Database Develop

Band switcher

I am looking for a quick and easy way to switch from 3G to Edge (Yes I have a Tilt on AT&T) from the today screen so that I can conserve battery life most of the time but get to 3G quickly.
I thought that phoneAlarm could do it by profile but it doesn't.
Freeware would be great since I am not looking for anything profile, time or location based but at the point I am open to whatever.

See http://forum.xda-developers.com/showthread.php?t=317982
(explicitly linked from the Wiki at http://wiki.xda-developers.com/inde...(GPRS & EDGE) modes to optimize battery life! )

Menneisyys said:
See http://forum.xda-developers.com/showthread.php?t=317982
(explicitly linked from the Wiki at http://wiki.xda-developers.com/inde...(GPRS & EDGE) modes to optimize battery life! )
Click to expand...
Click to collapse
Thank you sir.. I have been on the board for too long trying to figure out some flashing things and got lazy.
I have working this issue from the phoneAlarm end as well since it seems to have decided to stop working on me for some reason
http://www.pocketmax.net/smf/index.php?topic=5374.msg37434#msg37434
Have a great weekend!

I did some more testing and the plot thickens (or at least becomes more complicated) I read here that the Tilt changes bands differently than other WM6 phones (although I have not yet figured out how) so I think that may be part of the problem.
I flashed _Alex_ ' s ultra clean ROM and the only thing I installed was phoneAlarm. The phone was connected to MEdia Net in 3G. When I switched to a profile that did not have 3G (selected as GSM in the options) the connection disconnected and reconnected, but it remained 3G.
The same was true in reverse if I selected a GSM profile and reset it would start is EDGE. If I changed it to 3G profile it would disconnect, reconnect and stay EDGE.
I started checking the comm manager (I am using a 10 button comm manager) and the 3G selector would change with the profile although the band switch would not occur.
What is funny is that if I used the 3G selector on the comm manager the band switched with no problem, following the same behavior patter of disconnecting and reconnecting.
I don't know enough to really dig in any further but I will keep googling how the Tilt changes bands and hopefully one of the more technically adept folks will have something figured out or can give me an assist.

dcdivenut said:
I am looking for a quick and easy way to switch from 3G to Edge (Yes I have a Tilt on AT&T) from the today screen so that I can conserve battery life most of the time but get to 3G quickly.
Click to expand...
Click to collapse
3G and edge use the exact transmitted power! (Always on connection is the main problem!) An Ipod uses Edge which is slow. But what the hey, you have a question and it will be answered here...

Farsquidge said:
3G and edge use the exact transmitted power! (Always on connection is the main problem!) But what the hey, you have a question and it will be answered here...
Click to expand...
Click to collapse
That is interesting, because I get significant improvements in battery life if I spend the day on EDGE vs 3G. In fact, my battery rarely lasts more than 3/4 of a day with light phone usage if I am on 3G! This experience would see to be pretty common and I have even seen something that says 3G uses up to 4 times as much power as EDGE. This was supposedly the reason why Apple made the iPhone EDGE not 3G.
I am not bashing you and there may some electrical engineering reason why they use the same transmitted power but real life this translates into something different.

dcdivenut said:
This was supposedly the reason why Apple made the iPhone EDGE not 3G.
Click to expand...
Click to collapse
That does it!!! I'm finished...

One of the 10 key Comm Managers works. I don't recall what thread I got it in but it works fine for me.

HTC changed the old way to change the band in tilt. Now It isnt enought to change a registry key and reset the radio device. Now are needed dark and undocumented api calls to htc libraries. Bandswitch and commmgrpro(bandswitch + profiles) do it correctly.
Dani

danielherrero said:
HTC changed the old way to change the band in tilt. Now It isnt enought to change a registry key and reset the radio device. Now are needed dark and undocumented api calls to htc libraries. Bandswitch and commmgrpro(bandswitch + profiles) do it correctly.
Dani
Click to expand...
Click to collapse
Thanks - I will pass this along to Bruce, who is the phonealarm creator, and is trying to fix this in his next release. Another reason I love the product!!!
Shameless plug for them but it really is an awesome product and the support is great! Worth every freakin' penny!

