i jus flasheed the open touch vista biggie..i was just looking through it and it reset on me and it keeps going through a reboot loop...and wont stop??? any input on this??? and i really need my fone..
edit: i took the memory card out and the phone stopped rebooting but now its non responsive it wont let me do anything at all the touch screen and the keys dont work..and it shows that i have no service...i really need some help..
flash to a different rom.
I just flashed to it earlier today and had problems until I removed the SD as well... If you reflash it w/o the SD in the phone, you should be good... Mine is working fine.
Use a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
Related
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
Hey guys i'm coming across an issue with my phone and its really inconvinient. Im using the wing on VW6.0 and im loving it. I have HTC touch and a couple appls on there. But right now I cant seem to reboot my phone with my memory card it. THe phone just keeps rebooting and rebooting. ONce I remove the memory card the phone boots up and loads like normal. Then I can place the memory card back in and it works fine. Is there something....ANYTHING I can do to prevent this from happening in the future. Im really not wanting to do a hard reset of the phone. Please help.
Try using a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
duprade said:
Try using a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
Click to expand...
Click to collapse
oh thanks Duprade, appreciate the help man. Also i've noticed with a lot of the newer roms you there is more options such as REBOOT and what not. And I was wondering if their was a cap that just added some extra menu options like that? But thanks for the help it booted up flawlessly.
Oh and also liked the way Messages are threaded together in 6.1. Is there a cab for that by any chance that works really well. I just got one but it isnt the greatest.
duprade said:
Try using a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
Click to expand...
Click to collapse
I tried this... it worked for its intended purpose but now my wing has no sound. None of the sounds play. It just vibrates. Anyone else having this problem?
Beast84 said:
I tried this... it worked for its intended purpose but now my wing has no sound. None of the sounds play. It just vibrates. Anyone else having this problem?
Click to expand...
Click to collapse
No sorry man. I did it and everything seems to be working just fine on my end. I dont have a problem whatsoever, just like it was before.
Nevermind it works now. I restarted my phone again & it worked like a charm!
i have a wing and i tried this rename and it still wouldn't reboot with the card in
after the rename it did replace the file with a new one from ROM but still the same problem no clean reboot with card in
any idea what i should do?
thanks
i had a similar problem, but it was because i overclocked the device to a limit that it couldnt handle. however i did the same thing by removing the memory card to allow the device to boot. after that happened, i uninstalled the program(battery status), then i rebooted with memory card inserted. phone was working well, then i installed battery status once again but not making the same mistake by overclocking too much. hope this helps.
duprade said:
Try using a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
Click to expand...
Click to collapse
I can't rename it. "Cannot rename file "omap850_sdhc.dll" Access denied" message appears. So its in ROM. How can i rename it?
blahh..what the heck !! mine just did the same thing for the past 10 minutes. Once I removed the storage card and soft reset it works again..strange..
Any solution so far?
I got the latest garmin XT from the garmin site for my Tilt, and ran the installer on my pc. usually, when i put the memory card into the device, it automatically pops up with a window and asks me if i want to install it and where.
not this time though. and now i cant figure out how to actually install it. every file that i pick from the garmin files on the memory card doesnt actually install it properly. it doesnt show up in the programs screen, nore does it even come up in the manage programs screen. it works, but i have to use file explorer to actually launch the exe. its not really installed!
im using the L26 V8 lite rom.
please help!
I had the same problem on my tilt, I am using death v4 for my rom. I thought that I accidently downloaded the nokia verson or something cause nothing looked normal after it "installed". I don't know what to do either
working on dutty
Just info really...i'm on dutty's June release and Garmin installs and functions fine. You might want to consider this plus the latest SPL with being ROM being very smooth.
i have the latest hardspl. dutty's latest releases are too buggy.
just tried it with L26 V7, same.
No one knows how to properly manually install??
Did it create a folder on your storage card called 2257? If so, is there an autorun file in there?
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
aphexacid said:
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
Click to expand...
Click to collapse
hmm thats odd.. are you sure you have all the right files in the Garmin folder on your card?
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
Click to expand...
Click to collapse
Take your storage card out, then put it back in. Does autorun start?
Hi all,
I have recently flashed a new rom onto my Kaiser and have since had loads of problems with the OS. It will flash fine and runs fine for the first half hour or so then the problems begin.
Programs will fail to open saying that they are not installed, when I go into file explorer or total commander I am unable to access the "program Files" folder on the device. At this point the system then starts to run slow and eventually crashes, upon rebooting it'll do a hard reset and I'm back to the beginning.
I have had a white screen twice on rebooting stating something like the OS or file are not accessiable press any button to hard reset. I am wondering if the internal memory is knackered?
Is there anyway of testing the internal memory? Like a windows check disc for windows mobile?
If anyone has any ideas and has a solution I would be grateful.
Cheers
Blinky
Radio 1.71.09.01
Prot Ver 25.75.40.02.eMoH
Rom shifu_4.2 WWE
Try flashing a stock ROM first, then reflash with your intended ROM.
Cheers mate, worked a treat. Never needed to do that before but will remember it from now on.
Thanks again.
Blinky
Hello
After a couple of days of hunting a new update for my new phone, I got to a dead end.
After trying multiple ways (most of them are from here so I will post only 2-3 links): http://forum.xda-developers.com/showthread.php?t=732362 , http://forum.xda-developers.com/showpost.php?p=3695364&postcount=4 , http://forum.xda-developers.com/showthread.php?t=416211 , the problem was the same. After sync and starting installation via USB (phone freezes) and SDcard (phone freezes automatically with starting Heret.exe) I don't know and really can't find a way how to remove WM6.5 (and put android) or someway update or install a fresh version.
I hope someone will be willing and able to help me with this problem.
Thanks in advance.
Dude, what *exactly* is your issue? From what I can see, you're trying to install android and it's not working for you..
Either way, first, format your SD before trying anything. See if that will get your phone to respond. If not, get a new one. The problem with SD cards is, when they fail (or get corrupted), it can cause your phone to "almost freeze". Instantly fixed by removing the SD. And booting the phone without it usually allows the phone to work normally.
The SD is brand new (4GB), and I also tried with 5 other SD cards (2 and 4 GB's).
I don't think it's to the SD card's, its more to the damn phone and I have no clue how to reinstall WM or put Android on it. And that the issue, how to prevent completely freezing while sync via USB and boot from SD card.
Hope you understand better now neocyke
Well, honestly dude, a T5388 is not exactly a TD2, so, what would work on an actual TD2 might not for you. Based on my experiences with clones, best is to flash with no SD in. Try visiting this thread and use the ROM there. Get the IDT flasher and work your way from there. Oh, and you might wanna remove Activesync or WM Device center before flashing.. Good luck with that..
As for android, installation for XDAndroid is the simplest thing in the world. Just unzip the FRX06 zip file to a folder (andboot is usually used). Take the topaz startup and put in the root of that folder (remember to edit as needed). Then copy *the entire folder* and dump it on the root of your SD. Run Haret from WM and that's it. Just wait for it to boot.. But then, this is assuming that your phone is supported by XDAndroid of course. You might wanna check that in the android dev section..