDA plugged into my PC at work and I have to use a proxy to get out to the internet. I am trying to figure out how to make this work.
I have added the registry entry on my PC.
I have set the connection settings in activesync including "This computer is connected to:" to all 3 options
I have tried to set up the proxy on my PDA
I have tried both WM6.0 and 6.1 ROMs
I have tried different radios
I have searched the Forums but if I missed something let me know
Any help would be great
dagentooboy said:
I have my PDA plugged into my PC at work and I have to use a proxy to get out to the internet. I am trying to figure out how to make this work.
I have added the registry entry on my PC.
I have set the connection settings in activesync including "This computer is connected to:" to all 3 options
I have tried to set up the proxy on my PDA
I have tried both WM6.0 and 6.1 ROMs
I have tried different radios
I have searched the Forums but if I missed something let me know
Any help would be great
Click to expand...
Click to collapse
Here is the solution:
Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services. Right-click on the value list
and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero.
Disconnect and connect your device and Pocket Internet Explorer (and all other
applications) will start working.
Could be
I'm not 100 % positive that this is the same issue you're having but I have a weird issue where my proxy from my work PC gets put on my phone regardless of what settings i tweak. My work blocks things like gmail and hotmail so whenever i try to access those on my phone it tries to put use my PC's internet and blocks it. If this is the issue you're having read my post#7 on this link.
http://forum.xda-developers.com/showthread.php?t=360268
This isn't obviously the easiest way to fix this but i tried EVERYTHING and finally find out how to fix it so i do it this way.
Hope this helps. Is this what is happening for you?
alaiwy said:
I'm not 100 % positive that this is the same issue you're having but I have a weird issue where my proxy from my work PC gets put on my phone regardless of what settings i tweak. My work blocks things like gmail and hotmail so whenever i try to access those on my phone it tries to put use my PC's internet and blocks it. If this is the issue you're having read my post#7 on this link.
http://forum.xda-developers.com/showthread.php?t=360268
This isn't obviously the easiest way to fix this but i tried EVERYTHING and finally find out how to fix it so i do it this way.
Hope this helps. Is this what is happening for you?
Click to expand...
Click to collapse
I already disabled the network functionality for activesync. I also did the registry update mentioned above. If I go to pocketIE it will act like it is trying to load then it will say "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later"
It seems like it goes to the DNS and gets the IP but from there it stops working.
Intranet sites work but not Internet sites. Any idea on the proxy settings?
So, are you trying to get your phone's internet source to work on your phone while connected to your PC? Or are you trying to get the internet FROM your PC to work ON your PPC?
I am trying to get the internet working from the pc to the pda.
I tried this ROM and it seems to be working now.
You still have to go into connections and set it to "my work network" and then edit it and add the proxy settings.
Thanks for the help.

webcamera plus 2.0

Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
2 things to check would b that the phone is set for advanced network functionality and also the same setting on pc's activesync. If not test ip address with ie? on pc to check for responce.
Also make sure you have the port settings right, and port forwarding may be needed (most likely will be). I'm using it and it works great.
um, try this:
if you're using it with wlm for example, start the webcam on the phone, and the annoying lil box will come up and it will look for an ip address, THEN send your webcam on wlm, nothing will happen...so cancel the webcam on the phone, (just press the action button to make the annoying lil box go away)....then try starting the webcam again, from your phone. it should then immediately find the ip address. it's really gay software!
hope this helps.
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
I bought the app last tuesday and after a few tries I deleted it......it's buggy as hell.,,,waste of money.
tfdeere said:
Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
First, ensure you've installed the desktop software correctly. It loads the video device driver so Webcamera Plus will show up as an available video device in capture programs. Also I'm assuming here that you've properly installed the latest application on your phone. If you haven't go to the Ateksoft website and get the latest version.
Next verify that you have a working Activesync connection between your PC and phone. Some have indicated it's necessary to disable advanced network capabilites in the "USB to PC" control panel (under Start > Settings > Connections). You're mileage may vary, and seems dependant the ROM. I'm running the Faria WM 6.1 and I don't even see this option and the program still works fine on my system. Now connect your Kaiser to your PC.
Now launch your video capture program, or chat program that uses a webcam, or whatever you'd like to use Webcamera Plus with. You should be able to choose your video source, and if you've installed the Webcamera Plus desktop software correctly you should see it as an available video source. Choose it.
Finally, start the Webcamera Plus application on your Kaiser. Go to Menu > Settings > Network. Check the box to "Autodetect IP". If you're going to use Activesync instead of a TCP/IP connection then this must be checked. Click "Done", and then "Start". You should be connected!
If not then check the firewall settings on your PC. Maybe reinitialize the capture device in whatever program you're using on your PC to view the Webcamera Plus image / video stream. Good luck!
kmorris89 said:
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
Click to expand...
Click to collapse
Your Kaiser is connected to your LAN via Wifi also, yes? In other words, both your laptop and your Kaiser are on the same network. If so, then you were on the right track setting up port forwarding to your laptop's IP address. If you have the right laptop IP address set in the Webcamera Plus software (on the phone), and the same port specified as you setup in your router, then it should work. If it doesn't then you may have a software firewall blocking your connection.
If you're phone is NOT connected to your LAN via Wifi then you're using the wrong IP address (192.168.2.6). You need to use your WAN IP, not your LAN IP, in the phone's Webcamera Plus network settings. If that doesn't work, and you're sure your router settings are correct, then you should probably take a close look at your firewall logs. Or try disabling it altogether for test purposes.
I ended up getting a different program which worked better, but the FPS was pretty crappy either way and the camera cut out every few seconds. Looking at actual webcam alternatives now instead of being cheap Thanks for your replies though, I appreciate it.
is this software freeware?
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
Click to expand...
Click to collapse
It expires after a few minutes you have to pay for the full version
I have Touch2 and Qtek 8310 (and Windows 7 32bit). I've install webcamera v2.1 and the problem is that it works with Qtek but not with htc touch2. Same settings on both phones but only with qtek i get image on skype and msn. Any ideas??? (qtek has WM 6.1 and touch WM 6.5)
web cam
where do u get this software from and can i use it on my handsets MSN? (tytn ii)

