Database Develop

How can i format Diamond?

Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::

dont the manual spc how a hardreset is performed ?

Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.

download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory

Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.

rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right

what combination did you do to get to bootloader? just so we all know
im glad to help
Rory

rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.

go to bootloader is:
hold down button and press (red) reset button

Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse

I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.

Bootloader Problems

Please help I cant get my xperia into bootloader.
I've tried volume down and power technique, but to no avail.
Any suggestions? as I'm fed up of this damn o2 ROM.
Thankyou

did you turn-off your phone first?
again, turn-off the phone,
press and hold the down sound button,
press and hold the power button until the multi-color screen appear.

yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help

You must to press for long time,Until Tree-color screen to appear..

hirst89 said:
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
Click to expand...
Click to collapse
I dont know if theres other way to enter bootloader mode in x1...
try to search...
or maybe you can try hardspl again.

try two thinks please:
ONE:
turn of your pda by holding long time power on/off until a message comes and ask you "turning of?" (i write the short version).
than try bootlader-modus by 1. press volume down and hold 2. press power on/off and hold.
dont shocking by vibration - hold both buttons until bootloader comes.
TWO:
your pda is quite normal?
than you dont need make finger-gym. open X1_HardSPL.exe and wait two or three seconds. it extracts some files. one of this is "EnterBootloader.exe"
copy this with usb/activesync or flashcard to root of your pda. go with fileexplorer (pda) to root and klicki-micki and you straight fly to bootloader-mode.

okokur said:
your pda is quite normal?
than you dont need make finger-gym.
Click to expand...
Click to collapse
Love it!
But yes, make sure you done hardspl first. then power off phone then hold volume down and power do not let go of buttons until multicolour screen appears.
Tin.

TBH you don't need to hardspl to get to the tri-color bootscreen, just to flash with custom roms.
And if nothing works, remove and reinsert the battery then hold power+volume-down key until it vibrates and let them go when the screen shows up.

try taking the battery out first, then putting the battery back in. make sure that the phone is NOT connected via usb cable, or else it will automatically turn back on.
then use the power and lower volume key to enter bootloader mode.

I can not make hard reset :(

Help me please guys I can not make a hard reset or flash a new ROM with the sd card method. (right volume button and power button). also hard reset doesn't work. (press both silver button and power button).
before always its OK but now i only flash with usb method.
thanks a lot

Can you still hard reset using |START|SETTINGS|SYSTEM|CLEAR STORAGE|?
What rom and SPL are you using?
You might need to Hard-SPL again.

I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz

the banished said:
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
Click to expand...
Click to collapse
Are your xperia volume keys working properly because it can be hardware issue....

To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.

Fulgore69 said:
Are your xperia volume keys working properly because it can be hardware issue....
Click to expand...
Click to collapse
I test de volume keys and work fine

the banished said:
I test de volume keys and work fine
Click to expand...
Click to collapse
Are you using volume down?
Turn the phone off, hold volume down (and keep holding) then turn the phone on. Make sure it isn't connected to your PC when doing this.
Edit: Does it enter the bootloader correctly when you are using the Rom Update Utility?

jhendra said:
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Click to expand...
Click to collapse
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks

the banished said:
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
Click to expand...
Click to collapse
Flash back to an earlier rom, HardSPL again and see if you can enter the bootloader and hard reset using the key combinations.

Whats ROM recommend me for this problem Buzz

the banished said:
Whats ROM recommend me for this problem Buzz
Click to expand...
Click to collapse
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.

buzz83 said:
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
Click to expand...
Click to collapse
Great info thanks I will Read

Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??

the thing is:
if you want to go into the bootloader you need to press and hold the power button and the volume button down untill you get into the 3coloured screen.

exactly thats is all i want but a can't
all The keys (Volumen, Power, silver keys) Works Fine in Windows Mobile. but i can not make hard reset with the silver keys and button power. or worse i can not enter to the bootloader mode with volume key and power key.
before all its ok but now its like the keys dont work at the start.

to do a hard reset I just keep holding both softkeys and then I press the reset button with the stylus.
try it this way.

the banished said:
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
Click to expand...
Click to collapse
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.

buzz83 said:
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
Click to expand...
Click to collapse
I think the same. I try to search and Search but my english i not the best and is a double job. jeje.
Thanks a lot for the help Buzz I keep search any solution.
And as they say in Spanish forums if you dont find the the answers in XDA you dont find on any page

Hardspl which version do I have?

I think I have just flashed my phone with hardspl 3.56, how do I check which version is currently on. Reason being the flash was very quick, it went from 0% to 100% in a flash.

Get into bootloader, hold camera button in "keeping hold" press reset whole and keep held and it will display Hard-SPL.

stylez said:
Get into bootloader, hold camera button in "keeping hold" press reset whole and keep held and it will display Hard-SPL.
Click to expand...
Click to collapse
Bingo! that worked a treat and it had flashed, Thankyou.

[SOLVED]Help! Cant do Hard Reset(Format)

Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?

cell surgeon said:
Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?
Click to expand...
Click to collapse
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device

Hold Vol Up + Down and press the power button once (do not continue holding the power button). Continue holding vol up + down and it should get u where u want to go. Worked for me.

Fallen Spartan said:
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device
Click to expand...
Click to collapse
It was mentioned to format once or twice in the rom thread,
Thanks for your idea it solved my problem i can able to format now, i was such a noob trying holding even the power button instead of pressing it (very shortly) Once, it was not mentioned in any of the thread i googled.
Yes i searched but no 'clear storage' option in this rom must be fixed in feature.

Glad you got this sorted.
MOD EDIT - Thread closed as solution found