Related
having trouble getting my Pioneer AVIC D3 to connect with the bluetooth on my Tilt; the bluetooth audio works just fine, but i cannot make or recieve calls on the Navi system and its pissing me off. i already made sure the device is visible and bluetooth sharing is turned on (idk if i need it on but trying this anyways)
anyone else have a similar problem or a suggestion?
ugh, i want an AVIC so bad. but my truck is only 1.5 din. wold require a custom install
My silly thoughts:
1. Your Tilt doesn't need to be discoverable, you AVIC does.
2. If the AVIC doesn't show under settings-connections-bluetooth, then you haven't created a proper partnership.
3. If it does show there, then you should tap & hold that entry and see if you get "Set Headset" or "Set Handsfree". If you don't then the device isn't reporting a BT profile for phone use to the Tilt.
If you go through all of that and it doesn't work, I'd check with Pioneer for software/firmware upgrades for the AVIC. It may be an issue that they've fixed with updated code.
bump, tried the above with no luck. my sony S710a works fine and this is REALLY pissing me off; i spent almost $500 on the phone and another 1,000 on the damn navi system, if this doesnt work out soon im selling the Tilt and going back to the Sony
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
blackcracker said:
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
Click to expand...
Click to collapse
thanks im a member at avic411 as well as here and have had no success thus far; looks like SIM swapping with my Sony S710a is the best i can do. too bad because skipping songs or going thru my playlists via bluetooth is freakin sweet.
yah, i have the avic-d3 and the att/tilt, im so almost about to take the phone back. Even my crappy iphone paired withno issue. Please post if you figure it out.
Sad to see there has been no progress. I just got my new Kaiser, and I can only use it for bluetooth music and not as hands free with Avic D3. What a piss offf!!!!!!!!!!
I believe its a conflict with WM. I have the Pioneer 6800DVD and bt adapter and the same issue with my Treo 750 and Tilt.
I was able to get it to work on my treo using a bt program called jetware. I haven't tried it on my tilt yet. but it might work
I can confirm that the Jetware patch works great with my Tilt! You MUST uncheck bluetooth stereo (on your tilt) and only use the handsfree feature.
Hey guys
I have a Tilt and recently installed BTA so that I could channel music to my earpiece. I didnt like the sound quality so I uninstalled it. No I cant pair my bluetooth anymore. The two messages I always get is Problem with hardware, and bluetooth radio is turned off. I tried to pair a brand new bluetooth today, still no success. Perhaps one of my registry settings were changed. Please help.
from the sound of it, it looks like your are doing something wrong. are you sure you UNinstalled the BTA? because that message sounds its comming from that program
i'm sure i uninstalled it. Is there anyaway to reinstall original ATT tilt bluetooth radio? Thanks for your help...
Hi all, I have had this bug in varying flavours with both the Wizard and now the Kaiser.
If I make a call via Bluetooth (certain devices only e.g. JVC in car stereo), after the call, all audio is lost on the device when using the speaker, e.g. no ringtones, no TomTom voice guidance. (Oddly the touchtone sounds on the phone dialler continue to work.)
Making another call via Bluetooth works fine and all audio is heard, but not if calling via the earpiece of the phone - all phone audio is still muted. A reboot is required. (Even after a reboot, sometimes all audio is muted, and 2 or 3 reboots are required.)
It is like Bluetooth is 'stealing' the audio from the phone's speaker (which is should), but not giving it back at the end, however turning off Bluetooth doesn't return it.
It happens with WM6.x on the TyTN II.
If you can fix it either via a workaround (reboot the audio service after every call?) or a direct fix (HTC are useless and have not emailed me back), I will pledge you $100 via PayPal. I am sure others will join me in pledging an amount also.
Yes. I've seen the same thing with the last stock Tilt ROM, too.
Same here. But is not happening very often.
The other issue for me is if I have A2DP enable and listening to music, then making a phone call will drop the A2DP connection and I have to reconnect A2DP again. It happens to both my JVC car unit and Sony HBH DS220.
I tried that w/ Dutty's WM6.0 and the latest 6.1 rom
I have the same issue, with bluetooth disconnects.
Just staying on-topic here (you can solve A2DP issues with A2DPToggle a great free app), has anyone found a solution to this Bluetooth loss of speaker audio issue, or a workaround to avoid it happening?
Rebooting the phone after every Bluetooth phone call is hardly what I consider a high-end smartphone to require.
Same here
What Radio's are you guys running? (Ignore my signature for the moment, been phoneless and away from here for a while and just getting back up to date )
Haz
My current radio is 1.64.08.21.
