Hi does someone has a solution for the follwing?
I use my Kaiser with Exchange server 2003 and direct push.
Because of that, i have to use the securety pin code on my Kaiser.
When i am using Tomtom now, every 15mins the enter pin screen pops up, and i have to enter my pincode in order to resume navigation...
Is there a way around this???
I believe there is an topic for this problem.
You have to change a registry key.
Don't know wich one that was.
If i find it, i will post it here.
Here it is:
Enable changing password lock time:
In the registry do the following:
\hklm\security\policies\policies\00001023 from 0 to 1.
coolhead said:
I believe there is an topic for this problem.
You have to change a registry key.
Don't know wich one that was.
If i find it, i will post it here.
Here it is:
Enable changing password lock time:
In the registry do the following:
\hklm\security\policies\policies\00001023 from 0 to 1.
Click to expand...
Click to collapse
I did try that. It does work for about 2 days. Then the password screen pops up again.
Also the regkey has automaticly gone back to 0...
Then i think the exchange policy is overruling the device.
I'am sorry then i haven't got an other idea
Related
Ok I have searched and not run across anything without reading every thread in here.
How do I change my default input method from keyboard to letter recognizer and MAKE it stick.
I change it i the input menu and reg edits but every time I soft reset it is back.
...we're on the same boat :?
Join the club!
I'm after the phone pad so I can still use the 8125/Wiz screen as a normal phone keypad at times and not have to whip out the stylus.
whatever you do, dont use registry wizard to set it... I white screened a week ago doing that, hard reset
hope to find a solution
Perhaps this:
HKCU\ControlPanel\SIP
DefaultIM {42429667-.... or one of the others {42429690- {42429691-
Look in the neighborhoud HKCR\CLSID\{424296...... for the others.
Cheers
edit: In case it wasn't clear you need to fill in the whole CLSID in the DefaultIM string value. So {42429667- including the } at the end.
It should work after a soft reset (gone with a hard reset)
Any Solutions to this yet?
Thanks
Jules
I'm joining the club too
I'm on a Charmer, I used to able to change the Letter Reg SIP as default before I upgraded my ROM. I thought I'm the only one.
i'm triing to change the reg value with total commander and with wizard reg but after a restart the phone hang on white screen... someone can help me?
i want to use nullkb as default probably is not possible?
jmel said:
whatever you do, dont use registry wizard to set it... I white screened a week ago doing that, hard reset
Click to expand...
Click to collapse
hrm.....
dromico said:
i'm triing to change the reg value with total commander and with wizard reg but after a restart the phone hang on white screen... someone can help me?
i want to use nullkb as default probably is not possible?
Click to expand...
Click to collapse
cant say i didnt warn you?
jmel said:
cant say i didnt warn you?
Click to expand...
Click to collapse
yes but i make a hard reset after the first try (manually change registry with tcmd) and i try in another way...white screen in every try
lost in translation...
I was saying that if you TRY to use registry wizard to set it, you will get a white screen, and be left having to HARD RESET....
Not the best solution, but perhaps you could use my program SwitchSip to change the SIP on every soft reset. I don't know if it'll stick though, I've never tried...
V
http://forum.xda-developers.com/vie...&postdays=0&postorder=asc&highlight=sipswitch
thanks i try with your program, i never search the forum enough if i don't found your post.
i don't know why there is no possiblity to change default IM in the WM configuration.
Everything is listed here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other "Set default SIP"
tweakradje said:
Everything is listed here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other "Set default SIP"
Click to expand...
Click to collapse
I think we've all tried the method. Read the posts above carefully.
Just as a problem recap: the default SIP reghack no longer works on AKU2 ROMS. The kbd default occurs after a soft reset no matter what you have changed the registry value to.
I'm working on this one too. I coded up a program that quickly set the SIP to block recognizer and exited figuring I could just add it to the startup programs folder to switch over after a soft reset.
However, while this program works just great normally, it doesn't change the SIP when run at startup. I am working on why this is, currently. So far I've determined that my program is able to find the block recognizer SIP so the SIP dll is loaded. Tomorrow I may get a few more minutes to work on it. I'll code my program to check to see if it correctly set the SIP to block recognizer and re-attempt to change until it's successful. I'm guessing that this will have no effect on the issue since my current working theory is that the kbd default is set sometime after the startup programs run.
Guys, I don't know whether my app worked or not, but this post:
http://forum.xda-developers.com/viewtopic.php?p=317635#317635
seems to suggest it did. I don't have a wizard to test it on though
V
@vijay555:
I've got my little app set up on my today screen so I can just tap it quickly after everything's loaded to change my sip but it won't work if I drop it into my startup folder.
Perhaps this is what the poster you refer to is doing? Does your program check the default SIP using SipGetCurrentIM after you switch to see if the operation worked? Or do you just check for an error code after calling SipSetCurrentIM. Me, I'm just checking for an error currently and am not getting one.
