Kaiser 'full press' camera bottom not working / problem - Tilt, TyTN II, MDA Vario III General

Hi, I can't enter the camera application by full pressing the camera bottom, neither can I take pictures by doing so. I do not know if I it is a hardware problem or a software problem. 'Half press' allows me to take pictures changing the camera settings, and I must click on its icon to enter the camera app.
Is there any way to remap the camera bottom on 'Settings/Buttons'? or in any different way? If so, I will be able to set the 'full press' to any other function/app and see if it is a hardware problem or not.
I read some posts with same problem but couldn't find any solution, thanks in advance. Alejandro.
HTC TYTN II
Dutty's ROM [Mar 08 08]Official WM6.1 5.2.19199 UC RTM
Radio ROM 1.64.08.21
Camera 5.04 (Build 29195) with lastest Nadavi fix (08.03.08)

alehardware said:
Hi, I can't enter the camera application by full pressing the camera bottom, neither can I take pictures by doing so. I do not know if I it is a hardware problem or a software problem. 'Half press' allows me to take pictures changing the camera settings, and I must click on its icon to enter the camera app.
Is there any way to remap the camera bottom on 'Settings/Buttons'? or in any different way? If so, I will be able to set the 'full press' to any other function/app and see if it is a hardware problem or not.
I read some posts with same problem but couldn't find any solution, thanks in advance. Alejandro.
HTC TYTN II
Dutty's ROM [Mar 08 08]Official WM6.1 5.2.19199 UC RTM
Radio ROM 1.64.08.21
Camera 5.04 (Build 29195) with lastest Nadavi fix (08.03.08)
Click to expand...
Click to collapse
schaps advanced config will remap the buttons

Thank U for your prompt answer P1Tater. I've already tried ACT, but I could not find an option to remap the camera bottom, just for left and right softkey, power key, end key, and send key. Regards.
Alejandro.

try
start/settings/buttons

P1Tater said:
try
start/settings/buttons
Click to expand...
Click to collapse
There I have only
Botton 1 (Internet Explorer)
Button 2 (Messaging)
Button 3 (Start Menu)
Button 4 Press & Hold (OK/Close) - OK icon
Button 4 (None) - but cassette icon
Button 6 (Voice Speed Dial) - mic and phone icon
Button 6 Hold (Record) - same cassette icon
I think something messed up with this, there is no 'button 5', this should be the camera button?
Thanks again.

alehardware said:
There I have only
Button 4 (None) - but cassette icon
Click to expand...
Click to collapse
change that one to camera.

Problem solve / Thanks P1Tater for your help
P1Tater said:
change that one to camera.
Click to expand...
Click to collapse
Wonderful!!! problem solve ... as simple as you said. Do you have PayPal, I would like to send you a couple of bucks so you can drink a beer/coffee/coke at my expense? I live in Argentina, so it won't be much, but I would like to thank you.
Regards.

alehardware said:
Wonderful!!! problem solve ... as simple as you said. Do you have PayPal, I would like to send you a couple of bucks so you can drink a beer/coffee/coke at my expense? I live in Argentina, so it won't be much, but I would like to thank you.
Regards.
Click to expand...
Click to collapse
youve done enough just by saying thank you. the sentiment is appreciated anyway. However if you still feel the pressing need the link is in my sig. But there is really no need.

Related

Using Button 5 press & hold to toggle vibrate/ring

Herald Hackers,
I've noticed that some roms do not have the button 5 press & hold function assigned and some have it assigned to Voice Speed Dial or VoiceCommand or to toggle vibrate/ring.
I've searched through the forums off and on for months now and I haven't come across a way to change the function on the wing to toggle ring/vibrate... except the vibraswitch program which messes with the radio. I've tried CommButton-Toggle-Vibrate-Fix.CAB and others as well but they don't seem to override the setting that's cooked in.
Does anyone know how to change this?
Many Thanks!
mikenaustin
Hi,
My question is did this work with the original tmobile rom?
ttran001 said:
Hi,
My question is did this work with the original tmobile rom?
Click to expand...
Click to collapse
ttran,
I don't think so. I use your 2.6 ROM but I used to use TouchIT where it was cooked so that button 5 toggled vibrate/ring.
Thanks!
mikenaustin
mikenaustin said:
ttran,
I don't think so. I use your 2.6 ROM but I used to use TouchIT where it was cooked so that button 5 toggled vibrate/ring.
Thanks!
mikenaustin
Click to expand...
Click to collapse
This will be added on the new updated relase v2.8.
The Tmobile ROM doesn't have it by default. But the Herald ROM does. Ttran, PM me with the registry keys if you have them.
Thanks
Thanks ttran! You Rock!
Can't wait for 2.8!

