Database Develop

Rom from SD card. Help!

Hi, Does anybody have a Rom on SD card ? I would like flash my charmer from SD card, but I dont know how. I try connected charmer via USB but its impossible
Thanks for your help in advance
Peter

optiker said:
Hi, Does anybody have a Rom on SD card ? I would like flash my charmer from SD card, but I dont know how. I try connected charmer via USB but its impossible
Thanks for your help in advance
Peter
Click to expand...
Click to collapse
Any luck on this one, I need a ROM on SD card too. Tried to upgrade to WM6.1 and upgrade went thru as if it worked. I tried resetting after and all it does is hang on the t-mobile start up screen.
Help please

You you haven't made a Hard Reset. Go to the bootloader (press Camera while resetting) and flash the original T-Mobile ROM then. Don't worry you don't need a Active Sync connection for that.
That is the only thing I can tell you. Cause for SD upgrading you need a CID ulocked device. And most devices aren't unlocked. So no SD upgrade!
But try the way I told you.

Hi habe folgendes Problem, beim Flashen des Roms Windows Mobile 6.5 für den MDA Compact 2 hat sich ein Problem ergeben und er hat es nicht fertig geflasht. Nun bleibt mein MDA immer im T-Mobile Logo hängen. In den Bootloader komme ich aber habe keine Verbindung mit dem Rechner. Kann ich vll über die SD Karte den Rom draufspielen? Wäre wirklich für eure Hilfe dankbar.
Im Bootloader steht IPL 3.08.001 sowie SPL 3.08.001
Vielleicht habt ihr Ideen wie ich das Problem lösen könnte.
MFG Andi

Error 262 and roms biiiiig problems !! Please help !!

HI IM A BEGINNER AND I NEED HELP TO UPDATE MY X1,,
Ive got windows mobile 6.1 in my phone but i want to update to eneryrom kovsky !!
ive tried for 7 hours and i still have problems..
my first problem is that error 262

kingforlong said:
hi im a beginner and i need help to update my x1,,
ive got windows mobile 6.1 in my phone but i want to update to eneryrom kovsky !!
Ive tried for 7 hours and i still have problems..
My first problem is that error 262
Click to expand...
Click to collapse
pleeeeeease heeeeeeeeeeeeeellp !!

Hi
sorry ich kann zwar fast alles in englisch lesen, aber mit dem schreiben haberts, also bei mir hat ein Wechsel des USB - Steckers geholfen!
Sorry!!!
a nice day!
Please look at this thread: http://forum.xda-developers.com/showthread.php?t=431218
ROUBLESHOOTING TIPS:
- read the instructions.
- read the instructions.
- read the instructions.
- if you get connection error in RUU after the device goes to tricolour screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. read the thread for even more tips that I don't remember now. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if hardspl EXE won't run, and you are on vista, try to right click it and use "run as Administrator" option
- if SSPL-Manual.exe or enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
it work!

1- have you made Hard SPL first?
2- Have you try with SDcard method?

Need some help (German Preferred)

Hi, I currently use the HTC EVO, and I gifted my G1 to my daughter in Germany.
I had it rooted, but decided for the sake of simpleness to unroot it. I am American but my daughter is German American. Her English is decent enough, but for technical reasons I am having a hard time explaining how to root.
She uses her cell with a Sim card for phone (without data plan) and uses WiFi for the internet. Well she was able to root and install recovery, but now she is stuck. She can not log into her account because she can not set up the Wifi. I know the current Froyo rom allows you to simple skip login so you can set everything up.
It has been a while since I have messed with the G1 (6mos. or longer) so I am pretty unfamiliar with current ROMs. She needs a ROM that has German Language/keyboard support, and one that will allow her to bypass login to set up wifi, and should be able to do Apps to SD card. I do not think that she did the DangerSPL, so any ROM should also contain instructions if it requires SPL.
Any help would be greatly appreciated.

