Related
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
ROM Development Thread
UndertoW said:
Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
Click to expand...
Click to collapse
Have you searched in the Raphael ROM Development thread. I believe this is covered in that thread.
I did check the forum and an extensive google search with no useful information found......not that it's not there.....just that i could not locate it.
Any specifics or a link would be much appreciated.
thanks in advance
Rinse and repeat.
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
mcspikesky said:
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
Click to expand...
Click to collapse
I tired it about 4 or five times...all with the same error code.
do you know where i can find these appropriate threads?
thanks in advance
Still looking for some advice help bump
I am having the same problem with the same Vista set-up. I've even tried running the RUU and Windows Mobile Device Center in compatability mode, with no success.
Ok, I just figured it out. do not start the Mobile device center in Vista. Just make sure that the phone shows up as a device under my computer. took about 10 seconds to flash after that. (and I had the sim and sd card removed for good measure).
Thank you very much...i'm now up and running 4.5 and love it.
Thank you dkevinscott very much for you time and help!
how to flash my htf fuze.
hi, is anyone can get me a hand to flash my htc fuze, thankyou very much.
I'm still getting this error.... anyone have a work around? I have XP
i had same problem it came down to qualcomm drivers .no workaround for me just used vista
ITT: People who refuse to spend 10 minutes reading for themselves
Same problems
Hi there,
I have a Xperia X1 and i'm trying to upgrade to 6.5 aswell.
Everytime i launch the exe file (Kovsky customRUU) it'll give me a 262 error.
I'm running vista and didn't run mobile center.
The X1 appears in my explorer though.
But still. It's a nogo.
Pls help
HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
i had this exact same error. this worked flawlessly. thanks!
xidesu said:
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
Click to expand...
Click to collapse
work!!
man i spend two days without sucess.this working .thnx
Hi all,
I have recently flashed a new rom onto my Kaiser and have since had loads of problems with the OS. It will flash fine and runs fine for the first half hour or so then the problems begin.
Programs will fail to open saying that they are not installed, when I go into file explorer or total commander I am unable to access the "program Files" folder on the device. At this point the system then starts to run slow and eventually crashes, upon rebooting it'll do a hard reset and I'm back to the beginning.
I have had a white screen twice on rebooting stating something like the OS or file are not accessiable press any button to hard reset. I am wondering if the internal memory is knackered?
Is there anyway of testing the internal memory? Like a windows check disc for windows mobile?
If anyone has any ideas and has a solution I would be grateful.
Cheers
Blinky
Radio 1.71.09.01
Prot Ver 25.75.40.02.eMoH
Rom shifu_4.2 WWE
Try flashing a stock ROM first, then reflash with your intended ROM.
Cheers mate, worked a treat. Never needed to do that before but will remember it from now on.
Thanks again.
Blinky