Farsquidge said:
3G and edge use the exact transmitted power! (Always on connection is the main problem!) An Ipod uses Edge which is slow. But what the hey, you have a question and it will be answered here...
Click to expand...
Click to collapse
Uh, you wanna cite your source for that one?

I think HTC have been changing things again as my new Touch Dual, with latest bandswitch does not swap, it will allow the change and it even shows it in the system settings, but remains on 3G

A little divergent from the main topic thread, but:
dcdivenut said:
This was supposedly the reason why Apple made the iPhone EDGE not 3G.
Click to expand...
Click to collapse
If Apple could have made it 3G they would have. Steve Jobs was quoted in an interview that the reason the iPhone was not released with 3G originally was that the hardware to make it 3G was not out long enough to be tested thoroughly at the time the phone was being built and tested, not the time it was released. Once the decision was made to go Edge, Apple couldn't release a much better phone within a quarter or two so the incentive to get it out sooner went away. I have it on good authority (rumors in the media also confirm this) that the 3G iPhone will be released Q2/Q3 in 2008. Also, given the popularity of the iPhone and Cingular's small but growing 3G network at the time of release, Cingular was concerned that not everyone that bought an iPhone would have been in 3G areas and would have complained about performance. This is why Cingular has seemingly accelerated the roll-out of 3G-ready areas faster over the last few quarters. This comes from a few friends at Cingular.
If a new 3G iPhone will have battery life as long as the current Edge iPhone (removable battery would be the bomb to carry an extra one or extra capacity, it will be a very compelling unit, despite the inability to add 3rd party apps. And to bring this full circle to the thread, if a 3G iPhone allows 3G to be turned on/off, look out Windows mobile....oh, and removable storage capacity, too, and GPS..., and a good IM program...

Try these Comm Managers. They both work perfectly fine on my tilt.

None of these work on the Dual as it moans about permissions when installing.

rolandrat said:
None of these work on the Dual as it moans about permissions when installing.
Click to expand...
Click to collapse
Go to Settings>System> Memory>Running Programs and Stop the Comm Manager application. Then install the Comm Manager.
That should do the trick.

GarJones27 said:
Try these Comm Managers. They both work perfectly fine on my tilt.
Click to expand...
Click to collapse
I am currently using the dutty black 3G and that works perfectly. What I have done is link comm manager to a button so I can access it quickly and switch as needed. Changing comm managers does not address the phoneAlarm issue since phoneAlarm changes reg keys (according to Bruce) and with the Tilt (and maybe the Kaiser) it takes "api calls" or something else I don't fully understand.
If there is anyone who knows how this works and would be willing to share with Bruce over at pocketMax so he can build this into a update release that would be awesome!

GarJones27 said:
Go to Settings>System> Memory>Running Programs and Stop the Comm Manager application. Then install the Comm Manager.
That should do the trick.
Click to expand...
Click to collapse
Stopping everything and install worked thanks.

Separate radio for 3G?

Are there two physical radios in the Tilt/TyTN II? I ask because I'm experiencing a strange problem that nobody else seems to have seen before. That, or nobody noticed my posts here:
http://forum.xda-developers.com/showthread.php?t=335096
The problem is that phone/data work fine when the phone is in non-3G mode. (In the Comm Manager, available in most recent ROMs, I have disabled the 3G mode, so I'm using only GSM here in the US).
In 3G mode, I'll get a 3G icon (used to get an H, months ago), but will be unable to place/receive calls, and no data connections will be established -- they'll all time out or say that "the answering modem has disconnected."
So, back to my question: is it possible that my radio is partly damaged? Can that happen? I'm not sure how else to explain the utter lack of 3G on my phone.

