tried to use the unlocking tool for blue angel
tried it many times followed all the steps but it just wont work
do i need to downgrade to wm2k3 for my blueangel for the tool to work?
of just the radio?
if i must downgrade where do i download the rom for wm2k3?
main problem
need to unlock my ba
currently using wm 6.1 by xplode
Related
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
As written before, u need AKU 1 to CID unlock your phone..the only way to be sure is to unlock again. Use buttons rom.. downgrade to that... unlock the phone.. install the rom again so the IPL and SPL are the same..then you can switch to whatever rom you want. How ever, you havent shown what type of Wizard you have whether its a G3 or a G4..the above method is what i used for my G3 Wizard
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Bonusbartus said:
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
Click to expand...
Click to collapse
1. Thank-you for posting in a new thread and not in a ROM release thread.
2. Do you have a G3 or G4 (what is your IPL/SPL?)
2a. If you have a G3 read the Sticky post The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards.
2b. If you have a G4 log onto the IMEI pay site (links all over the place) and pay to get your phone unlocked.
3. IF you have a G3 rom you must downgrade to CID unlock. It isn't possible to CID unlock from AKU2 or higher (read the sticky, it tells you what you need to do)
4. The best thing to do if you are unsure is to just repeat the unlock procedure. It won't hurt a thing if you are already unlocked, but will unlock you if you are locked.
5. Don't do anything flash related until you know for sure, beyond a doubt which version of Wizard you have (G3 or G4) If you have a G4 and use G3 procedures you WILL most likely ruin your device.
6. You won't get this error if you follow the steps in the correct order from the upgrade guide.
7. Good Luck
Bonusbartus said:
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Click to expand...
Click to collapse
With your G3 just follow the steps, in order, from the sticky and you should be able to end with whatever ROM you choose. Some of the steps may not make sense but, they are necessary and prevent common issues if followed correctly.
Well, I do have a G3 so I can follow the tutorial,
ipl and spl are 2.18,
only question left, CAN I downgrade to the wwe rom in the tutorial? that's what I wanna know, because I now have a nld rom, can I flash to the wwe rom in the tutorial without CID-unlocking?
well I think I just try
thanx
oh btw, any recommendations on which rom to flash to after unlocking? and I saw something about radio only roms and page-pools what would u recommend there?
Hi
I just got a dopod c800 AKA p4350.
Its got WM 5 on it. I wanted to upgrade the same to WM6.
Have read the threads but couldnt figure the english rom version and also need some help on upgrading.
can someone point me to the right rom and the instructions.
thanks
Whatever you do, if your SPL is currently 1.XX do NOT hardSPL or use USPL. Use the official RUU to attemp to flash your device. IF it changes your SPL and IPL to 4.xx then you can use HARDSPL and USPL.
Other than that, you can download the official WM6 from the thread that's stickied that talks about all the ROMs.
Hi @ll..
i have a MDA II from T-Mobile (PH10A).
But before i flash it to WM6 i want to know, if its possible to flash then back to WM2003 with my Shipped Romversion of T-Mobile??
I found nothing about that...
And have i to CID-Unlock the device, before flashing to WM6??? (like the other devices???)
Or can i only flash any WM6 ROM here in Himalaya-Forum (and then hard-reset and format the chip in the bootloadermenu?)
Thanxx 2 @ll
never heard about cid locking or unlocking for himalaya
only thing locked on some himalays are sim
i would asume that whatever actions was don to flash the device to wm6
5 or anything will work just fine flashing it back to 2003
just with a 2003 nbf file rather then a wm5 or 6 nbf file
I`ve fleshing different rom in to hima - everything was Ok.
maybee problem is in youur computer
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
I thought I had found one, but the RUU complains that it is the wrong version (Error 300) and I get nowhere. I still have WM6.1 working fine... how infuriating :0p
Well,as you say its a G4 and upgraded to wm6.1,ok
First,how did you upgrade to wm6.1,which method did you apply to upgrade,was it SoftSPL or HardSPL ?
If you applied SoftSPL,then,just simply download official stock rom and flash it,it'll work,but if you applied HardSPL and the IPL/SPL are changed,then first you'll have to Remove HardSPL,revert back to Original Official IPL/SPL of the carrier and then you'll be able to reflash wm5,ok
Let me warn you here,if the phone is HardSPL and you flash any Official stock rom without removing HardSPL first,will 'Brick' your phone.
barkerben said:
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
Click to expand...
Click to collapse
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
himig_natin said:
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
Click to expand...
Click to collapse
Check out this Sub-Forum,you'll get all the info about upgrading a G4 device:-
http://forum.xda-developers.com/forumdisplay.php?f=343
Hi. I've been trying to unlock my p3600i on windows 7, after i've installed the activesync 4.5 xp drivers.
I've managed to flash several custom and an official ROM, but i can't flash a RADIO. Neither the unlocker or the latest radio 1.56.70.11 worked, they just stuck at 0% for ever.
What should i try to do in order to get it unlocked? Am i doing something wrong?
Thanks in advance.
Hardspl version???
What hard spl version do you have mate???
follow this link : http://forum.xda-developers.com/showthread.php?t=299659&page=19
see the post #184, hope i helped you fix your problem as i suffered that problem my self very recently..