Database Develop

upgrading xdaIII (qtek 9090 )with italian rom 14004_153_1120

HELP MY QTEK 9090 is totally struck when I eas upgrading I've tryed so many times BUT NOTHINGS HAPPENS!!! I'VE ALWAYS RED ERROR MESSAGE ADN ICAN'T GO BACK!!
CAN ANYBODY HELP ME PLEASE!!
THANKS
:twisted: :evil: :?: :?:

i have any problem like your, what error message you have? win ce image error or anyhink like this?? can you get to bootloader?

Topic moved to BA Upgrading etc.
Did you read this page
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade

no i can't!!!
no I can't the pda is completly dead ti gives me the writings
SERIAL
V2.07
AND NOTHING ELSE!!!
I follow the FAQ suggestions but nothings HAPPENS!!!
HELPME PLEASE!!!!
:evil: :evil: :evil:

1)Take it out off the cradle.
2)Take the battery off, and leave it off for about 20 minuts.
3)Make sure that the USB cable is connected directly to your PC, and not through a HUB.
4)Reboot PC, dont start any programs.
5)Put the battery back on you BA, switch it on and Cradle it
6)Follow instructions in WIKI

it work only in eglish version
Thaks Bosjo but works the english version rom only!!
I've discovered , anso I thank you so much, that exist one italian version only for my qtek 9090 the other one once I've tried it
doesen' t work AGAIN!!, I : was been found the same problem...
I'will follow your suggestions...
:evil: :evil: :?:
thanks
Alexj

[please follow bosjo suggestion if u have an english versio, but I need the italian one it's a big probelm for me to install it...damn...!! :twisted:

bosjo said:
3)Make sure that the USB cable is connected directly to your PC, and through a HUB.
Click to expand...
Click to collapse
****, i made a Typo, it should say
3) Make sure that the USB cable is connected directly to your PC, and NOT through a HUB.
It should work with all the roms. (those on the 1.40 link page)

ti's all ok over there
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:

BAD ROM UPDATE!!
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
I'M REALLY BEACAME NERVOUS..
Any suggestion bosjo??
Please I'm struck again.. :evil: :evil: :evil:

always stuck
Hi my friend after having succes to upgrade my 9090 in english, no way that italian programs, works I've tried to install italian cab files..but. nothings happens.
then I restarted from zero and that'it..
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
and now what should I do please?? The separated files in(verion in WWE) seems not to work !!!!
I'M REALLY BEACAMING NERVOUS..
:evil: :evil: :evil:

Re: ti's all ok over there
alexj10 said:
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
Click to expand...
Click to collapse

Well I am lost now.
You say that you can flash a wwe rom, if so which one.
You say you cant flash the ITA 1.40 rom but you dont tell us how you are trying to flash it.
Best is always to start form the begining.
Get your shipped rom back on the device.
Upgrade the radio .....only
empty out the ext rom....
then falsh the CE...only
and if you need help tell us what you did as it would explain how you got the error message. We have no idea what you are doing thus cant help you much.

The program I've first tried named BA_DT_ITA_14004_153_1120.ship
doesent' work !! So Ive my 9090 completly dead, I've red almost all the instructions but now I really dont'know how to move myself, and I'dont remeber the previuos version because is cancelled.the attemp to update to 1.40; 1.40.153; 1.12.00 always fails
I've tryed many times to run the program above, but the error messge is the same : soft reset and restart....
so really do not be able to
Get your shipped rom back on the device.
empty out the ext rom....
then falsh the CE...only
can u hepl me please ??