can't have a damaged radio, you could have the wrong radio for the device and/or version of windows mobile. 3g only works if in 3g area,have it enabled and turned on through comm manager.also make sure you're network settings are correct and make sure phone is set to auto in networks tab in phone settings,not set to gsm/cdma
PS, the search tool/wiki are you're friends since this has been covered too many times

dyetheskin said:
can't have a damaged radio, you could have the wrong radio for the device and/or version of windows mobile. 3g only works if in 3g area,have it enabled and turned on through comm manager.also make sure you're network settings are correct and make sure phone is set to auto in networks tab in phone settings,not set to gsm/cdma
PS, the search tool/wiki are you're friends since this has been covered too many times
Click to expand...
Click to collapse
Thanks for the advice. Unfortunately, I've tried everything I can think of, and everything suggested. Nearly ever ROM I've seen, with nearly every radio; every combination of wap.cingular, isp.cingular, etc. The AT&T store thinks the phone is defective b/c they can't figure it out, either. In response to your comments: tried every version of windows mobile and most of the radios available; I'm very much in a HSDPA 3G area (used to get 5 bars "H" all the time); 3G is enabled; network settings are correct; phone is set to auto/auto.
Any other ideas, anyone? I appreciate it!

I've been have the same exact problem. I posted about it about a month and a half ago, but got nothing.
Everything worked perfectly until one day, out of nowhere, 3G stopped working for me. I've also tried multiple radios and ROMs and to no avail. The weird thing is that when it stopped working, nothing had been changed in months.
I know that I'm definitely in a 3G coverage area because I used to get 3G service all the time.
If I turn 3G on, it'll work in an edge only area, but as soon as it switches over to WCDMA, the problems occur.
This is super aggravating.

AndyNJ said:
I've been have the same exact problem. I posted about it about a month and a half ago, but got nothing.
Everything worked perfectly until one day, out of nowhere, 3G stopped working for me. I've also tried multiple radios and ROMs and to no avail. The weird thing is that when it stopped working, nothing had been changed in months.
I know that I'm definitely in a 3G coverage area because I used to get 3G service all the time.
If I turn 3G on, it'll work in an edge only area, but as soon as it switches over to WCDMA, the problems occur.
This is super aggravating.
Click to expand...
Click to collapse
Well, the good part is, you're not alone. I found another forum online (can't remember where, I'm at work now and I found it last night) were several people were having the exact same problem -- in various countries around the world, including the US.
They had decent luck flashing the stock HTC ROM and then the French radio mentioned on the big XDA radio post (search google for "kaiser radio" and you should see it). However, I did the same and still have the 3G problem.

did you try using a shipped att rom and see if you still have this problem? if the problem goes away, then maybe its just a rom/radio mismatch problem. if it doesnt, then its more likely a hardware failure.

I'm in france, and since few days, i've the same problem, and i haven't change the radio. the phone is going for repair.
link to my post

XtreMe_G said:
did you try using a shipped att rom and see if you still have this problem? if the problem goes away, then maybe its just a rom/radio mismatch problem. if it doesnt, then its more likely a hardware failure.
Click to expand...
Click to collapse
Yep -- I've tried going all the way back to the original ROM and radio. No go.

yeantbron said:
I'm in france, and since few days, i've the same problem, and i haven't change the radio. the phone is going for repair.
link to my post
Click to expand...
Click to collapse
Can you keep us posted on what happens when it comes back? If it's really a hardware problem, many inquiring minds would love to know.
Bonne chance!

chaosniner said:
Are there two physical radios in the Tilt/TyTN II? I ask because I'm experiencing a strange problem that nobody else seems to have seen before. That, or nobody noticed my posts here:
Click to expand...
Click to collapse
As mentioned in this thread, some shipments of the TyTN II have faulty hardware with broken 3G support.
No patch or driver update can fix this because it is a hardware problem. I experienced exactly the same issue with my first TyTN II and finally replaced it with a new device which works flawlessly out of the box.
I believe you should also better get your device replaced if you ever want to use 3G.

