Hi all,
I have recently flashed a new rom onto my Kaiser and have since had loads of problems with the OS. It will flash fine and runs fine for the first half hour or so then the problems begin.
Programs will fail to open saying that they are not installed, when I go into file explorer or total commander I am unable to access the "program Files" folder on the device. At this point the system then starts to run slow and eventually crashes, upon rebooting it'll do a hard reset and I'm back to the beginning.
I have had a white screen twice on rebooting stating something like the OS or file are not accessiable press any button to hard reset. I am wondering if the internal memory is knackered?
Is there anyway of testing the internal memory? Like a windows check disc for windows mobile?
If anyone has any ideas and has a solution I would be grateful.
Cheers
Blinky
Radio 1.71.09.01
Prot Ver 25.75.40.02.eMoH
Rom shifu_4.2 WWE
Try flashing a stock ROM first, then reflash with your intended ROM.
Cheers mate, worked a treat. Never needed to do that before but will remember it from now on.
Thanks again.
Blinky
Related
I was just wondering wether everyone has a BAD NETWORK SIGNAL or rather Weak signal on their Alpine. cuz i hv that and i got mine yesterday and i'm fiddlin round w it. and wondering if this'll cause me problems w conversations:/
ps: if i turn phone to standby(via power button??) -> phone gos off right? so how do i save battery and have th ephone on???
PLEASE REPLY ASAP
Which radio version are you running? May help to upgrade that to 1.04.00 to get a better signal.
The phone will automatically switch on if you receive a call !
hth,
Max
Imate- PDA2
This is what i'm running:
I-mate PDA 2
ROM version: 1.11.00 WWE
ROM date: 01/27/05
Radio version: 1.03.00
Protocol version 1337.42
ExtROM version: 1.11.144 WWE
its the latest off the i-mate website. or do u suggest another rom update from smwhere else? cuz the thing is that i'm also running arabic, so i don't want 2 lose that no matter what u know. any suggestions?
hi demiseh,
please do backup using such as Sprite Backup before upgrade........
http://www.klstore.com/mael/Radio 1.04.rar
this file just included Radio 1.04 upgrade only for Alpine.
restore back the backup so that you dont lost anything.....
thanks
As clustered said you should do a full back with a software like "Sprite Backup" before you start applying the new Radio Version 1.04.00, as it will hardreset your device and all data will be lost.
Go to ftp://xda:[email protected]/Uploads/Alpine and download XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar . Extract the file to a folder of your choice. Then DELETE files ms_.nbf and nk.nbf from that folder, only leave radio_.nbf in place.
Connect your device to the PC via ActiveSync, then start MaUpgradeUt_noID.exe , it will not run through completely, after a while it will get stuck. Kill the MaUpgradeUt_noID.exe via Windows task manager, while leaving your device connected. Then restart MaUpgradeUt_noID.exe, the second time the update will go through.
After you finished, restore your Backup.
You will not lose your specific language settings.
hth,
Max
WoW! Thanks Alot Guys!!
Wow Thanks Guys!! I'll Do That!
not now actually, but this evenin i'll do it and let u know how it works cool!
Problem With Restore
upgrade done minor problem with restore from SD card... ---> at killing processes it freezes on 10seconds:/ why? any ideas?
umm, no idea! were you able to restore though anyway?
thx god yes! just now did it.
ok, here's the thing i dont understand:
1. afet hard reset - all data restored from the beginning
2. --> if all data lost -> then what happens to the available copy of Sprite Back-up on the device? its also lost correct? though i had it installed on my SD card, so its technically there, but not visible by the Device.
3. i click on the file, to load from SD card and auto-restore my device, and evrythin theoretically works fine except it freezes.
how did i fix it?
1. didnt work from PC, dunno why.
2. so what i did was install sprite back-up again, obviously crack it, and restore it manually from there ---> what happened? ---> FROZE AGAIN
3. so once i had the sprite back-up already installed once again (step 2), i just restored from the PC and this time it worked...weird...dunno what happened, what went wrong, but i was freaked out for a second & was goin2 rip my hair out. how do u guys restore? from PC or from PPC? and do u do it via the Sprite application or just by clickling the file on the PPC? more info needed hope it wont happen soon
It's probably one of the process started via the autostart that is has problems killing, try moving some things from \Windows\AutoStart to a backup folder some place, then reboot your device - try restore again - if it runs through copy the things you moved back into \Windows\AutoStart
hm...interesting. but here's another fact:
i was running in advanced mode::: i had also tried disabling the 'process kill' feature, and still at 10Seconds it froze for some reason....i dunno. i deleted the old backup on the sd, and i'm creating a new one. then i'll make a new back-up on the PC, and try restoring it once more both ways to figure it all out. freaky still
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
i jus flasheed the open touch vista biggie..i was just looking through it and it reset on me and it keeps going through a reboot loop...and wont stop??? any input on this??? and i really need my fone..
edit: i took the memory card out and the phone stopped rebooting but now its non responsive it wont let me do anything at all the touch screen and the keys dont work..and it shows that i have no service...i really need some help..
flash to a different rom.
I just flashed to it earlier today and had problems until I removed the SD as well... If you reflash it w/o the SD in the phone, you should be good... Mine is working fine.
Use a file explorer (Total Commander or Resco) to rename \Windows\omap850_sdhc.dll to omap850_sdhc.dll.old and reboot.
Hi I've run Haret.exe to install gingerbread (latest install for topaz) I got it all in the bundle that was just released. I ran Haret once and Android ran just fine for a while, I tried running google maps and then it froze. I restarted the phone but Haret wont start again.
the message that shows up is"
the file 'haret' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I re-copied the file from my laptop but it still doesn't work....
sorry I'm a bit of a noob when it comes to this stuff
Haret Doesn't Run....
OKay, so here's some more information on my situation.
I have an HTC Warhawk (technically Topaz i believe) from AT&T running WinMo 6.5
I've run Haret after extracting the bundle below to my sd card
Gingerbread Bundle (2.3.3 with Camera)
(I can't post outside links Sorry its in TheJokah's post found here:
http://forum.xda-developers.com/showthread.php?t=509493&page=603
Haret Ran and installed android successfully and after running google maps (not sure if that is actually related) it froze so I took out my battery to reset it.
I then tried to start Haret again and it won't run and gives the aforementioned message.
I've read other posts around the web including ones on PCC and tried soft Reseting it by pressing the small button under my stylus holder...
it still doesn't run and gives the same message.
plz help!
okay now i tried hard reseting and it ran again! sorry for the trouble..I fixed it myself.
how u fix it