I have also tried 1.64.06.04.
Could we be closer to finding the problem? Does the Radio contain the Bluetooth stack?
Here are all available Radios:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
I'm going to try 1.58.26.20 now. I suggest others try the other 1.5x variants and report back if any of them solve the bug.
Update: I am now offering $100 to anyone who can fix this - see 1st thread.
I have used Windows Mobile since the first ever SPV phone. This one issue is making me look seriously at abandoning that loyalty and getting a Blackberry. If I can fix this for $100 I could be tempted to stay however.
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
What bluetooth headset do you have? Have you tried other headsets or just the one you have? What version of 6.1 are you using?
Thanks, I'll give the audio toggle a go. Might need some help with Mortscript though
I am using the JVC KD-BT1 car stereo with Bluetooth in-car kit. However I can also lose audio on a clean boot even when not in the car, although that is very rare. When using it with the car stereo, it happens after almost every call.
I am running Sleuth's WM6.1 but the other people in this thread are using a variety of BT devices, ROMs, and HTC models.
Can anyone help with how to create a MortScript to run BTAudioOff.exe after each phone call?
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Kraize92 said:
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Click to expand...
Click to collapse
Thanks, I'll try that too.
Rumball said:
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
Click to expand...
Click to collapse
Okay I tried this and before I even got in the car, chose to turn Bluetooth Audio off using the toggle. Since then I cannot recreate the issue! I am not having to toggle after every call, I only did it once and the problem won't come back!
Fingers crossed...
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Kraize92 said:
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Click to expand...
Click to collapse
The issue is there is no audio coming from either the phone or the Bluetooth device. I hear the Bluetooth device disconnect, and its display shows that it has also.
I see no 'Stereo' option to untick for the JVC in its Bluetooth settings, only Hands-free and Wireless Stereo (already unticked).
No progress
Okay, this is seriously getting me down now It all sounded so promising. I have tried the following:
Flashed Niki Radio 1.58.21.23
Tried using Bluetooth Toggle - it seemed to work once when I turned BT off before connecting, but after a reboot the problem is back
Tried a HFP extension PM'd to me (thanks anyway - didn't help)
Made sure Bluetooth Stereo is unticked in the JVC's settings on the phone
I am not sure if the problem is worse when taking a call as TomTom is running.
Here is an interesting development which might help someone narrow down the cause:
I make a few calls, and as always audio is lost, even for phone calls sometimes.
Touchtones on the keypad are the only sound that the phone continues to emit itself. Everything else (TomTom, ringtones, etc.) is dead.
I then go into the JVC's A2DP mode and 'Connect'. The icon appears on the mobile's title bar, and I can hear phone audio through the car stereo.
I 'Disconnect' and the phone's audio is still lost.
What this tells us is that the phone is putting out sound, just not through the speaker.
If someone can write something that will reset the speaker driver after a call, my offer for $100 still stands.
Just to update this, the issue still exists with a clean install of HTC's new 2-May-08 WM6.1 ROM from their website. To***rs!
CJSnet,
Since we got the similar setup w/ exact the same issue (Att Tilt w/ JVC BT-1), I think the problem is basically Kaiser does not switch back to A2DP profile properly after headset profile from phone call. The same issue happens to my Sony HBH DS-220 stereo headset too.
I tried my Eten M600 w/ JVC BT-1 and does not see this problem
Hi there. I was wondering if anyone could help me with an issue I am having after my 1.5 update (non-rooted). After my update I played around with it for a bit and love it but I went to play with my bluetooth and I can't listen to music through the headset like it said it was suppose to do. I get a ringing noise when someone calls but no music thru it. Did I do something wrong with the manual update or something? If someone could help me I would truly appreciate it.
Also I was curious if its possible if I can root my phone after the update or is it not an option anymore? I been thinking bout it now and is loving the cool themes you can get.
Thank you so much for your time
i to have this problem from time to time
i manage to fix the problem temporary by going to the phone's settings > Wireless controls > Bluetooth settings > klick and hold the bluetooth device till a popup comes > Options > then toggle media off and on
then my headset works out fine
ps: i just repaired my headset as a test, witch i dint do after the update and it seems to work after turning off bluetooth and the device
ill give u an update if it works after a couple of times
Thanks for responding. I have tried for 2 days now to try to get it to work and I haven't gotten it to work yet. I kept my music running while trying to disconnect and reconnect the headset (motorola H690) and nothing and then earlier I got a phone call while I was listening to my music off my phone and I got a phone call and I answered it via bluetooth and when I got off the phone I could hear the music for a couple seconds and it shut off and started playing on the phone speaker. I don't know what the deal is.
i to still have that problem
i can start and stop the media from my bluetooth device but it will play on my phone
still when i toggle media off and on in the bluetooth device options it fixes it sometimes for 3 connects sometimes till the next session
what happens if u toggle media off and on with ure G1?