Can you keep us posted on what happens when it comes back? If it's really a hardware problem, many inquiring minds would love to know.
Click to expand...
Click to collapse
Yes of course !

Well, 4 days to receive my phone !!
and they have changed :
_motherboard
_antenna
and MAJ rom and radio
Version de ROM : 1.56.163.8 ===> 1.56.163.9
Date de ROM : 09/04/07 ===> 10/15/07
Version de radio : 1.27.12.11 ===> 1.27.12.32
Version de protocole : 22.45.88.07H ===> not changed

are you saying you have gotten your phone back? is it working now?

3G Issues still - Help needed!

Hey all,
I've had my TyTn II for a while now and everything's been ok.
I recently upgraded my rom, from an old Duttys rom to a new one, since doing that my phone would not pick up signal at all - I couldn't phone and people couldn't phone me - it looked like my phone had reception but the second I went to call all the bars dropped off.
I posted on here. - It's the radio people assured me. I swapped radios. 1 million times.
Everytime, the 3g would work for a few hours and then the same problem.
I decided it was the rom. I installed a different duttys rom yesterday, and low and behold, the phone worked. Calls, tinterwebs the works.
Got home. Same old problem.
The one thing that links the roms is they're both Windows 6.1.
I'm using a MDA Vario 3 on T-Mobile UK.
Can anyone help me?

31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!

bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
If you want to stick with WM6.1 do as follows:
(i hope you've got HARDSPL...)
Run the TriColor mode and install radio same as i do (signature)
when it start to restarts hold the camera button so you can boot tricolor again without loading rom.
Install your favorite ROM,
When everything is configured, run Connection setup again and restart your phone. Test it.
If it still doesent give anything it could problem with some third party apps or your device itself.
You can try my configuration it works perfectly for me.
Cheers,
Chris

Giving that a go today - will chuck you over some $$$ wonga if it works! Thanks.

I hope that everything will work fine for you. Im always happy to help.
Cheers,
Chris

Tried - No joy - but thanks - anyone else got any ideas?

I have a similar issue. On my 3rd phone now (Orange) due to phone not connecting in 3g mode to make calls. Seems to be an issue where it fails to switch automatically between GSM and 3G, although it often shows there is a network connection (even though there isn't - really anoying).
However, by turning off hsdpa it finally seems (6 hours or so) to stay connected to the network and able to make calls. Can anyone else with the same problem try this?
I don't enough about hsdpa to understand why having it switched on should make a difference, unless it changes the functionality of the radio. Suggestions welcomed.

You may have a faulty handset.
Exactly the same problem as my friend experienced with his MDA Compact 2. I tried flashing new ROMS and it seemed to fix it but in time he'd begin to suffer from a disappearing signal bar and random dropouts before, during and after calls.
You could try turning your network to GSM only and see if that makes a difference. I'm on T-Mobile and I know that last week I couldn't use my phone in 3G mode for 36 hours or more owing to a network problem in my area, gsm worked fine though.

not convinced about the faulty handset although it is a possibility.
I am starting to think that with the hsdpa enabled it somehow changes the way data and voice calls are handled.
Really could do with some opinions on hsdpa and whether enabling it or disabling it changes the functionality of the phone or the interaction with the networks

bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.