Sleuth255: I really can't remember how I did it, I wrote it in c++ before I could program in c++, somehow. I'm on a promise to rewrite it sometime, and turn it into VJSipSwitch, for now it's merely a bastard child.
However, despite this, it's also designed to be configured as a shortcut to be launched from a hardware key or shortcut... if it becomes an issue, I'll look over the code again.
V
Hello all!
I have a question about some issues I am having and I am wondering if they are common and can be fixed or I am making a mountain out of a mole hill.
I am running Dutty's DualTouch Rom v4 (which is awesome BTW) on a AT&T Tilt
but I have some issues I am running into:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
3. Touch FLO is always different, if I swipe left I will get contacts. If I swipe left again I might get contacts but I might get something else, I have tried it many times and almost every time its different. Is there a way to make it so whenever I swipe left it always beings up the same thing?
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Thanks!
mlabate said:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
Click to expand...
Click to collapse
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
mlabate said:
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
Click to expand...
Click to collapse
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
mlabate said:
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Click to expand...
Click to collapse
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
DarkDvr said:
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
Click to expand...
Click to collapse
I had that saved from before (keyboard fix) I ran it once then I re-flashed and forgot to do it again, I thought that was only good if your keyboard didn't respond to anything at all, I didn't know it helped for that also. I guess I missed KaiserTweak, I will give it a shot.
KaiserTweak has Tilt keyboard fix as far as I remember.
Besides that, there is a Tilt keyboard fix.cab which solves exatcly that - improper key assignment..
I hope you flashed hard spl before you flashed dutty's rom anyway...
Yeah I did use HardSPL and it was successful.
I understand what it does, but once I flashed to dutty's wouldn't it not matter anymore? Or is there a reason done the road that I need it?
Thanks
Hi does someone has a solution for the follwing?
I use my Kaiser with Exchange server 2003 and direct push.
Because of that, i have to use the securety pin code on my Kaiser.
When i am using Tomtom now, every 15mins the enter pin screen pops up, and i have to enter my pincode in order to resume navigation...
Is there a way around this???
hi, to deactivate the pin code make the following:
change the registry key
HKLM\Security\Policies\Policies\"00001023“
from "0" to "1".
it should work now.
Thanks
ap0ll0 said:
hi, to deactivate the pin code make the following:
change the registry key
HKLM\Security\Policies\Policies\"00001023“
from "0" to "1".
it should work now.
Click to expand...
Click to collapse
That's it!
Thanks a lot
I forget password program s2u2.
can you help me.
now I cannot use htc 3450 for setting anything.
You're either going to have to connect to activesync>navigate to \Windows\Start up and take out S2U2.lnk or hard reset.
Well if all else fails, sorry to say, you'll have to do a hard reset...
Registry Editing is the order of the day
HKCU\Software\A_C\S2U2
Change the value for PasswordLock to "00", this will turn off the password prompt for S2U
Hi all I am new here due to first time with such an advanced function phone.
I have done a search in this forum ( Topaz only ) and came up nothing with quite the same problem I am having
I have a TD2/Topaz
I have lock unlock problem which I can seem to work out.
In Start/Settings/All Settings/Personal-Tab/lock
I utilised it to lock using a password, the phone is asking for the password every 30 seconds ( if unused ) even after entering the password.
Dose any body know how I can turn lock off ??
cheers in advance
porridge said:
Hi all I am new here due to first time with such an advanced function phone.
I have done a search in this forum ( Topaz only ) and came up nothing with quite the same problem I am having
I have a TD2/Topaz
I have lock unlock problem which I can seem to work out.
In Start/Settings/All Settings/Personal-Tab/lock
I utilised it to lock using a password, the phone is asking for the password every 30 seconds ( if unused ) even after entering the password.
Dose any body know how I can turn lock off ??
cheers in advance
Click to expand...
Click to collapse
The same way as it was locked. But don't have phone in hands right now,but try to go to the power settings and there should be an option "ask code on wake up" or something simmilar...
go to same place that you set lock, remove the tick of "Prompt if device unused for" and click "ok"
sIiiS said:
go to same place that you set lock, remove the tick of "Prompt if device unused for" and click "ok"
Click to expand...
Click to collapse
When i went back to Lock, I could not find my way back to that screen where you tick and make your password, ounce I had made the password I could not find my way back to this screen what do I press to get back to that screen.
Sorry for newbie type ??
cheers
Just to confirm that prridge is right... access to lock settings are curiously removed once lock is set. I think a hard reset is the way to go or you could also try 3rd party software.
Naughty WinMo 6.1
EDIT Ok this is weird: I pulled the stylus out as I was unlocking immediately after setting "lock" in "personal settings" and suddenly the settings appeared for the first time allowing changes... bizarre but true
Tony
Sorry folks, but seems lot of people do not even try to read out device manual.
http://www.htc.com/europe/faq_detail.aspx?p_id=249&act=um
According this thread, there are no problem to turn off Lock option or to change Lock time.
Take Start > Settings > All settings ... Personal tab ... Lock