Ok lets get a wwe 1.40 on your device. (as I am not sure if the ita is Broken)
Follow :
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
1) Take the IMate rom.
2) Download the rom and the MA file.
On device
1) On your device perform a Hard reset
2) Remove the battery
3) Wait 5 mins
4) Put battery in again
on PC
1) Reboot your PC after download
2) Make sure the cradel is connected to your PC with no hub.
3) Turn on device
4) Place it in cradel
Run the upgrade
chose the:
First Method (Quick/Easy) (TYPE II)
Post what happens

country error
thanks for the attempt but the message is country error ...
:evil:

country erroro
[
I've done but..
thanks but the message is :country error....
with the old method applicated at your concept the message is ROM error....and now what's up :?:

What exe are you runing : Name of that file!

file name
the file name is rom 1.13.00
but in th e italian vrsiona the name is ns and anothe rone is nk
Sorry but I'm not so expert mybe isould try the secon method downloading separate file s..??
thanks again.. :?:

There is no file name 1.13.00.exe !

6510b blocke during upgrade rom

Hi! i've tried to load italian rom on m 6510b like i read on this forum but the proces blocked! now phone after HardReset load old configuration and during this proces stop on image of hp that wrote SERIAL on top and v0.21 down.
What can i do? there is a solution or i must send it to hp? thanks

--------------------------------------------------------------------------------
the problem was................windows VISTA!!!!!!!
pc with os xp did rom install

Have you called to HP technical service?

really i've tried to do but they have not reply to my email.

settems said:
really i've tried to do but they have not reply to my email.
Click to expand...
Click to collapse
Can your 6510 get into bootloader mode?

qtek 2020i Stuck Help Needed

Hello Guys,
I found this Forum after a long search.I have a qtek 2020i and when I was trying to upgrade the ROM it all went dead and it shows on screen as usb or serial v1.01. I dont know what to do Iam desperate.Someone told me to flash the ROM ,
1.How do I Flash the ROM , what is the procedure
2.And then how do I proceed so that my QTEK works and iam ready to use it and make calls.
I would be really Greatetful if someone can help me out here . My email is [email protected] or you can post the reply here too.Please Help
Emmanuel

emmany said:
Hello Guys,
I found this Forum after a long search.I have a qtek 2020i and when I was trying to upgrade the ROM it all went dead and it shows on screen as usb or serial v1.01. I dont know what to do Iam desperate.Someone told me to flash the ROM ,
1.How do I Flash the ROM , what is the procedure
2.And then how do I proceed so that my QTEK works and iam ready to use it and make calls.
I would be really Greatetful if someone can help me out here . My email is [email protected] or you can post the reply here too.Please Help
Emmanuel
Click to expand...
Click to collapse
1: make sure your pc is NOT running vista, u can only run a rom update on a XP pc
2: if running xp, just run the update again it somtimes stalls but it will work the second or third time, it did this to me on my first update. it will take about 20-30mins
as for the rom just download one in the 2020i threads and run it

Error 246 Device not responding

I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.

I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks

wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67

wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!

wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...

Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo

Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...

Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more

thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo

Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)

Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo

fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help

I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk

Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome

I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb

O2 XDAIII Problem WM Cube Updating

http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me

lestera_rpg said:
http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me
Click to expand...
Click to collapse
sounds like your running vista, search for it here, there is athread that will help you.

neilhhardy said:
sounds like your running vista, search for it here, there is athread that will help you.
Click to expand...
Click to collapse
No I Have XP With SP2 by the way my FireWall is turn off

i think it´s an Artemis mobile 6 rom.
you can´t take a rom from an other device.
you have to take a rom for blue angel
(you can find correct roms here:
http://forum.xda-developers.com/forumdisplay.php?f=386)
hope that help
(p.s. don´t forget to update radio first !!!)

Wmvfan is correct, the ROM you linked to is not for a blue angel. You are lucky you were not able to flash that ROM to your phone, you would have had a paper weight if you did.
Read the wiki for information on flashing.

Yes it is right it was another PPC Rom But now I`m not incorrect http://forum.xda-developers.com/showthread.php?t=382909 it is really for my Blue Angel but i have same problem

(p.s. don´t forget to update radio first !!!)
Click to expand...
Click to collapse
that should solve the problem.

Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That

lestera_rpg said:
Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That
Click to expand...
Click to collapse
From the XDA Blue Angel wiki, How to upgrade to the latest Radio ROM version (currently 1.15.00):
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade