hi all,
is there a cab to change or set the interval of vibration during incoming call for kaiser? continuously vibrating bothered me. FYI,I have TYTN 2 with original Rom
I did some search, i found this registry hack for prophet, and did not dare to tried it-
anyone could confirm whether it is work on kaiser?
thanks in advance
here is the link for prophet:
http://forum.xda-developers.com/archive/index.php/t-270040.html
Looping Ringtones Delay
Ring tone has a standard 3 seconds delay before repeating. You can set the delay from 0 second to how many second that you want.
Code:
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
Plus..heres the code
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v - for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
heres the example
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
I was trying to find a solution for this a month ago, but with no success. I think there is not a cab for this. Never tried that registry hack, but it could work.
Edit: ok, I tried to change the registry, it is working but I dont know what script to use when u want to play ringtone with a pulsating vibration.
Mikulec said:
Edit: ok, I tried to change the registry, it is working but I dont know what script to use when u want to play ringtone with a pulsating vibration.
Click to expand...
Click to collapse
Apparently this tweak does the commands in a sequenced order and not simultaneously. If you have a long Ring Tone (such as a Song) it won't do other commands until the "P - Play Ringtone" finishes up.
If you have a short ringtone (such as a *beep*) you could do a "av1pr" for a pulse+beeping ringtone. It kinda sucks, I know =(
Jimmyy said:
If you have a short ringtone (such as a *beep*) you could do a "av1pr" for a pulse+beeping ringtone. It kinda sucks, I know =(
Click to expand...
Click to collapse
I think that would be the worst ringtone ever.
Mikulec said:
I think that would be the worst ringtone ever.
Click to expand...
Click to collapse
so i guess till somebody figured out the right cab or the correct tweak, i just have to be satisfied with the continuous vibrating
portos03 said:
so i guess till somebody figured out the right cab or the correct tweak, i just have to be satisfied with the continuous vibrating
Click to expand...
Click to collapse
yes, that is exactly what I am doing. I remember that I had once a pulse vibration, but it was just with a special ringtone and I cant remember what ringtone it was.
Edit:
Sorry, I just realize it was a short ringtone and it only looked like it was a pulsating vibration.
ha ..
i was trying to find a solution for this too...
But i allways came back to the information,
that it works like a batch, not at the same time.
If the ringtone is e.g. a long music file it will play
it to its end until the next vibration starts...
very annoying..
Related
Is there anyway to make it vibrate for a shorter time when a text arrives?. At the moment the vibration makes as much noise and disturbance as having the ring tone on- not so good when you are trying to be discreet.
I hate to bump such an old message but does anyone have a solution for this? I did a search and can find only options for Ring vibrate changes... the SMS vibrate I have on this ROM is long and annoying. Before, I had just 3 short bursts.... Honestly, I would like just 1 short one!
If you go to start, settings, sounds and notifications, you can configure some things, but not set 3 vibrations to one, but you can set the vibration off
markoswahid said:
If you go to start, settings, sounds and notifications, you can configure some things, but not set 3 vibrations to one, but you can set the vibration off
Click to expand...
Click to collapse
You may as well put it on silent then?
what you need is a registry change. Which one though is a question I can't answer.
I have the 1.3 NmLs rom, and set on vribation, i only get one vibration, for a few seconds.
I was also wondering if someone could point me to the registry change for sms vibrations. On Dutty's older roms, I had 3 short bursts.... on his version 4 ROM, its a longer single one. I really would like a short discreet one....
I am sure there must be a way. Heck you can even control the haptic feedback on some keyboards like finger keyboard 2.1.... Can someone please point me in the right direction?
Thanks!
I was also wondering if someone could point me to the registry change for sms vibrations. On Dutty's older roms, I had 3 short bursts.... on his version 4 ROM, its a longer single one. I really would like a short discreet one....
I am sure there must be a way. Heck you can even control the haptic feedback on some keyboards like finger keyboard 2.1.... Can someone please point me in the right direction?
Thanks!
I have a solution but there's a catch. It's only a workaround and only allows *.wav files as ringtones.
You can configure your own virbation sequence. It's not user friendly though
after installation you will have some new files under /mydocuments
among those are
v100.vibrp files. These are scripts containing the *.wav file for the sound, and the ringing sequence
You can then select those virb files as if they were normal ringtones in your sound settings
you can alter the ringing sequence to whatever you like - it requires some trial and error. You can alter the wav files as well.
I can upload a file which results in 3 short vibrations if you can't manage to configure it.
