Related
http://phone.msndirect.com/phone/download.html
I cannot get it to work on the Kaiser, has anyone tried this yet?
Won't install for me either. Says it's not intended for this device.
I'm running v3.0 Sleuth. Could be it doesn't like WinMo 6.1, but I have no way to verify that unless I reflash.
I have a t-mobile Wing and it doesn't work either. I think it is because all the phones listed as supported are smartphones (without touch screen).
Anyone know a work-around install for touch screen based units?
Just look at the name of the file it installs: SP50.cab = SP= Smartphone.
I've adjusted the CAB a little to allow it to install on a Kaiser. But when installed it's not 100%.
It installs, you can run the MSNDirect.exe through File Explorer, but as the controls are geared towards SmartPhone, it's not all that usable
Perhaps someone with additional skills can tweak it.
Is it possible for someone to tweak the program to be more touch friendly?
I'm pretty bummed about this. I've had a SPOT watch for years and would really like to have it on my Kaiser.
I have a Dash sitting on a shelf at home, that my wife didn't want, but I really can't switch to a Dash for MSN Direct.
its work for me
samsung b7320
but no wethr for iran .......
sucks!!!
but rep+++
yhx
Wow I didn't even know this service was still around...I used to have one of the watches, they were pretty cool.
This does not pertain to Kaiser Rom Development. Please post questions like this in the Kaiser General section in the future.
Thank You
I'm about fed up with TouchFlo 3D, nice but pretty useless and I REALLY miss the Cube from my Touch Dual, much more convenient and doens't waste CPU cycles, so...has anyone installed it on the Diamond ?
Found a few existing CUBE topics, but not sure if there might not be interference and if a VGA skin is needed.
Topics : http://forum.xda-developers.com/showthread.php?t=343583 and http://forum.xda-developers.com/showthread.php?t=348437
Ok had to hard reset...
Was hopeful after a post by SecureGSM :
"HKLM\Software\OEM\TFLOSettings:
also, there is one that is suppose to enable cube finctionality there:
EnableCube : default value (0) <--change that to (1)"
But not working for me.
Its not so simple as switching cube on. Cube is simply not there in our Diamond. If u try to install this Cube configurator from the Elf thread, u'll see a multitude of errors, missing files, etc. Cube may be functional here, but we'll be needing all those files
Yes, that sucks, the CUBE is x times more useful than TouchFlo 3D IMHO.
There must be a way though because it was added to non touch devices.
i dun think we'll have to descend to the non touch method, they use flash. i'm sure if we can get the Touch Cruise for example, and get their files, and put it in, it should work? i think
Catching up, I also thought this would do it http://forum.xda-developers.com/showthread.php?t=348437 but so far no luck either.
bump - hope someone can figure it out ;-)
Another bump, that would be such a useful addition, I'm sure the bright minds around here can figure how to add the Cube back ;-)
have u tried Touch Commander?
Not sure, got a link ? I tried the tools linked in the first message and no go, had to hard reset.
I know a guy who might be very good at this ... Duttie or something like that
Unfortunatly, he is not around (yet)
Sounds good, hope he joins us soon !
Have you considered something like this:
http://www.spbsoftwarehouse.com/products/mobileshell/?en
There are a couple of other similar GUIs out there and the good thing about them that they all VGA optimized.
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Thanks, but what I like about the cube is up and down the gesture to bring the contact list and then left to right for the various tools. The Contact list would be enough actually.
bumping it up ;-)
obender said:
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Click to expand...
Click to collapse
gsmart just buggerd up my diamond....
i won't be trying that again in a hurry
this looks good if they can get it to fit our screen
http://forum.xda-developers.com/showthread.php?t=417825
Any news guys ? I was so happy with my Touch Cruise but bought the Diamond for the 640x480 screen and faster video playback.
The TouchFlow 3D looks fine but it's very useless to me, The old TouchFlo Cube from the cruise could be swept away and you had your normal windows todayscreen.
I tried the Cube thing SPD Mobile Shell but the old originall CUBE is way better I think.
Any solutions ?
Bump!!! I Want The Cube!!!!!!
same here, in fact I want it so much I've stuck with the HTC Touch Dual, aka Nike !
does any one know if its possible to use the g sensor to control the direction when playing on an emulutor, is such a tweak possible?
It would be nice playing Bomberman, or packman using the g sensor
hey!
are you using an emulator on your diamond? I didn't know there was any around. What emulator do you use & where can I find it?
Thanks for the help
chriggii
Only working GBA emulator is Morphgear.
Oh, guys, come on... Just google for PocketGBA. Is it so hard?
Ive already tried many versions of pocketgba but none of them work. which one works? I thought none of them work yet.regards
mazais said:
Only working GBA emulator is Morphgear.
Click to expand...
Click to collapse
no one version of pocketgba work on diamond
chriggi said:
hey!
are you using an emulator on your diamond? I didn't know there was any around. What emulator do you use & where can I find it?
Thanks for the help
chriggii
Click to expand...