T-mobile have had problems with there 3G in the last week in northern Uk. I am still getting a few problems each day as you describe. I dont know, but I am assuming they are doing some repairs

kilrah said:
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.
Click to expand...
Click to collapse
Still, my experience is that there maybe faulty hardware out there, but by disabling hsdpa everything is fine. I'm currently making plenty of calls on 3g network, dowloading lots of data on 3g network. My previous problems were when the handset showed it was connected to the 3g network when it wasn't able to take or make calls or download data. Before, the only thing I had tried was manually selecting GSM in the connection settings.
I'm not saying that disabling hsdpa is a good thing or a solution, just that it might help some smart person to identify what is going wrong.
Any help out there?

htc diamond freezing

Hi!
i am new here, and i do have a problem.
I have my HTC Diamond since 2 weeks, and it is blocking (freezing) once per day: the device is on standby, i try to turn it on, but nothing happens, always a black screen, not even the restart button works; the only solution is to remove and put back the battery.
the issue is that if someone calls me during this "freeze", he gets that my phone is ringing; but i get nothing; and not even a missed call after i succeed to turn it on.
- ROM version: 1.93.479.3 WWE
i highly appreciate if somone can help me with this problem.
thanks,
Tony

I've had this exact problem, but the reset button on the back does work when this happens. I'm in the US on T-Mobile in NYC using a European Diamond. I work in a building that has very weak T-Mobile coverage and I've found that I only get the problem when I am at work. On the weekends and at night, the problem never happens because I am usually in an area that has either no coverage or good coverage. I have not eliminated the problem, but I have discovered that setting the network type to "GSM" and the band to "UMTS(850+1900)GSM(850+1900)" reduces the incidence of the problem for me to once every few days. I'd love to hear a good solution to the problem as well.

sounds like a problem with the Radio, it could be that the weak signal is causing the phone problems.
Try flashing a newer Radio version, and make sure all the settings (as Drachen said) are correct.
If you arent happy with Flashing a Radio, then send it back and get a repacement (chances are it will have newer firmware)

I have the exact same issue as you have. I had basically tried all sorts of ROMS, be it stock or cooked. It seems that since the upgrade to all v1.93 roms, this problem became more frequent.
Check this link here. I posted some screenshots of my problems there.
http://www.ppcsg.com/index.php?showtopic=102551
I've tried Vic's rom, Swift's roms, stock 1.93 rom with stock spl etc.. all with no success. it would be stable for the first 1-2 days after flashing, but immediately after that, it will happen like twice a day.
Like your case, I'm having this "whitenoise" screen (instead of a blank screen, which i used to have at times also) and I tried calling myself from my land line. I can hear the ringing but my phone does not respond.
So since then, here's my suggestion.
DISABLE your TouchFlo3D. Use default Today screen or SPB Mobile Shell. Thats what I did and I haven encountered a single issue since then for 2 days straight. Try it for a day or two to see.
Base on my analysis, our Diamonds has a defect on the 3D gpu chip. Cos corruption only occurs on programs using the HTC 3D driver (e.g. the OpenGLES api from Koush) while normal 2D functions is perfect.
I am waiting for the next ROM update to see if it fixes the issue before I send in my set for repair before my warranty ends, but I feel its gonna be hard to replicate the issue to the service engineer.

I'm going to wait until the end of the week to declare that the problem has been solved, but I'm having a LOT of luck with the latest radio ROM (v1.00.25.BS14) since it was posted on Fri morning (for me), and have had no freezing problems through the end of Tues. Tony1313, try upgrading to the latest radio ROM on the radio ROM thread in the development forum for a while and see if it helps you. Another set of eyes on the problem would be good.
knave, I don't think the cause of the problem for you is the same as it is for me. I haven't gotten any graphical glitches yet on my Diamond and I've only seen the snow screen you're talking about once when charging overnight (in the 3 months I've had the Diamond). As I mentioned, the crashes only happen in one location (my office) and never happen after-hours, weekends or on vacation. The two things I did to reduce the frequency of problems (that helped) were to change Exchange Activesync from "Automatic" to "Manual" during work hours and to set the bands in the control panel as above. All that makes me believe my problem is radio/reception related.