Is there seriously no easy registry fix for this? In my current rom the vibration is for like 1234312 seconds and it really annoys me and the rest of the world.
there is none, but my above fix works just fine
I'm disappointed with HTC diamond because of this delayed ringtone, about 80% of my incomming call going to mailbox, its costing me too much , I have to calling back them. What is an idiot mobile phone, there is no any solution I think?!
there is a registry tweak to prevent a 3 second delay on incoming calls - also go to start phone/ options services and select call fowarding and tap get settings change whatever settings for no answer fromk what ever it is to 30 seconds
Thanks Ekksman! where can I find this registry tweak, and the other option u described is not a good solution, i ve changed from the service itself to 30 seconds, but I need it to ring from the first signal, not at the 3 ringingsignal.
I presume ekksman was talking about this: http://forum.xda-developers.com/showthread.php?t=258109
It seems to work. Downside: you have to convert your ringtones to wav's.
Quoted...
hope it helps...
Change duration of ringtone/vibrate/LED flash characteristics"
HKCU\ControlPanel\Sounds\RingTone0\Script = "v1w1v1w1v1"
E.g. vibrate 1 second (v1), wait 1 second (w1) sequence
Looping Ringtones Delay
Ring tone has a standard 3 seconds delay before repeating. You can set the delay from 0 second to how many second that you want.
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
Plus heres the code
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v - for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
Heres the example
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
Htc86 said:
Quoted...
hope it helps...
Change duration of ringtone/vibrate/LED flash characteristics"
HKCU\ControlPanel\Sounds\RingTone0\Script = "v1w1v1w1v1"
E.g. vibrate 1 second (v1), wait 1 second (w1) sequence
Looping Ringtones Delay
Ring tone has a standard 3 seconds delay before repeating. You can set the delay from 0 second to how many second that you want.
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
Plus heres the code
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v - for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
Heres the example
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
Click to expand...
Click to collapse
When I set av0pr then in Ringtone Settings should still be Vibrate and Ringtone but in my device it is automatically set to Ringtone and when I change it to Vibrate and Ringtone av0pw3r value is set.
I can set it up to av0pr and still have Vibrate and Ringtone in settings
Any idea?
Changing the HKCU\ControlPanel\Sounds\RingTone0\Script does not work. The Diamond will switch back to the default script after soft reset, that is, 3 seconds delay after the call comes.
The delay as stated in the post about regtweak RingTone0 is not for the delay of incoming calls. It is about the duration and loopdelay of vibration and sound.
What the xom is talking about is the moment a call gets connected, only light will flash, but no vibration and sound for the first few seconds..
Yes djin, its correct, the delay is just light flushing with out vibr. or ringsignal, man hear the ringtone after 2 incoming calls tone? I'm searching the solution of this, by the way what is HkEY? and how can I get it or changeit, how can I go in to controlpanel? can any body explain plz.?
for outcall delay and end call delay here below the reg strings (expressed values are in seconds):
HKCU\ControlPanel\Phone\CallProgressIdleTimeout
HKLM\Software\HTC\Phone\PhoneExtendSetting\EndCallTime
for prevent 3 rings there is only a way: you must use a wav ring or a very short/compressed mp3 (max 30/40 seconds) anyway 1 ring you'll never hear
bye,
davide
I have the same problem and, at the same time, something happens with some ringtones assigned to contacts. First, it starts ringing with the default ringtone and suddenly (maybe 1 sec later), changes to the ringtone assigned to the contact that is calling me. The ringtones assigned to the contacts are not mp3 nor large files, i selected the "oldphone" ringtone for some special contacts that is included with the phone.
Any ideas to avoid this?
Thanks
bookmarked
angler said:
Changing the HKCU\ControlPanel\Sounds\RingTone0\Script does not work. The Diamond will switch back to the default script after soft reset, that is, 3 seconds delay after the call comes.
Click to expand...
Click to collapse
I think not. I did soft reset and setting remains the same...
yaneck said:
I think not. I did soft reset and setting remains the same...
Click to expand...
Click to collapse
yup,same here
Settings will be restored after a while, anyway to fix this?
Remius said:
Settings will be restored after a while, anyway to fix this?
Click to expand...
Click to collapse
Setting won't be restored until you get back again into Settings>souns & notifications. But managing ringtones in TF3D Settings>Sounds doesn't have influence on that so you can use that.
