Database Develop

QTek 9090 Rom Update Dead

Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny

i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]

Danido said:
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
Click to expand...
Click to collapse
Danny, check my reply at http://www.pocketpc-club.nl/forum/showthread.php?t=45319&page=3
Grtz,
DUTCH

Serial 2.06
dear Danido,
i got the same issue and i got over it.
u need to go to search and find this file:
PDA2k_CDLWWE_11222_169_10200_SHIP
then do the installation while your ppc is in the cordl with power supply.
good luck

helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "

You cant post personal info...
muppet said:
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Click to expand...
Click to collapse
[email protected]
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Reply With Quote
Click to expand...
Click to collapse
Erase your email if you want to share your mail to anybody pm them please. maybe you can find out the answer but if you post here please ask by this way i know is slow... but many people can check the answer if you all post all the process.

[email protected] said:
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Click to expand...
Click to collapse
since you already have a problem, please use windows xp for now.
i would try to actually downgrade to stock ROM first (please refer to wiki to get the correct stock from your device)
secondly, i would try
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

Attempted WM5 Rom upgrade and got stuck!!!

Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx

Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?

I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06

Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.

thanks a lot i ll try it right now been waiting for this

OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you

Big Problem?

I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.

Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.

Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)

That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.

Im not a expert but is vista the problem??

Most likely.

Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated

mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.

thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie

mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....

Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??

Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try

diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!

Need help please

Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBH​KOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again​_Nothing_
Serial​)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings

Try flashing with the sd-card method...

Apfeltorte said:
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBH​KOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again​_Nothing_
Serial​)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Click to expand...
Click to collapse
As per what Lokatho mentioned,
in case you didn't know what it meant:
read that:
http://forum.xda-developers.com/showthread.php?t=445662
hope you could revive your X1.
Cheers!!

hmm ok i´ll try it :/
i hope that it works 'cus my X1 is new >_<

I'd suggest SD Method as well...
Additionally you could plug your X1 (while in three-color-screen, also known as Bootloader) inot your USB and start the RUU again.
Both should work.

@ wolf
I already tried it.
Everytimes the same error code something with connections problems don´t know why yesterday it worked :/

is this solved then?
Mod. edit: not dev related, moved to general

Hspl error check THE picS

HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?

syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl

SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/

syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend

SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message

syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B

SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way

syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture

SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?

syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag

SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)

syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use

SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.

syrian
come on xda help me lol

SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked

syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E

SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?