Database Develop

Touch Flo

Is it possible to have touch-flo working on our wm6 himalaya

the other devices apart from touch
dont seem to be able to get it working as it does on touch
so i would not count on it

but few components of touch flo seems work.
I think at first we need fix gprs trouble.

yeah but from what i understand they need to use some hardware button to activate some of the flo
which the touch people dont
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
doubt it though :S

sorry for offtop
wm6 give at least Bluetooth PAN over MS drivers.

Rudegar said:
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
Click to expand...
Click to collapse
Works flawlessly with 400 MHz.
Much better than WM 5.0 on my StarTrec headphone.
Sascha

would the touchflo on blue angel would work on himalaya?

Where can one download touchflo??
I want to try it out!
Im looking for this file: Touch Flo (Alpha).zip‎
Will it work on HIma??
Thanks guys!!!!

recall a link here
http://forum.xda-developers.com/showthread.php?t=326523&page=6

Touch Flo Alpha - not working on Hima
I must hard reset.

divocak said:
Touch Flo Alpha - not working on Hima
I must hard reset.
Click to expand...
Click to collapse
Yes i also confirm this. It isnt working.. my device is now freezed on boot screen.. hard resetting it...

from what i've picked up in forums for trinity and hermes then
the touch flo require a special screen dll
all devices have that dll but the touchs is different
and they all seem spc to the device so one cant just move the dll from touch to another device
well that is to say one cant move the dll from touch to another device yet!

When you search Youtube for Touchflo, you get a whole bunch of clips from all kinds of HTC devices running Touchflo quite well. Some do use buttons (who cares?) with touch screen finger touch mode, others seem not to touch any hardware buttons at all. In all cases they're able to access anything on screen without ever grabbing a stylus.
Although I've not yet been able to taste this kinda success on my Hima, it gives me good hope that soon enough it'll be available to us as well.

In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.

divocak said:
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
Click to expand...
Click to collapse
I hope u don't mind, I will post this in the main thread for the Tofclock ROM here.
http://forum.xda-developers.com/showthread.php?p=1499747&posted=1#post1499747
We might have a solution.

tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????

neoknowles said:
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
Click to expand...
Click to collapse
Got the same problem.

Got the same message today from another taskbar button. I downloaded the test version of Pocket Hack Master today. I uninstalled it also for several other issues a.o. that it wants to constantly run at the highest turbo speed, telling me that CPU load is 100%, while I want to underclock to expand battery life.
But the same message from unrelated taskbar buttons sounds like we found another bug in the ROM. HTC and Anton Topov both spread their software with trusted certificates I assume. And I checked, there was nothing wrong with the startup shortcut of PHM as you probably checked for Touchflo.

iGO 8 or iGO 2006 on HTC Touch Pro

I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE

update to newer version (8.0.0.44366) or disable HTC home from Today

paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
Click to expand...
Click to collapse
U are in the wrong section. This is Kaiser thread.

sorry about that. i am new here. maybe a mod can help me by moving it to the right place.

paulyluca said:
sorry about that. i am new here. maybe a mod can help me by moving it to the right place.
Click to expand...
Click to collapse
its all ok, just post your question in the touch pro section.
But I think its not necesary, u already have the answer.

Moved to Raphael, aka Touch Pro, Forum.

HTC Touch Pro do not seem to have HTC Home. In the "Today" settings, there is the HTC Touch Flo enabeled. I tried to runn iGO with it desabeled, but no succes.
So, I think there must be some other way...

Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)

clandestino_usr said:
Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)
Click to expand...
Click to collapse
Thank you so much!!!
Got it working now....

Just a quick question, does it work in landscape mode on the touch pro?

Uhm, I don't know why it isn't working for you because on my Touch Pro it works great. Just installed it, copied the appropriate files for my country (the Netherlands) into the appropriate dirs as mentioned in the readme and that's it. Uhm, no, I had to set the GPS on com4 in iGo8 to get the gps working but that was all I had to do.
paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE
Click to expand...
Click to collapse

l0st.prophet said:
Just a quick question, does it work in landscape mode on the touch pro?
Click to expand...
Click to collapse
Just tried it. Works great in landscape too.

Can you confirm that the maps render and scroll smoothly when navigating now unlike the jerky movement you have with the Kaiser?

I can't compare with the Kaiser, I never had one. But map scrolling seems ok to me.

Hmm I got the same problem.. How do you actually update it?
I just bought my htc pro touch so bear with me please.
i installed it. everything seemed fine, i click on it, i get a loading icon, nothing happens.