Click to collapse
You haven't bothered reading the sitcky threads and at least taking a quick look at the Wiki, have you? Emulators have a separate category there... http://wiki.xda-developers.com/inde...s - for both games and productivity platforms
latest version of pocketgba works on my diamond, at first it didnt work because i would get errors during button mapping, i figured that gsen was messing it up, so i put pocketgba in the exclusion list of gsen and i took the option off that allows hardware acceleration, as the pocket gba only supports that intel one supplied in dell axims and maybe other pocket pc's, it works fine now, although the framerate is very low and most games are not playable,
if we could some how tweak pocketgba to allow the use of gsen to control movement, it would free up some of the hardkeys to map other stuff, as the diomand lacks alot of hardkeys.
i can't even get pocketgba to run without an error...
installing the cab results in an error and unsuccessful installation
unzipping and copy the folder over provides an error as well...
i'm currently using dutty's v3.6b ROM
tried with gsen off and still no go...
anyone know what the problem is or have successful results running PocketGBA on their HTC Diamond?
i've been running PocketGBA on my Touch Pro since i got it... no problem at all....
i map my direction buttons to the d-pad.. never map to keyboard as it's troublesome to slide out and play...
tried Gcontroller and Gpad... to use G-sensor to control character by tilting.. but no success...
In my diamond works more or less well..
edwinlinkt said:
i've been running PocketGBA on my Touch Pro since i got it... no problem at all....
i map my direction buttons to the d-pad.. never map to keyboard as it's troublesome to slide out and play...
tried Gcontroller and Gpad... to use G-sensor to control character by tilting.. but no success...
Click to expand...
Click to collapse
How did you get PocketGBA to work?
i have some problems running pocketGBA, im using a lg-incite, qvga, when it runs the screen is messed up, u see the icons but there are a lot of lines running through it. what should i do? thank you
um i have a sprint htc touch pro so i was wondering what did you use to make the gba emulator work i really need ur help
mazais said:
no one version of pocketgba work on diamond
Click to expand...
Click to collapse
Please Try This Patched Version...
PocketGBA (EnerGetiX Patch)
I dont know why, but i cant get any emu to work, theres never a chance to get the keys on the touchscreen and any setting at all... does anybody know an emu that works on th diamond...
there are so much games on the net, but no chance to play them...
Have you tried Morphgear?
have you? I'm asking for a running one... none of them worked when i tried...
Here i'm running this one on my diamond (snes emulator) just copy the folder to your phone, run the .exe and load the game. its best if you landscape the picture and use arrows with the touch Y,X,A,B rather than touch gamepad (screen's too small)
Diamond official HTC rom 1.93
http://rapidshare.com/files/159686409/PocketSnes.zip.html
Can you please re-upload? The link is no longer valid, and I too have been looking for solid emulators
Using Gen+ here. Really good genesis emulator (sega megadrive). the 3 buttons (A,B,C) are on the right on the screen and it's working perfectly...
Gen+ : http://www.clubic.com/telecharger-fiche43052-genesis-plus.html
Roms : http://www.mondemul.net/roms.php?type=md
thanks...
i'm going to check these sites out....thanks
how can we use the smart touch (directional keys) in games/emulatores?
Hello.
Since we're talking about emulators I want to ask: has anybody seen a GBA emu for WM which supports savetype 128k (feature of GBA). I've tried a few programs but they only support 64k savetype.
Thanks in advance.
Well, I have read threads about making PocketSNES works on X1, but not for the NES, Genesis and Gameboy.
I know that I have to get the tgetfile and wvgafix for most of the emulators - but would you guys please also suggest the best emulators available for X1?
Thanks a mil
Morphgear. Search the forum, it has been discussed very recently.
read the wiki?
http://wiki.xda-developers.com/inde...s - for both games and productivity platforms
Thanks Angelusz and Rudegar for your information - but the point is that X1 will not run many emulators by its default.
I have tried PocketNES, NESCE, GENSPP and some more and it just wont run off the machine and crashed. Those guides are very useful, but not X1 specific in some sense.
Rockman27 said:
Thanks Angelusz and Rudegar for your information - but the point is that X1 will not run many emulators by its default.
I have tried PocketNES, NESCE, GENSPP and some more and it just wont run off the machine and crashed. Those guides are very useful, but not X1 specific in some sense.
Click to expand...
Click to collapse
I answered your question, yet you did not include my response in your above post. Try first, ask later.
Angelusz said:
I answered your question, yet you did not include my response in your above post. Try first, ask later.
Click to expand...
Click to collapse
Morphgear just crash away on the Chinese R2A X1, with or without wvgafix. I think it might be a good time for me to think of rather I should flash it to English versions instead.
Thanks again -
Rockman27 said:
Morphgear just crash away on the Chinese R2A X1, with or without wvgafix. I think it might be a good time for me to think of rather I should flash it to English versions instead.
Thanks again -
Click to expand...
Click to collapse
Have you used the settings I described here : ?
http://forum.xda-developers.com/showpost.php?p=3299398&postcount=25
Using FinalBurn for NeoGeo and PocketSNES for SNES. But cos I've gotta use WVGAFIX to get it working, it doesn't fill up the entire screen.
has anyone gotten morphgear with snes9x to work in landscape mode..Thanks
DO A SEARCH AND FIND ALL YOUR ANSWER IN THE LAST 3 THREADS ABOUT USING EMULATORS ON A X1 !
Can someone please delete / close this thread ?
fotoingo said:
DO A SEARCH AND FIND ALL YOUR ANSWER IN THE LAST 3 THREADS ABOUT USING EMULATORS ON A X1 !
Can someone please delete / close this thread ?
Click to expand...
Click to collapse
Seconded....
Is there any Gameboy emulator, that support X1 hardware acceleration? I already found out that 2700G option on PocketGBA dont work on X1 and without any acceleration games have around 3fps with audio on and 5fps with audio off on PocketGBA.
Also is there any emulator that takes control of buttons instead of just mapping them? Camera and volume buttons would be great for L/R on gameboy, but problem is that camera app and volume control is poping out when you press these buttons.