Drachen said:
I've had this exact problem, but the reset button on the back does work when this happens. I'm in the US on T-Mobile in NYC using a European Diamond. I work in a building that has very weak T-Mobile coverage and I've found that I only get the problem when I am at work. On the weekends and at night, the problem never happens because I am usually in an area that has either no coverage or good coverage. I have not eliminated the problem, but I have discovered that setting the network type to "GSM" and the band to "UMTS(850+1900)GSM(850+1900)" reduces the incidence of the problem for me to once every few days. I'd love to hear a good solution to the problem as well.
Click to expand...
Click to collapse
Hi Drachen I did a similar thing to you except I set it too GSM + AUTO it solved my SOD problems completely. Here is my story.
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.

i have freezes many times each day, even if im using it with no sim card. i don't even know what to do.
i have a stock rom.

I bet you got the 1.93 ROM and not 2.03, go update to it!

My problem is:
when a turn it on, it just show htc background and that's all
who faced with this problem?

Wireless and network signals recently very low

Hi all,
Within the past week or so, I've noticed a fairly large drop in the signal strength from both my wireless lan and 3g signals. With the cell signal, it was even dropping to edge sometimes when I was outside in an area which used to give me full bars. Wireless isn't much better, and it seems to be fluctuating between 4/5 signal and 2/5 signal even though I'm close to my router. Again, I used to have full signal in the same location. Nothing really would have changed.
Yesterday I tried flashing Continuum (2.3.4) instead of running the stock 2.2 that I had before. The 3g signal seems to be *slightly* more consistent, although I'm still not at full bars, whereas I always was before.
Is this a common occurrence? Is it my hardware, and can I fix it myself, or do I need to send it in to Rogers? I've only had the phone for about 6 months now. I wonder if it's under warranty still (assuming I flash back the original ROM and bootloader).

If anyone has any suggestions it would be much appreciated. It's odd, but the wifi signal almost gets boosted when I'm trying to use the internet, but not to full bars even when I'm near the router.

Bump. Is this the wrong place to ask this question?
Cheers

My AT&T Captivate has similar issues. Mine started about a month ago. I haven't put any effort into figuring out the root cause.

Yeah, I'd really like to figure out what's up though. Does the hardware just crap out after a few months of use? Thanks samsung!

Lucky75 said:
Yeah, I'd really like to figure out what's up though. Does the hardware just crap out after a few months of use? Thanks samsung!
Click to expand...
Click to collapse
This trend happened with my HTC Aria as well. I don't believe its anything related to Samsung hardware crapping out.

So, if it's software, what would be consistent across a ROM and kernel flash?

I recently fixed a network error effecting call quality by flashing a new modem. I know our issues are different, but since you did flash new ROM i dont think it could hurt.
Sent from my SAMSUNG-SGH-I896 using XDA App

Stumbled across this article on Toms Hardware today and felt like it was a good read for this thread.
http://www.tomshardware.com/picturestory/571-wi-fi-beamforming-networking.html

Unfortunately it's not just my wifi that has issues, but 3g as well.

Lucky75 said:
Unfortunately it's not just my wifi that has issues, but 3g as well.
Click to expand...
Click to collapse
Have you tried flashing a different modem? The one that came with your current rom may be different than you had before which would account for your weaker signals. Different modems work better in different areas. Try something else and see if it doesn't help, such as JK4 or JL3.

I haven't yet, but I actually had the problem before I flashed the ROM.

Where are you located. I have absolutely ATROCIOUS reception in Atlanta, and ATT says they have some 50 towers down. Your area might be the same. In my basement where I used to have 3 bars consistently, i know have to run around the basement struggling to get one bar to send a text. ATT needs to get their act together or everyone might start switching to Verizon.

In Toronto, Canada. We usually have good reception. It's only recently that I have had issues.

check with other people such as your family and see if they have bad service too, if so call your service provider, there may be an issue on their end. Other than that all I can suggest would be a full reset to factory and a master clear and then restart from there. While that is annoying, it might be worth it to solve the problem.