Keyboard?
Hi,
iGO8 seems to work, but I can't get the hw keyboard to function. Not one key seems to respond. Does everyone else have this problem?
Thanks,
Cheers,
Cacti

i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
is the co pilot 7 better than igo8? in terms of usability by someone who doesnt understand how all this works

I have tested iGO8, TomTom 7, and Garmin XT. All work fine on the Touch Pro (but I did not test hardware keyboard input).
In my case, I found Garmin to have the best GPS performance: only 2-3 seconds lag behind my separate Garmin nuvi 760 unit, and <30 secs for first fix most of the time. iGO and TT are a little slower but still work fine -- but other people find iGO or TT to work very well.
Other thoughts: TT has the most detailed roadmaps, iGO and Garmin are average. But I find Garmin has the best POI support. iGO (and I think TT, also) supports TMC but (so far) it cannot be activated on the Raphael. Garmin does not have TMC but can download traffic from its servers via your data connection (3G, EDGE, etc). For me, Garmin is a solid middle-of-the-road software; the only major drawback is no TTS, which iGO and TT both have.
I haven't tested Co-Pilot 7, but since it's based on iGO core (iirc) I probably won't try it. But of course, you should try demo maps or at least read reviews to find out which software is good for you.
stranger stel said:
i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
Click to expand...
Click to collapse
To help clarify, there are two separate issues. The first is that many GPS software comes on SD cards that are intended to be kept on the SD, or on CD to be installed to main device memory, though if you buy it you have every right to install it to your Raphael. Since the Raphael only has microSD, you may have to install the program in a certain way to get it running. You also have to be careful of the software version, since not all are compatible with WM6.1. (These issues come up all the time among people pirating the software.)
The other issue is about the GPS receiver in the Raphael. Lots of people are trying different tweaks to get the best performance (ie: no lag) out of their receiver. But it's unclear if it's a problem with a weak antenna, or if certain programs (iGO, Garmin, TomTom) run better/worse on the Raphael. The results have been somewhat mixed but we're gradually figuring everything out.

Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.

aznfrenchboyca said:
Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.
Click to expand...
Click to collapse
Just install a newer wersion: 8.0.0.44366 or 8.0.0.54000 and it will work just fine.

PocketGBA Crashing Instantly

Hey all,
I have a question regarding PocketGBA and I seem to be seeing that people can get it to work on the Kaiser but I am having nothing but issues. I am using the non-cab installed version that has been posted on XDA but I cannot get this app to work.
When I click any icons it freezes and I have to preform a soft-reset with the stylus or hold the power button to power down.
I am using HyperDragon III PRO OS 5.2.20273 B. 20748.1.4.0, the prog is installed on my microSD card.
Any help would be awesome!

same with me..its wm6.1 no workaround as of yet..just have to revert to a wm6 rom i guess.. i posted before but seems no one uses this lol glad someone else does

xECK29x said:
Hey all,
I have a question regarding PocketGBA and I seem to be seeing that people can get it to work on the Kaiser but I am having nothing but issues. I am using the non-cab installed version that has been posted on XDA but I cannot get this app to work.
When I click any icons it freezes and I have to preform a soft-reset with the stylus or hold the power button to power down.
I am using HyperDragon III PRO OS 5.2.20273 B. 20748.1.4.0, the prog is installed on my microSD card.
Any help would be awesome!
Click to expand...
Click to collapse
Had the same issue. I found Morphgear to be a stable alternative at least for GBA. However it is not free but worth it.

deuzeff said:
Had the same issue. I found Morphgear to be a stable alternative at least for GBA. However it is not free but worth it.
Click to expand...
Click to collapse
I did not know there was a GBA plugin for Morphgear, I will have to get that.
Thanks guys!

There is no need for plugin, the software can do it itself . I strongly recommend that you try first the ROM to see if it is not to laggy before purchasing a license, cause some of them I tried (GTA for example) are not so good for now... we'll have to wait for better drivers.
GB / GBC and NES working perfectly however.

xECK29x said:
Hey all,
I have a question regarding PocketGBA and I seem to be seeing that people can get it to work on the Kaiser but I am having nothing but issues. I am using the non-cab installed version that has been posted on XDA but I cannot get this app to work.
When I click any icons it freezes and I have to preform a soft-reset with the stylus or hold the power button to power down.
I am using HyperDragon III PRO OS 5.2.20273 B. 20748.1.4.0, the prog is installed on my microSD card.
Any help would be awesome!
Click to expand...
Click to collapse
I have found that many graphics apps (e.g Quake 1, Quake 2, Age of Empires, SNES Emulators, Pocket GBA) does not work as soon as you implement Manilla 2d to a ROM or as part of the cab install - which I believe is part of the new HyperDragon Build you have?
I dont have the new Hyperdrgaon Build, but certainlly installing the Manilla 2d cab on my L26 Throttle Build 6 (or even ROMeOS 4.6.0 which I have also tried) stops any of the above working - i.e. crash as soon as opened. Basically I can install all the additional cabs for Manilla 2d - see here http://forum.xda-developers.com/showthread.php?t=398173 (I can even install all addons including the cabs under "nice to have") but as soon as I install the file called XDA_Manilla 2d - PocketGBA etc does not work.
Uninstall this specfic cab - and all works again.
Funnily MorphGear and Picodrive DO still work with Manilla 2d though!
So although I cannot prove it on the Hyperdragon build, my guess is Manilla 2d is causing the issue!