Missing video call button after instaling zombie's dialer skin.

I used zombie's dialer skin for my htc tytn 2 and it worked. But I'm missing the video call button. I attached an imagine.
Anyone who can help, please do. I'd appreciate it
Come on guys, help a brother out
CraZyLiLbOy said:
Come on guys, help a brother out
Click to expand...
Click to collapse
some dialers dont have video call button.
CraZyLiLbOy said:
I used zombie's dialer skin for my htc tytn 2 and it worked. But I'm missing the video call button. I attached an imagine.
Anyone who can help, please do. I'd appreciate it
Click to expand...
Click to collapse
Go into your settings to see if VideoTalk is enabled.
Registry Setting your looking for..
"HKLM\Drivers\BuiltIn\RIL" : EnableVT 0 = NO 1=YES
See if this helps
ryncppr said:
Go into your settings to see if VideoTalk is enabled.
Registry Setting your looking for..
"HKLM\Drivers\BuiltIn\RIL" : EnableVT 0 = NO 1=YES
See if this helps
Click to expand...
Click to collapse
Yes, I have it enabled. I have't flashed any rom. I'm using the official rom that comes installed with the phone.
so nobody knows?
CraZyLiLbOy said:
so nobody knows?
Click to expand...
Click to collapse
man, as I said, some dialers dont have video call button. U know that the tilt dont have front camera so they dont need a video call button on their dialers. So if the dialer is from someone who uses tilt, there is probably no button.
Are u sure this dialer should have video call?
how many dialers have you tried and how many of them had a video call button?..
afaik that dialer has not videocall button
Look here I've installed one of his dialer skins with video call button
have you tried the video screen thing too??
I lost video call icon after upgrade..please help me

remap Hardkeys not working !

Hello, me again,
is there any possibility to use all the hardkeys on the diamond ?
In the settings, keys, there is only button 1 (hold) shown, nothing else.
I tried several hardreset up to now, i tried not to install touchflo i tried abbuttonplus. Every time the same, only ONE button is customizable !
Is this due to HTC branded the windows mob6 ?
THX,
chra
Try AE Button Plus
Hi Kareem,
as i wrote i already tried AEbuttonplus and i can see only the same one button its button 1 (hold). I think its locked by HTC. It is the O2 XDA ! Has anyone else the same problem? Is it possible that the only way is to flash another rom ?
THX
chra
Chra said:
Hi Kareem,
as i wrote i already tried AEbuttonplus and i can see only the same one button its button 1 (hold). I think its locked by HTC. It is the O2 XDA ! Has anyone else the same problem? Is it possible that the only way is to flash another rom ?
THX
chra
Click to expand...
Click to collapse
AE button plus doesn't changer the default mode of setting buttons.
It has its own settings dialog. It worked for me.
Read instructions!!!
Does HButton 2.3 also work ... anyone tried that?
Hallo again,
is this topic already solved ?
I cant understand that nobody has the same problem?
Is the fact that i cant use MY OWN BOUGHT buttons as i want it, to normal for anybody ?
Im confused,
THX
Chra
It is not solved for me.
All I want is for my HOME button to bring up the Start Menu. This was easy to do in the pocket pcs I used to own. Surely there must be a way to do this on the Diamond?

PDAViet V12 MWC wm 6.5 rom?