Using HTC as access point for iPod Touch

Edit: I got my help below, thanks guys !
I just got the HTC Diamond so I figured you guys might know the answer to this since I'm sure you know the thing inside and out.
Without actually trying it, does anyone know off hand if this would work. I'd like to be able to play with my iPod and access iTunes and such away from home (like at work, no wifi). I have an HTC Touch Diamond.. I'm not trying to turn it into a phone obviously, I'd just like internet access on my touch (iPod)
Thanks
Instructions to make the iPod a phone but I am thinking if it can connect to the phone, it should be able to get access..... yes?
http://www.youtubetoipod.biz/guide/turn-your-ipod-toucn-into-a-3g-iphone.html
This should only take about 10-15 minutes. If you have any problems at all, feel free to ask other users in this forum.
1) Setup the Windows phone as follows:
a) Go to settings/connections/wifi
b) Select the network adaptors tab, and select your Wifi card (should be obviously named)
c) Manualy set an IP address, lets use 192.168.1.1 Then click in netmask and let it auto-fill with 255.255.255.0
d) Go back to the Wireless tab, and select NEW network (make sure the option to show both fixed and adhoc networks is selected).
e) Name the network whatever you want. I called it 'iPod'. Then tick 'This is a device-to-device (adhoc)' option. Hit 'Next'
f) Turn off data encryption. You CAN use it, but it makes things more complex, and only 1 device can connect to this network anyway so nobody else will be able to use it.
g) Hit next and finish. You should see the network name appear with 'Connecting'. It will sit there untill you finish the client side before it says connected.
2) Configure the Internet connection sharing,
a) Run Internet sharing on your device, select 'Bluetooh PAN' and check the box below shows your GPRS data connection.
b) Open PHM Registry Editor and go to 'HKLM\Comm\ConnectionSharing\PrivateInterface=BTPAN1'
c) Change 'PrivateInterface=BTPAN1' to 'TIACXWLN1', Ok and save this. Exit the registry editor.
3) Configure the WiFi settings on your iPod/iPhone (these instructions are for iPod Touch. Presumably iPhone is the same or very similiar. Just let me know in the forum how you get on!)
a) From the home page tap 'Settings' then 'Wifi' then 'Turn on WiFi'.
b) Select your new 'iPod' network from the list. Wait a few seconds. It should connect.
c) Press the 'Home' button and open Safari. Go to a webpage. It should connect with no trouble. I occasionally got the message, 'Cannot connect to iPod'. Turning it off and on (rebooting) should fix this. If not, reboot the Windows phone also and start from scratch.
Click to expand...
Click to collapse
http://www.wmwifirouter.com/
Should do the trick.
intx said:
http://www.wmwifirouter.com/
Should do the trick.
Click to expand...
Click to collapse
+1 to this.
See, I knew I came here for a reason. That is awesome!!
Thank you so very much!!!

Categories

Resources