I love this bluetooth headset. I was in a really noisy resturant, my friend could not even hear the noise on the other end. This jawbone has some serious noise cancelling technologies. Then I went into the bathroom where the music was insanely loud (mexican mariachi stuff) and still friend couldn't hear any music at all.
Weird but cool.
But when I press the button on my headset to hang up a call, it tries to open up the voice recorder/voice calling app on the tytn2. Very annoying.
Do any of you know how turn off this feature? I just want to stop the call. Thanks.
All I can say is that it isn't normal behavior...sorry.
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
RemE said:
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
Click to expand...
Click to collapse
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
deeznuts said:
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
Click to expand...
Click to collapse
You using stock ROM or custom ROM?
this happens to mine as well. From what I've observed, it seem like a delay of some sort when you press the button to hang up, and then the call has already hung up on the other end, and instead of hanging up the call, the phone will just turn on the voice dialer.
it is almost certainly what fakts13 posted as a cause. I've never seen mine launch the voice recorder when hanging up from a call.
It is exactly what fakts13 said. A single button press on the Jawbone can answer or hang up a phone call, but it will also activate voice dialing if no phone call is active. The only problem that you are experiencing is that your other caller is hanging up before you, so there is no active call whenever you press the button on your Jawbone. Since there is no active call, the button press launches Voice Dial on your TyTN II. You could always disable Voice Dial altogether if you never use it.
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
I've had this happen to me on both of my 8525 (Schaps WM6-3.60a) and Tilt (HTC Rom) loaded with SPB Pocket Plus 4. Majority of the times when I answer a call, whether if it's using my Jawbone headset or directly from the device, I'll hear a series of notification sounds. Sometimes these are notifications that visual pop up on the screen and have happened in the past. Some are just sound notifications without any visual pop-ups. They only happen when initiating a call (both incoming/outgoing). Sometimes I'll notice that these are notifications of reminders that never appeared on screen, but seem to come up whenever there is a call. Anybody experiencing this?
me but not exactly.
if im using my itech clip II mini it will not answer immidiately, ill hear a weird sound possibly a notification-type sound and sometimes a half second of the caller's voice will be transmitted over speakerphone! The latter part is completely unacceptable!!
Hi there! I have the same problem as number #1. Have not figured out why. - It happens rarely. It does'nt seems to have any connection with which programs I am running, but have'nt given it alot of thought. Will have a look at the device next time it occur.
does anyone try to record calls with the diamond?is it record both sides?
I could record both sides with speakerphone on... not with bluetooth handsfree or 'normal' phonecall... and if the screen shuts down the recorder stops...
Would be nice with a 'record' button when you make a call
EDIT!: I found this app... AudioNotes, still have to use 'Speaker on' but it starts recording when u make a phone call... (and stops when u hang up)
http://vitotechnology.com/en/products/audionotes.html
NisseDILLIGAF said:
I could record both sides with speakerphone on... not with bluetooth handsfree or 'normal' phonecall... and if the screen shuts down the recorder stops...
Would be nice with a 'record' button when you make a call
EDIT!: I found this app... AudioNotes, still have to use 'Speaker on' but it starts recording when u make a phone call... (and stops when u hang up)
http://vitotechnology.com/en/products/audionotes.html
Click to expand...
Click to collapse
Can HTC Diamond record calls without use speaker?
mandargon2 said:
Can HTC Diamond record calls without use speaker?
Click to expand...
Click to collapse
Nope, sorry.
NisseDILLIGAF said:
I could record both sides with speakerphone on... not with bluetooth handsfree or 'normal' phonecall... and if the screen shuts down the recorder stops...
Would be nice with a 'record' button when you make a call
EDIT!: I found this app... AudioNotes, still have to use 'Speaker on' but it starts recording when u make a phone call... (and stops when u hang up)
http://vitotechnology.com/en/products/audionotes.html
Click to expand...
Click to collapse
Also, there are a lot of other, similar solutions; most importantly, Resco Audio Recorder.
Make sure you read my related reviews & articles.
not recording the other side is a hardware limitation, or vito doesnt do it?
does resco record the other person?
kourampies said:
not recording the other side is a hardware limitation, or vito doesnt do it?
does resco record the other person?
Click to expand...
Click to collapse
1, hardware limitation. read my articles, I've explained this several times
2, nope
as the previous poster said it comes right down to what the hardware can and can't do.
Unfortunately it wasn't possible on the hermes either. It is possible on some other pdaphones (not any htc that i'm aware of). I had hoped they'd fix it for the diamond...unfortunately they haven't.
The most annoying thing about this for me is it prevents the development of an answering machine program (like a voicemail on your handset) which would be great as it would save you from having to PAY for call to your opperator's service.
Mind you that's also probably one of the things that motivates HTC not to design the phones to be capable of doing this.
It is very annoying.
I use Vito Audio Notes. I also use BT (Sony-Ericson). My previous phone's speaker/mic broke so the only way I could talk on the phone was through BT. Now I prefer it. I can't fathom having to dedicate one of my appendages to holding a phone to my ear anymore.
Anyway, Vito Audio Notes works fine to record both sides of the conversation. They have a setting for speaker phone. You turn that one and viola. And AFAICT, when talking on the BT headset the speaker phone in the Diamond is not, I repeat NOT blerting out the contents of your conversation.
On the rare occasions when I use the phone to talk instead of my BT headset, when I answer the phone the speaker phone turns itself on. I think that that is from Vito Audio Notes. I have since turned off the setting in Audio Notes to automatically turn on the speaker phone and my last phone call seemed to record both sides of the conversation.
In any event, it is indeed doable even with this hardware, using BT at least.
You can record the call, using your handsfree.
I am also using Audio Notes. It can record both side phone conversation, but it cannot record counterpart's voice when I am using with my bluetooth headset.
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.
Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?
Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,