I've seen some screenshots over @ the PDAViet website, and the v12 has a screen vaguely resembling the one that was shown @ MWV, but it looks kind of wonky so its possible the photo was just taken from screenshots around the place.
Has anyone tried the PDAViet v12 6.5 rom? Do you know if it actually incorporates any of the features or is similar to or based on the rom shown @ MWC?
DRTigerlilly said:
I've seen some screenshots over @ the PDAViet website, and the v12 has a screen vaguely resembling the one that was shown @ MWV, but it looks kind of wonky so its possible the photo was just taken from screenshots around the place.
Has anyone tried the PDAViet v12 6.5 rom? Do you know if it actually incorporates any of the features or is similar to or based on the rom shown @ MWC?
Click to expand...
Click to collapse
Download it and try out.
can anyone post a link to download, i try to register in the forum but i can't!!!
the language is kinda hard
mig_l said:
can anyone post a link to download, i try to register in the forum but i can't!!!
the language is kinda hard
Click to expand...
Click to collapse
I can but only PM. PQ doesn't want publicity!
PanNet said:
I can but only PM. PQ doesn't want publicity!
Click to expand...
Click to collapse
Oooops I guess he changed his mind.
Is it worth upgrading to this version over Davideuck_6.5_V-2 version? Is there any difference or should we just wait for Davideuck new release that he is working on.
Don't have my HD yet, still waiting for it to be delivered
Also the forum can be changed to english via a drop down box at the bottom. For registration, the posts are still in vietnamese.
DRTigerlilly said:
Don't have my HD yet, still waiting for it to be delivered
Also the forum can be changed to english via a drop down box at the bottom. For registration, the posts are still in vietnamese.
Click to expand...
Click to collapse
I din't see that....I used googe translate. I'll go back and see if the translations are still a bit googled thorugh onsite Eng selection.
edit: actually google translate is much better.....learn something new everyday.
100th post...SENIOR MEMBER!!
audscott said:
100th post...SENIOR MEMBER!!
Click to expand...
Click to collapse
Nice one, keep up the posting.
it's already posted here
http://forum.xda-developers.com/showpost.php?p=3350560&postcount=265
sorry for double posting.........
audscott said:
Oooops I guess he changed his mind.
Click to expand...
Click to collapse
Hi,
You’re not quite. It seems WM6.5 is illegal at the moment.
This rom seems to have the ring tone problem, no sound... You can select an alarm sound from the top of the list though.
Ok, it seem to be *.wma files it can't play and MP3. WWAV files are fine.
seal said:
This rom seems to have the ring tone problem, no sound... You can select an alarm sound from the top of the list though.
Click to expand...
Click to collapse
Hi,
Strange, I don't have any problems with sounds. Everything works OK.
Ok, My Bad..... Reset and the sound is working now.... with all audio.
I have reset before reporting this problem.....
My answer, hangup, home and back buttons don't work, if I press them they just activate the soft key on the screen above them, anyone have this issue.
seal said:
I have reset before reporting this problem.....
My answer, hangup, home and back buttons don't work, if I press them they just activate the soft key on the screen above them, anyone have this issue.
Click to expand...
Click to collapse
TouchFlo was removed from this version, I don't know if it has something to do with the back button, but I confirm I have the same behaviour.
By the way is there a .cab to install TFLO 3D to this ROM?
Otherwise it's working good so far, TT7 installed, no prob to sync with exchange server
pierrelp1 said:
TouchFlo was removed from this version, I don't know if it has something to do with the back button, but I confirm I have the same behaviour.
By the way is there a .cab to install TFLO 3D to this ROM?
Otherwise it's working good so far, TT7 installed, no prob to sync with exchange server
Click to expand...
Click to collapse
How are you finding using the phone, I suppose we really don't even need the bottom hardware buttons, everything is able to be done with the software.
The phone part works good so far.
I don't have any complain.
back arrow works, and phone pickup and hangup can be used to select any soft menu loacated above them.

Button 1 (Hold) Doesn´t work

Hi
I´m trying a new rom (WM 6.1 with iPhoneToday) in my HTC Diamond and It´s perfect, but a have a big problem, the Button 1 (hold) (Answer key) doesn´t work, I usually set this button to rotate the screen, but now, no matter what fuction asign, (Accept/Close, Open a program....), I make a soft reset after changing de configuration, and the configuration is ok, but It doesn´t work.....
I´ve been searching a lot, but I didn´t find the answer...
Thanks and sorry for my english...
gtavo said:
Hi
I´m trying a new rom (WM 6.1 with iPhoneToday) in my HTC Diamond and It´s perfect, but a have a big problem, the Button 1 (hold) (Answer key) doesn´t work, I usually set this button to rotate the screen, but now, no matter what fuction asign, (Accept/Close, Open a program....), I make a soft reset after changing de configuration, and the configuration is ok, but It doesn´t work.....
I´ve been searching a lot, but I didn´t find the answer...
Thanks and sorry for my english...
Click to expand...
Click to collapse
I think I've seen somewhere that new version of one program solves "Answer key problem". Maybe S2U2? Or Showcase?
Do you have one of these programs?
Yes, I use S2U2, I´m going to have a look to the new version....
Thanks
I've found it!
"fixed the long press Answer key problem introduced by v2.22.
if the long press Answer key function still cannot be assigned normally, stop iLock2 & then delete the \windows\long_send.lnk first"
http://67.43.3.117/~acs2co/S2U2-changelog.html
thanks cyberdemonVZ, but it didn´t work..., I followed the instructions, but still doesn´t work....
Thank you very much anyway...

Categories

Resources