First question: Why did you unroot? If you did't want all the "new" features you could install one of Enomther's Official-ROMs.
Second question: What version do you have installed now on the phone? What radio, what SPL?
One hint: do not(!) install DangerSPL, it's not needed. You can install each ROM using Firerat's custum-mtd patch.
PS: you can also pm me
Sent from my Htcclay's Superfly G1 ADS using XDA App

I gave my old phone to my daughter in Germany. I didn't want it to be too complicated as her first Android phone. Now she wants to have Apps to SD because the memory is getting full. So she Rooted. Now she can't log in because her Data is only over Wifi. I need to get her a ROM that allows you to skip that part initially like in froyo. I know there were also cupcake roms that could do it as well.
I will ask her which radio and SPL she is currently using as she JUST rooted and now is at the "Qual Der Whal".
As far as Enomther's ROMs are you referringto these? http://forum.xda-developers.com/showthread.php?t=538456&highlight=Enomther
If so, do they meet my reqs? German, Apps2SD and Bypass initial Log in.
I am pretty sure App2SD can be done on any Rooted G1, and As long as I do the EU version I can program the QUERTZ keyboard? Can I also bypass the log in?

hi i am that girl with the G1 problem
so my dad is told ask me what kind of radio and SPL i have on my handy but i think ich war noch nicht so weit gekommen so i don`t know where i can know what kind of radio and SPL i have right now on my handy
please i need help

so i have root my handy
i have root my handy with this android-developers site Howto Root auf dem T-Mobile G1
und ich bin ende Firmware Downgrade gekommen als ich mich da einloggen sollt eging das nicht mehr weil ich nur über WLAN ins internet gehe and then my problem comes what musst i do now i can`t sign in my acount without WLAN
i need help

Da is jemandem von diesen thread die auch helfen will. Der sagte der muss gucken auf seine alten G1s und den sagt dir besheid was du machen solls.
http://forum.xda-developers.com/showthread.php?t=812729

So I'm the guy from the Evo forum.
CM6 works perfectly fine. It lets you skip the login screen + has German.
I'm not 100% on keyboard, but Android has pretty much all the official keyboard for different language.
You do need DangerSPL.
I've never used Firerat, so I guess I'll just tell you how I would do it.
1) Install DangerSPL
Link: http://wiki.cyanogenmod.com/index.php?title=Dream:DangerSPL
A) Flash the right radio and the SPL
2) Partition SD card (there are a lot of tutorials on this). This is so apps2sd will work
3) Flash CyanogenMod 6 and the "Google add-on" if you want access to any google apps.
Link: http://forum.xda-developers.com/showthread.php?t=722801
Err.. my German isn't that great, but you can still try and I'll see what questions I can answer.
Hope that helps.

I appreciate it, but I am just going to have my daughter send me the phone. I will fix it here, but thanx for the info, I will go that route with CM 6

Hi all, do think twice to install DangerSPL, it's not needed and sometimes may cause bricks. I suggest to use the 1.33.2003 SPL and go with the custom-mtd method. You are more flexible with the the partition layout and it will not brick if you are still / again on a 1.x radio. I am running with it now for about 4/5 month patched once the recovery image and since then forgot it almost. The only disadvantage: You have to patch the boot image each time you install a new boot image.
I agree CM6 is working well. The current nighties and with the new drivers from the official MT3G release it's really flying a2ext it not working from stock, but you can manage it with firerat's all-in-one patch, but with custom mtd there is also a chance, that you will not need it.
Just my 2 cents.

I will go your route AndDiSa, When the phone gets here I will contact you.

