Database Develop

Not able to run a single of your tools

KaiserUnlocker
HardSPL
etc.
I want to unlock my MDA Vario 3, but I can't run a single tool. It stuck in 3 color mode and nothing happend after unplug and plug the USB.
KaiserUnlocker won't work because of .NET CF Problems...
Is my device different from all the others???

[email protected] said:
KaiserUnlocker
HardSPL
etc.
I want to unlock my MDA Vario 3, but I can't run a single tool. It stuck in 3 color mode and nothing happend after unplug and plug the USB.
KaiserUnlocker won't work because of .NET CF Problems...
Is my device different from all the others???
Click to expand...
Click to collapse
I'm afraid you are different because you don't read. You will find the answer to all your questions in here: http://forum.xda-developers.com/showthread.php?t=383904

Well, I read a lot and spent a couple of hours yesterday. But ok, I give it another try before I beat the sh** out of that bloody peace of T-Mobile sh**.

Try flashing using your MicroSD, that should work. HTH

Kannst Du mir sagen, was die microSD damit zu tun hat?
Ich habe fast das Gefühl, dass das ROM nochmal modifiziert wurde. Ich teste das gleich alles nochmal unter Vista.

[email protected] said:
Kannst Du mir sagen, was die microSD damit zu tun hat?
Ich habe fast das Gefühl, dass das ROM nochmal modifiziert wurde. Ich teste das gleich alles nochmal unter Vista.
Click to expand...
Click to collapse
-> PM (the forum is english only)

KaiserUnlocker
I'm going on and on...
Last thing, KaiserUnlocker.exe
I've installed a new ROM, "NoThrills WM6.1 GER V3". Great, all the T-Mobile sh** is gone
But my Kaiser is still an ordinary PDA
I thought, the new ROM would solved my problem, launching the KaiserUnlocker.exe. But it didn't. Please take a look at my 3 pictures.

[email protected] said:
I'm going on and on...
Last thing, KaiserUnlocker.exe
I've installed a new ROM, "NoThrills WM6.1 GER V3". Great, all the T-Mobile sh** is gone
But my Kaiser is still an ordinary PDA
I thought, the new ROM would solved my problem, launching the KaiserUnlocker.exe. But it didn't. Please take a look at my 3 pictures.
Click to expand...
Click to collapse
That's because KaiserUnlocker.exe must be run on your windows PC, not on your PDA.
You have to connect your PDA to your computer and then run the Unlocker-Tool on your windows PC. HTH.

WTF???
I'm so damn stupid
Thank's a lot!!!

Unlock Radio fails, incompatible device!
Step 1, Flash Hard-SPL fails, so I put Hard-SPL without KaiserUnlocker on the Kaiser. No Problem, flash successfull.
But why that incompatible device?

Wizard stuck in Bootloader

hey guys help me out here
i upgraded my ipl/spl to 3.08 and den wen flashing touchflo rom it had an error at 99% saying communication error ...
now wen i did da recovery and tried to reflash it .... in the bootloader when i insert the usb cable and start the upgrade utility the active sync disappears and den it shows an error the check da connection ...
can anyone tell me whats wrong and what to do
thanx

How to unbrick a phone search
If you search the forum for posts on how to "unbrick phones" you may find a solution.

Yeap
whateveryouneed said:
If you search the forum for posts on how to "unbrick phones" you may find a solution.
Click to expand...
Click to collapse
Search on wiki or just try this... reset your PC, dont run any other program on your PC neither the internet explorer neither the file explorer please then... sof reset your device, don't do a hard reset! remember just softreset. even if the activesync is not workind put your wizard in bootloader rgb screen and conect it via usb.... wait a little to see in PPC screen usb in a little letters at bottom... then start the upgrade original ROM to back to ipl/spl 3.08... are you sure that your device is cid sim unlocked?
download the Wizard service tool to check it please.... then retry the upgrade touchflo...

break until upgrade

hi,
i try to make it clear in english, but german is my frist language...
today i tried to update my xda mini, seems to be the same as the compact...
pc: win7, ultimate, 64bit
via usb... so far so good, never had problems with anything like that..
now, in between the installation, it failed and system says me, that the copnnection failed...
ok. i ried to start the xda.. nothing, only by taking out the accu, it starts complete new.. and runs nearly till the end... and then.. blacj screen,,
no light when putting in usb or the loader.. nothing..
taking out accu, the game begins from the start...
HELP, i want to give it my son, to be his first 'pc'... i dont wanna 'recycle this nice.one...
how do i get this engine started again... is it a win7-bug with that 'old' one.. please dont etll me that i need an xp again, just changed all my systems...