Yeah it still hasn't worked for me and I've done the same things you havei don't know what the deal is.
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Exactly the same issue as i3lazen
My phone is totally standard running 1.5, just about to go and sell the phone and go back to my HTC Kaiser as it works with no issue.
I can stream music to my BT car stereo no problem but if I can't send and recieve calls then I'm stuffed.
If anyone has any advice, it would be appreciated as I'd love to keep my G1
Hey guys,
try the fix here: http://forum.xda-developers.com/showpost.php?p=4177831&postcount=329
Thanks for the link but is that not just for improving sound quality and not a BT fix?
i3lazen said:
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Click to expand...
Click to collapse
I had this issue with my rooted phone, and then I updated the radio to 2.22.19.26I and this fixed it. Not sure if this is related to the non root phones but it may be related to it if the radio wasn't updated in the upgrade to 1.5
ashleyglassel said:
I updated the radio to 2.22.19.26I and this fixed it.
Click to expand...
Click to collapse
I've got that radio on my non rooted phone but still have the BT issue
This is my first, and only a minor, contribution to the forum; I've been a feeder up till now.
I bought a cheap bluetooth headset for my HD2 for use with my motorcycle satnav and also my HD2 - not that I want to take calls whilst I'm riding, but playing music would be a possibility. It was similar to this:
http://cgi.ebay.co.uk/Bluetooth-V2-...e_Phones_Bluetooth_Acc_ET?hash=item3efab16de4
I paired it with my satnav and could hear voice commands and music as expected. I then paired it with my HD2 and could only get calls, no music playing!!!
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
There were three devices paired (HD2, satnav and my car) so next I had to work out which one. I found that if you look at the nickname for each one, it's decoded into english by the Reg Editor (I use CERegistryEditor). Using trial and error I found that changing the setting "Hideconnections" from "0" to "1" did the trick. I can now hear music through the headset!!!
Well chuffed with myself!!!
PS Perform a soft reset after changing it to lock it in otherwise it resets to "0" after a disconnect.
OOPS! because I was looking for Bluetooth stuff I posted this in the wrong area, sorry!!! Maybe a moderator can correct please?
How bizarre it works by default for me......well done on the find though
Thanks...
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
All I can suggest is that - like I did - compare settings with something that does work. Maybe because you have a mono headset (mine is stereo) it's not capable of receiving music?
Hi
I could play music and receive system sound in my Jabra mono bluetooth earpiece if, in HD2, I go bluetooth->advance->Audio and check "play system sounds on remote hands-free device". However, after a phone call, the music and sound will be routed back to the phone speaker, though the earpiece is still connected (you can still make/receive phone calls through the earpiece).
The music and sound can only be routed to the earpiece again after a soft reset.
The other observation is that, if there is pause in between music or sound for a period of about 12 to 15 seconds, the HD2 will "suspend" the bluetooth transmission (beep in the earpiece) and resuming the music will cause the bluetooth transmission to be re-established (beep sound in earpiece). This is causing skipping of the first 1 to 2 second of the music / sound.
Have installed BTaudio V1.0. It is working on my HD2 and will keep the transmission constant and no skipping problem.
However, also needing soft reset after phone call.
Does any one has similar experience ? Is this earpiece/ head set related of is this HD2 related issue ?
No one has simialr experience ? Is there a thread on bluetooth related registry tweaks, I have been searching for it but don't seems to be able to find one. Any help will be appreciated.
anzudragon said:
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
Click to expand...
Click to collapse
+1 as well
I have a Samsung WEP420 mono bluetooth and no success either.
Armes said:
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
Click to expand...
Click to collapse
I don't have that reg key at all! I have a dutch hd2 running stock 1.66. When I try to connect to a parrot party bluetooth stereo box this (most of the time) doesn't work. Once or twice I established a working connection but after trying multiple times with no luck I decided to find a fix for my problem. Now I try to edit my reg with this and it's not there!?
i paired the hd2 with the car kit parrot ck3100... leaving apart that it doesn't connect always... although i have checked in settings to play all phone sounds through BT it doesn't...
i think it's a BT problem of the hd2, or maybe all WM phones... 'cause ițve had issues like this before...
P.S. once it played the music thorugh the car kit... just like this...