[HELP] clean german stock rom as nandroid backup needed

if anybody can help, i desperately need a (clean) german stock rom as nandroid/clockworkmod zip file.
my USB port is borken and lg told me they won't accept the device for repair with a custom rom installed.
as USB doesn't work, i can't use nvflash or whatever to flash the original rom.
and yes, i checked & reinstalled all drivers, cleaned the usb port for possible grit, rebooted all the pc's i'm trying to connect to ... as far as i can tell, the data connection is borked physically (loading still works).
any help is highly appreciated!
albert
@admin: if this is the wrong section, please move the thread

der_bert said:
if anybody can help, i desperately need a (clean) german stock rom as nandroid/clockworkmod zip file.
my USB port is borken and lg told me they won't accept the device for repair with a custom rom installed.
as USB doesn't work, i can't use nvflash or whatever to flash the original rom.
and yes, i checked & reinstalled all drivers, cleaned the usb port for possible grit, rebooted all the pc's i'm trying to connect to ... as far as i can tell, the data connection is borked physically (loading still works).
any help is highly appreciated!
albert
@admin: if this is the wrong section, please move the thread
Click to expand...
Click to collapse
Wrong section nothwithstanding, you are in a Catch 22 situation.
Even if you were to get a *clean* nandroid backup (which you won't get, since the recovery partition has to be different to make a nandroid backup to begin with, so you'd have to also find the exact recovery-version for the ROM and replace the one in the backup), you wouldn't be able to flash the proper baseband, as that can only be done via smartflash (or possibly nvflash) which requires USB.
So let's try something else first, ok?
What happens if you remove the battery, and hold vol-down while plugging in the USB-cable?

Hello ::Trym,
thanks for your fast reply/help.
I do get the software update logo, but smartflash does not recognize the device (means, the com port stays blank).
LGUnity drivers are up to date. As i have a win7/64bit system, i tried this also with drivers included in the 'LGDriver.exe', same result.
kind regards,
albert

der_bert said:
Hello ::Trym,
thanks for your fast reply/help.
I do get the software update logo, but smartflash does not recognize the device (means, the com port stays blank).
LGUnity drivers are up to date. As i have a win7/64bit system, i tried this also with drivers included in the 'LGDriver.exe', same result.
kind regards,
albert
Click to expand...
Click to collapse
Thanks, that what was I wanted to know, so far. Smartflash requires a special set of drivers you can download from here: http://forum.xda-developers.com/showthread.php?t=1008070 (first post, "smartflash drivers". Please disconnect the phone, install those, reboot your computer and start the phone in smartflash mode again.) If we're lucky you'll get a virtual com-port recognized.

hi trym,
i unistalled the other drivers, installed the ones from the post, but unfortunately, still no com port is recognized ...

der_bert said:
hi trym,
i unistalled the other drivers, installed the ones from the post, but unfortunately, still no com port is recognized ...
Click to expand...
Click to collapse
Dang, I'm afraid that was our last hope. I find it so very very strange that everybody who has usb-problems are still able to charge, in other words just break the signalling-pins and not the power-carrying ones. Just doesn't sit well with me, you'd think that everything would break, right?
I'm sure you've done this already, but I mention them anyway, to be on the safe side:
o Connect directly to motherboard, not via a hub or a case-port.
o Use another cable, preferably a short, unused one (to get as much pressure on the pins as possible.)
o Don't use any kind of overclock.
o Cool down the phone before trying again. (Not in a freezer, mind you, just take out the battery, leave the cover off and give it a healthy airing outside.)
...and anything else you can think of. To be honest I think there's little else to do. You may simply have to play very very stupid and see if the service-center bites. Good luck.

well, as i still have the original 218 baseband, at least i'd like to have the right rom on the device before sending it in:
so again:
does anybody have the possibility to provide me with a nandroid/clockworkmod backup of a german stock rom?
this would really be a great help!
thanks in advance,
albert

you phone will be sent not to LG in germany but LG support send you sending slip to send your phone for repair/replacement to www.w-support.de. And may I know which rom are you running currently?
And you do not need German Specific thing, any official will do, just make sure it be official LG rom. And dont worry about CWM recovery, LG will not even look at it, what support do is try to Flash phone again by using their computer, they dont use recovery.
And also check which version is latest for you by replacing 0000000000 with your EMEI in following link, and post link you get of kdz over here.
Check Latest Version

hello bhanvadia ,
thanks for the info.
i'm runnuing the current CM7 nightly.
when inserting the IMEI into link you provided, it returns the following KDZ links:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990/ADEUBK/V10d_00/V10D_00.kdz
http://csmgeic.lgmobile.com/swdata/WEBSW/LGP990/ADEUBK/V10d_00/V10D_00.kdz