Hi!
Is it an XDA Mini?Because that's a Magician,not a Charmer.
I read it,you don't want to install XP,but I think you have to find someone with a PC that runs XP and try to flash your device from bootloader mode.
BR
Scootie

Scootie is right it is a Magician.
Look in the forum for that device.
(I know that the last post is a littlebit old but I say it again to translate it into German too)
Scootie hat recht beim XDA Mini handelt es sich um den HTC Magician.
Suche bitte is seinem Forum nach ROMs.

[HELP] clean german stock rom as nandroid backup needed

if anybody can help, i desperately need a (clean) german stock rom as nandroid/clockworkmod zip file.
my USB port is borken and lg told me they won't accept the device for repair with a custom rom installed.
as USB doesn't work, i can't use nvflash or whatever to flash the original rom.
and yes, i checked & reinstalled all drivers, cleaned the usb port for possible grit, rebooted all the pc's i'm trying to connect to ... as far as i can tell, the data connection is borked physically (loading still works).
any help is highly appreciated!
albert
@admin: if this is the wrong section, please move the thread

der_bert said:
if anybody can help, i desperately need a (clean) german stock rom as nandroid/clockworkmod zip file.
my USB port is borken and lg told me they won't accept the device for repair with a custom rom installed.
as USB doesn't work, i can't use nvflash or whatever to flash the original rom.
and yes, i checked & reinstalled all drivers, cleaned the usb port for possible grit, rebooted all the pc's i'm trying to connect to ... as far as i can tell, the data connection is borked physically (loading still works).
any help is highly appreciated!
albert
@admin: if this is the wrong section, please move the thread
Click to expand...
Click to collapse
Wrong section nothwithstanding, you are in a Catch 22 situation.
Even if you were to get a *clean* nandroid backup (which you won't get, since the recovery partition has to be different to make a nandroid backup to begin with, so you'd have to also find the exact recovery-version for the ROM and replace the one in the backup), you wouldn't be able to flash the proper baseband, as that can only be done via smartflash (or possibly nvflash) which requires USB.
So let's try something else first, ok?
What happens if you remove the battery, and hold vol-down while plugging in the USB-cable?

Hello ::Trym,
thanks for your fast reply/help.
I do get the software update logo, but smartflash does not recognize the device (means, the com port stays blank).
LGUnity drivers are up to date. As i have a win7/64bit system, i tried this also with drivers included in the 'LGDriver.exe', same result.
kind regards,
albert

der_bert said:
Hello ::Trym,
thanks for your fast reply/help.
I do get the software update logo, but smartflash does not recognize the device (means, the com port stays blank).
LGUnity drivers are up to date. As i have a win7/64bit system, i tried this also with drivers included in the 'LGDriver.exe', same result.
kind regards,
albert
Click to expand...
Click to collapse
Thanks, that what was I wanted to know, so far. Smartflash requires a special set of drivers you can download from here: http://forum.xda-developers.com/showthread.php?t=1008070 (first post, "smartflash drivers". Please disconnect the phone, install those, reboot your computer and start the phone in smartflash mode again.) If we're lucky you'll get a virtual com-port recognized.

hi trym,
i unistalled the other drivers, installed the ones from the post, but unfortunately, still no com port is recognized ...

der_bert said:
hi trym,
i unistalled the other drivers, installed the ones from the post, but unfortunately, still no com port is recognized ...
Click to expand...
Click to collapse
Dang, I'm afraid that was our last hope. I find it so very very strange that everybody who has usb-problems are still able to charge, in other words just break the signalling-pins and not the power-carrying ones. Just doesn't sit well with me, you'd think that everything would break, right?
I'm sure you've done this already, but I mention them anyway, to be on the safe side:
o Connect directly to motherboard, not via a hub or a case-port.
o Use another cable, preferably a short, unused one (to get as much pressure on the pins as possible.)
o Don't use any kind of overclock.
o Cool down the phone before trying again. (Not in a freezer, mind you, just take out the battery, leave the cover off and give it a healthy airing outside.)
...and anything else you can think of. To be honest I think there's little else to do. You may simply have to play very very stupid and see if the service-center bites. Good luck.