Snes/nes/gb/gba aso emulator for Diamond...

I dont know why, but i cant get any emu to work, theres never a chance to get the keys on the touchscreen and any setting at all... does anybody know an emu that works on th diamond...
there are so much games on the net, but no chance to play them...

Have you tried Morphgear?

have you? I'm asking for a running one... none of them worked when i tried...

Here i'm running this one on my diamond (snes emulator) just copy the folder to your phone, run the .exe and load the game. its best if you landscape the picture and use arrows with the touch Y,X,A,B rather than touch gamepad (screen's too small)
Diamond official HTC rom 1.93
http://rapidshare.com/files/159686409/PocketSnes.zip.html

Can you please re-upload? The link is no longer valid, and I too have been looking for solid emulators

Using Gen+ here. Really good genesis emulator (sega megadrive). the 3 buttons (A,B,C) are on the right on the screen and it's working perfectly...
Gen+ : http://www.clubic.com/telecharger-fiche43052-genesis-plus.html
Roms : http://www.mondemul.net/roms.php?type=md

thanks...
i'm going to check these sites out....thanks

how can we use the smart touch (directional keys) in games/emulatores?

Hello.
Since we're talking about emulators I want to ask: has anybody seen a GBA emu for WM which supports savetype 128k (feature of GBA). I've tried a few programs but they only support 64k savetype.
Thanks in advance.

Working NES, Genesis and Gameboy Emulator on X1?

Well, I have read threads about making PocketSNES works on X1, but not for the NES, Genesis and Gameboy.
I know that I have to get the tgetfile and wvgafix for most of the emulators - but would you guys please also suggest the best emulators available for X1?
Thanks a mil

Morphgear. Search the forum, it has been discussed very recently.

read the wiki?
http://wiki.xda-developers.com/inde...s - for both games and productivity platforms

Thanks Angelusz and Rudegar for your information - but the point is that X1 will not run many emulators by its default.
I have tried PocketNES, NESCE, GENSPP and some more and it just wont run off the machine and crashed. Those guides are very useful, but not X1 specific in some sense.

Rockman27 said:
Thanks Angelusz and Rudegar for your information - but the point is that X1 will not run many emulators by its default.
I have tried PocketNES, NESCE, GENSPP and some more and it just wont run off the machine and crashed. Those guides are very useful, but not X1 specific in some sense.
Click to expand...
Click to collapse
I answered your question, yet you did not include my response in your above post. Try first, ask later.

Angelusz said:
I answered your question, yet you did not include my response in your above post. Try first, ask later.
Click to expand...
Click to collapse
Morphgear just crash away on the Chinese R2A X1, with or without wvgafix. I think it might be a good time for me to think of rather I should flash it to English versions instead.
Thanks again -

Rockman27 said:
Morphgear just crash away on the Chinese R2A X1, with or without wvgafix. I think it might be a good time for me to think of rather I should flash it to English versions instead.
Thanks again -
Click to expand...
Click to collapse
Have you used the settings I described here : ?
http://forum.xda-developers.com/showpost.php?p=3299398&postcount=25

Using FinalBurn for NeoGeo and PocketSNES for SNES. But cos I've gotta use WVGAFIX to get it working, it doesn't fill up the entire screen.

has anyone gotten morphgear with snes9x to work in landscape mode..Thanks

DO A SEARCH AND FIND ALL YOUR ANSWER IN THE LAST 3 THREADS ABOUT USING EMULATORS ON A X1 !
Can someone please delete / close this thread ?

fotoingo said:
DO A SEARCH AND FIND ALL YOUR ANSWER IN THE LAST 3 THREADS ABOUT USING EMULATORS ON A X1 !
Can someone please delete / close this thread ?
Click to expand...
Click to collapse
Seconded....

Is there any Gameboy emulator, that support X1 hardware acceleration? I already found out that 2700G option on PocketGBA dont work on X1 and without any acceleration games have around 3fps with audio on and 5fps with audio off on PocketGBA.
Also is there any emulator that takes control of buttons instead of just mapping them? Camera and volume buttons would be great for L/R on gameboy, but problem is that camera app and volume control is poping out when you press these buttons.