Verdammt...hab dich zu spät gelesen. Hab gerade heute mein LG komplett neu aufgesetzt und dabei auch mit nvflash die deutsche 10d aufgespielt. Ich hätte dir ein Nandroid machen können
Das tut mir wirklich leid
edit: ich habs für dich gefunden. Wird über die Recovery geflasht und ist die 10c
http://www.multiupload.com/JMERXAKZQS

super, vielen dank!
werde es gleich mal ausprobieren.
hoffentlich klappts dann mit der reparatur ....
edit: nachdem ich rausgefunden hab, dass man vorher auf ext3 reverten muss, hat's geklappt. wusste gar nicht mehr wie sch... die stock firmware ist im vergleich zu CM7, wahnsinn ... also nochmals vielen dank!

Big trouble after installing omnia driver x1,hardreset-HELP PLEASE!!!

i have a big problem with my X1...i installed the omnia graphic driver it was ok but not that good...i thought when i uninstall this cab,there is no graphic driver anymore,so i started spb backup to make a backup to get the old settings back..then i made a restart...
after restart windows mobile starts strange and...
the graphic looks to small,hard keyboard doesnt works,he doesnt find the storage card anymore so 90 % of my programs doesnt work
i made a hardrest per settings- delete 1234 (it worked)cause with the normal hardreset i just came to bootloader
i was happy and thought the problem would be solved windows starts normal ... i made the backup from sd card ...BUT
i had installed f secure antitheft since a year...f secure want to have my normal password after the backup...i tried to login and it failed...he doesnt accept my normal password anymore and f secure support cant sent me a message to the phone to unlock it (no phone reception after a hardreset)
NOW:
when i try to make a hardreset by pressing the softkeys and power i just came to bootloader..when i start the phone normal i just came to the f secure screen and password failed
AAAAAAAAA I NEED YOUR HELP GUYS

Use word "make backup" more carefully. I can't get what you exactly did.
When you uninstall cab, all its files are deleted and settings restored. That's how it should be in case of omnia driver. Check if this value looks like this:
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
"LocalHook"="d3dm_ati.dll"
But... have you tried to use phone without restoring backup? Or restoring it, but partially?

1. tryed a normal hardreset (softkeys and power button) but i just came to the bootloader-nothing else happens
2. hardreset per software Start>Settings>System>Clear Storage then enter the number 1234 ok that worked
3 windows starts normal
4.i started spb backup from sd card to get all the settings,progs,dokuments back
i made a backup in september that worked
5. the tool starts,after the restart f secure anti theft starts and ask for password
but it doesnt accept my password anymore so i cant use my xperia
6. i dont know how to hardreset my phone right now,cause i just came to bootloader or to the f secure password

doing a hardreset but bootloader starts? that's very unusual and probably a premiere...
reset in winmo-settings isn't the same as a real hardreset, so it's no surprise it didn't fix your problems.
are you doing it exactly like this?
- power off your phone
- take it in both hands and press the silver keys
- keep them pressed
- press the power-button shortly (as if normally booting the phone)
- i hope you are still pressing the silver keys? (not the power-button)
- patiently wait, keeping the silver buttons pressed
- a white screen should show up, with instructions
- btw, you can now release the silver keys

for a little moment comes the white screen
loading
"no image file"
then it goes back to the bootloader
kovs110
spl-0.78.0000
MicroP1-787
MicroP2-787
Serial
google found this:
"The screen is showing that ou haven't doin' hardSPL, you should do it before flashing ROM. You can read @ XPERIA X1 Developer's sticky note about that. Good luck!
Aftyer you have succeed in hard-SPL will show (If I'm not mistaken it) 0.78.Ollinex (not SPL-0.78.000)"
so i have to find out how to hardspl my xperia,if this a solution
and the guys from f secure anti theft support cant help me