well, as i still have the original 218 baseband, at least i'd like to have the right rom on the device before sending it in:
so again:
does anybody have the possibility to provide me with a nandroid/clockworkmod backup of a german stock rom?
this would really be a great help!
thanks in advance,
albert

you phone will be sent not to LG in germany but LG support send you sending slip to send your phone for repair/replacement to www.w-support.de. And may I know which rom are you running currently?
And you do not need German Specific thing, any official will do, just make sure it be official LG rom. And dont worry about CWM recovery, LG will not even look at it, what support do is try to Flash phone again by using their computer, they dont use recovery.
And also check which version is latest for you by replacing 0000000000 with your EMEI in following link, and post link you get of kdz over here.
Check Latest Version

hello bhanvadia ,
thanks for the info.
i'm runnuing the current CM7 nightly.
when inserting the IMEI into link you provided, it returns the following KDZ links:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990/ADEUBK/V10d_00/V10D_00.kdz
http://csmgeic.lgmobile.com/swdata/WEBSW/LGP990/ADEUBK/V10d_00/V10D_00.kdz

Verdammt...hab dich zu spät gelesen. Hab gerade heute mein LG komplett neu aufgesetzt und dabei auch mit nvflash die deutsche 10d aufgespielt. Ich hätte dir ein Nandroid machen können
Das tut mir wirklich leid
edit: ich habs für dich gefunden. Wird über die Recovery geflasht und ist die 10c
http://www.multiupload.com/JMERXAKZQS

super, vielen dank!
werde es gleich mal ausprobieren.
hoffentlich klappts dann mit der reparatur ....
edit: nachdem ich rausgefunden hab, dass man vorher auf ext3 reverten muss, hat's geklappt. wusste gar nicht mehr wie sch... die stock firmware ist im vergleich zu CM7, wahnsinn ... also nochmals vielen dank!

Big trouble after installing omnia driver x1,hardreset-HELP PLEASE!!!

i have a big problem with my X1...i installed the omnia graphic driver it was ok but not that good...i thought when i uninstall this cab,there is no graphic driver anymore,so i started spb backup to make a backup to get the old settings back..then i made a restart...
after restart windows mobile starts strange and...
the graphic looks to small,hard keyboard doesnt works,he doesnt find the storage card anymore so 90 % of my programs doesnt work
i made a hardrest per settings- delete 1234 (it worked)cause with the normal hardreset i just came to bootloader
i was happy and thought the problem would be solved windows starts normal ... i made the backup from sd card ...BUT
i had installed f secure antitheft since a year...f secure want to have my normal password after the backup...i tried to login and it failed...he doesnt accept my normal password anymore and f secure support cant sent me a message to the phone to unlock it (no phone reception after a hardreset)
NOW:
when i try to make a hardreset by pressing the softkeys and power i just came to bootloader..when i start the phone normal i just came to the f secure screen and password failed
AAAAAAAAA I NEED YOUR HELP GUYS

Use word "make backup" more carefully. I can't get what you exactly did.
When you uninstall cab, all its files are deleted and settings restored. That's how it should be in case of omnia driver. Check if this value looks like this:
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
"LocalHook"="d3dm_ati.dll"
But... have you tried to use phone without restoring backup? Or restoring it, but partially?

1. tryed a normal hardreset (softkeys and power button) but i just came to the bootloader-nothing else happens
2. hardreset per software Start>Settings>System>Clear Storage then enter the number 1234 ok that worked
3 windows starts normal
4.i started spb backup from sd card to get all the settings,progs,dokuments back
i made a backup in september that worked
5. the tool starts,after the restart f secure anti theft starts and ask for password
but it doesnt accept my password anymore so i cant use my xperia
6. i dont know how to hardreset my phone right now,cause i just came to bootloader or to the f secure password

doing a hardreset but bootloader starts? that's very unusual and probably a premiere...
reset in winmo-settings isn't the same as a real hardreset, so it's no surprise it didn't fix your problems.
are you doing it exactly like this?
- power off your phone
- take it in both hands and press the silver keys
- keep them pressed
- press the power-button shortly (as if normally booting the phone)
- i hope you are still pressing the silver keys? (not the power-button)
- patiently wait, keeping the silver buttons pressed
- a white screen should show up, with instructions
- btw, you can now release the silver keys

for a little moment comes the white screen
loading
"no image file"
then it goes back to the bootloader
kovs110
spl-0.78.0000
MicroP1-787
MicroP2-787
Serial
google found this:
"The screen is showing that ou haven't doin' hardSPL, you should do it before flashing ROM. You can read @ XPERIA X1 Developer's sticky note about that. Good luck!
Aftyer you have succeed in hard-SPL will show (If I'm not mistaken it) 0.78.Ollinex (not SPL-0.78.000)"
so i have to find out how to hardspl my xperia,if this a solution
and the guys from f secure anti theft support cant help me

that's normal bootloader-behaviour without kovsimg.nbh on sdcard and no usb-cable attached. so far, so bad.
assuming you ARE trying to do a hardreset as described above (you didn't answer my question) and are not entering bootloader by pressing power - vol-down...
what have you done with your system?!
flash stockrom.
(and btw, you have stock-spl, so don't try to flash a custom-rom)
so i have to find out how to hardspl my xperia,if this a solution
Click to expand...
Click to collapse
no, hardspl is for flashing custom-roms. it has nothing to do with doing a hardreset. but at least you're using search...

mal auf deutsch..
ich halte die silbernen tasten gedrückt,drücke 2-3 sekunden lang power,dann kommt der bootloader dann kurz
loading
"no image file"
und wieder der bootloader
mach ich es genauso wie du es beschreibst ,beide silber tasten gedrückt halten,power kurz antippen,die silbertasten gedrückt halten ,dann kommt kein weißer bildschirm sondern er fährt normal hoch vom sony ericsson symbol bis zu diesem f secure passwort scheiß

okay, then flash stockrom. (no hardspl needed for that)
i don't know HOW you've done it, but you messed up your system real good.
edit:
bummler said:
mal auf deutsch..
ich halte die silbernen tasten gedrückt,drücke 2-3 sekunden lang power,dann kommt der bootloader dann kurz
loading
"no image file"
und wieder der bootloader
mach ich es genauso wie du es beschreibst ,beide silber tasten gedrückt halten,power kurz antippen,die silbertasten gedrückt halten ,dann kommt kein weißer bildschirm sondern er fährt normal hoch vom sony ericsson symbol bis zu diesem f secure passwort scheiß
Click to expand...
Click to collapse
you do realise that this makes no sense at all?!
what now, does it enter bootloader or does it power up normally until the password-prompt?!
but doesn't matter anyway.
flash stockrom and hope that it brings everything back to a working order.

..when i hold the two silver buttons and press power for one second...nothing happens..system starts normal till the f secure password comes
when i hold the silver buttons and the power button long,i came to
bootloader
"no image file"
bootloader
now i search a thread "how to flash stockrom on xperia x1"
and try my best to solve this ****

"silver buttons" - are you talking about the silver buttons on the side of the phone?
because i'm not, i'm talking about the ones below the screen...

oh mann...yes that works...i did a hardreset ^^
the buttons below the scree are black on my xperia x1 and my back cover is chrome-custom made^^
now we will see if the backup stuff works

dude, that's... now come on - seriously?!
you know, forum rules forbid me to write what i really WANT to write...

it works it works...i made a backup without f secure and everything is back
just wimospeed doesnt works. it is on 672mhz but in the device info on 528mhz..maybe i find a solution for that,cause its a little slow right now
BUT
thanks caliban,thanks ultrashot
3 days trouble gone

well, changing speed in sys-info is easy. all you have to do is hexedit nk.exe.
dude, it's not supposed to change. you're fine, everything is right as it should be.
if you run wimospeed.exe, it will show you the real current speed.
edit:
bit of advice, 672 mhz is tricky on x1, kinda on the edge. there are some devices which can run it stable, but for most 652 is max (this is hw-dependant). it doesn't freeze right away, but you might notice some strange behaviour like app-freezes, freezing after 2 days or sudden file-errors. if that occurs, see if it goes away with 652 mhz.
so try it, maybe you're one of the lucky few.

hm i thought settings-info would show the actual prozessor speed when i change it in wimospeed but
prozessor:MSM7200A-528mhz
Speicher:200.73mb

i don't know why you thought that, but it's static.
hardcoded in nk.exe. one can change it, but that includes cooking your own rom, know what you're doing and hex-edit.