that's normal bootloader-behaviour without kovsimg.nbh on sdcard and no usb-cable attached. so far, so bad.
assuming you ARE trying to do a hardreset as described above (you didn't answer my question) and are not entering bootloader by pressing power - vol-down...
what have you done with your system?!
flash stockrom.
(and btw, you have stock-spl, so don't try to flash a custom-rom)
so i have to find out how to hardspl my xperia,if this a solution
Click to expand...
Click to collapse
no, hardspl is for flashing custom-roms. it has nothing to do with doing a hardreset. but at least you're using search...

mal auf deutsch..
ich halte die silbernen tasten gedrückt,drücke 2-3 sekunden lang power,dann kommt der bootloader dann kurz
loading
"no image file"
und wieder der bootloader
mach ich es genauso wie du es beschreibst ,beide silber tasten gedrückt halten,power kurz antippen,die silbertasten gedrückt halten ,dann kommt kein weißer bildschirm sondern er fährt normal hoch vom sony ericsson symbol bis zu diesem f secure passwort scheiß

okay, then flash stockrom. (no hardspl needed for that)
i don't know HOW you've done it, but you messed up your system real good.
edit:
bummler said:
mal auf deutsch..
ich halte die silbernen tasten gedrückt,drücke 2-3 sekunden lang power,dann kommt der bootloader dann kurz
loading
"no image file"
und wieder der bootloader
mach ich es genauso wie du es beschreibst ,beide silber tasten gedrückt halten,power kurz antippen,die silbertasten gedrückt halten ,dann kommt kein weißer bildschirm sondern er fährt normal hoch vom sony ericsson symbol bis zu diesem f secure passwort scheiß
Click to expand...
Click to collapse
you do realise that this makes no sense at all?!
what now, does it enter bootloader or does it power up normally until the password-prompt?!
but doesn't matter anyway.
flash stockrom and hope that it brings everything back to a working order.

..when i hold the two silver buttons and press power for one second...nothing happens..system starts normal till the f secure password comes
when i hold the silver buttons and the power button long,i came to
bootloader
"no image file"
bootloader
now i search a thread "how to flash stockrom on xperia x1"
and try my best to solve this ****

"silver buttons" - are you talking about the silver buttons on the side of the phone?
because i'm not, i'm talking about the ones below the screen...

oh mann...yes that works...i did a hardreset ^^
the buttons below the scree are black on my xperia x1 and my back cover is chrome-custom made^^
now we will see if the backup stuff works

dude, that's... now come on - seriously?!
you know, forum rules forbid me to write what i really WANT to write...

it works it works...i made a backup without f secure and everything is back
just wimospeed doesnt works. it is on 672mhz but in the device info on 528mhz..maybe i find a solution for that,cause its a little slow right now
BUT
thanks caliban,thanks ultrashot
3 days trouble gone

well, changing speed in sys-info is easy. all you have to do is hexedit nk.exe.
dude, it's not supposed to change. you're fine, everything is right as it should be.
if you run wimospeed.exe, it will show you the real current speed.
edit:
bit of advice, 672 mhz is tricky on x1, kinda on the edge. there are some devices which can run it stable, but for most 652 is max (this is hw-dependant). it doesn't freeze right away, but you might notice some strange behaviour like app-freezes, freezing after 2 days or sudden file-errors. if that occurs, see if it goes away with 652 mhz.
so try it, maybe you're one of the lucky few.

hm i thought settings-info would show the actual prozessor speed when i change it in wimospeed but
prozessor:MSM7200A-528mhz
Speicher:200.73mb

i don't know why you thought that, but it's static.
hardcoded in nk.exe. one can change it, but that includes cooking your own rom, know what you're doing and hex-edit.