I have set Registry key to pattern I wanted and I've exported that registry key and put shortcut to it in startup so it is back again after every reset and if I need I can run mentioned registry key to get back my setting
change car forwarding delay
thanks ekksman for the suggestion. it worked.... i changed the car forwarding to 30 seconds and now i am not missing any calls.
changing the mp3 ringtone files to wav making a big difference in the ring volume.
bookmarked for further info !!
tried altering the HKEY settings with no joy it helped went from 3 rings to 2 but still no immediate, cheers for trying
Is there any software that i configure a vibration time in my incoming calls?
mine is vibrating full time. when the xperia start the ringtone the vibration do not pause or stop till i answer the call
can someone help or suggest something?
In Sounds & Notifications you have the possibility to choose between ring only, vibrate only, ring and vibrate (it seems like you have chosen this setting) and the alternative of starting with vibration and ringing afterwards.
If this is not enough for you there is the possibility to adapt the sequence of the incoming call notification either in the registry (I don't know the keys though) or by using tweaking software such as SK Tools.
Thanks
altae said:
In Sounds & Notifications you have the possibility to choose between ring only, vibrate only, ring and vibrate (it seems like you have chosen this setting) and the alternative of starting with vibration and ringing afterwards.
If this is not enough for you there is the possibility to adapt the sequence of the incoming call notification either in the registry (I don't know the keys though) or by using tweaking software such as SK Tools.
Click to expand...
Click to collapse
Thank you! I did a long search about it and I found Vibro which is what i'm looking for
I found a program about it long long ago,but it not perfect
Does anyone think the default vibrate is a bit long?
I noticed you can create your own vibrate pattern (awesome feature), so I made a shorter one but it doesn't apply it!
Is that due to me being in vibrate mode only? But that doesn't make sense if so...
once you've created your pattern, make sure you recorded it (you are asked to give it a name for that).
then select it in the list of vibration patterns.
mfsieg said:
once you've created your pattern, make sure you recorded it (you are asked to give it a name for that).
then select it in the list of vibration patterns.
Click to expand...
Click to collapse
Yep, did that. It appears it only works for the ring tone and doesn't change the vibrate when in silent vibrate mode...
is it possible to disable the vibration when u switch into silence mode?
for example i have the normal mode activated and then press volume down until i hit "vibration mode" it vibrates - is it possible to disable that?
i a using llama to automatically switch into silence modes etc, i always thing i get a text message when i enter my work -.-
Please is possible disable vibrate when is delivered message or I touch list of applications on my launcher ? I donĀ“t like vibrate ... in setting is option for disable vibrate for ringtone but not for other. Do you have some idea ? Thanks
I never use vibrate
Hi!
I just want to know if there is anything I can do to separate notification volume from ringtone volume as I could not find anything on the internet that worked for me.
Try to use tile settings from play store, it has 3 sound modes in tile
HTCDevil said:
Try to use tile settings from play store, it has 3 sound modes in tile
Click to expand...
Click to collapse
I don't think you understood my question. I don't want to switch between different modes, I want to set different volumes for ringtone and notification. I have tried Volume Butler, Precise Volume and other such apps but they decrease the ringtone volume along with the notification volume & vice - versa.
Piyush1149 said:
I don't think you understood my question. I don't want to switch between different modes, I want to set different volumes for ringtone and notification. I have tried Volume Butler, Precise Volume and other such apps but they decrease the ringtone volume along with the notification volume & vice - versa.
Click to expand...
Click to collapse
Oh sorry, ok i understand now, i'll try to remember which app i have used in past for doing this and then reply.
Edit: found https://play.google.com/store/apps/details?id=de.hp.volume
I have used it one years ago, you should try it
HTCDevil said:
Oh sorry, ok i understand now, i'll try to remember which app i have used in past for doing this and then reply.
Edit: found https://play.google.com/store/apps/details?id=de.hp.volume
I have used it one years ago, you should try it
Click to expand...
Click to collapse
Thanks for the link, but I have already figured out a way of my own. I am using macrodroid(Tasker's free alternative) to increase the volume while the phone is ringing and automatically decrease it after the call ends or I miss the call. ?
????? Thanks for trying to help me. ??????
Piyush1149 said:
Thanks for the link, but I have already figured out a way of my own. I am using macrodroid(Tasker's free alternative) to increase the volume while the phone is ringing and automatically decrease it after the call ends or I miss the call. ?
????? Thanks for trying to help me. ??????
Click to expand...
Click to collapse
I am glad you resolved bro :fingers-crossed:
I don't find any solution for this problem! If I use apps to solve the problem they say that it didn't work of course the system set the ringtone and notifications twice. So is there any fix for that. I need a really loud ringtone sound for work outside. But if don't won't a really loud notification. I use C26 One Ui Android 10.
I hope that you can help me out!
Thanks!
Social_Work said:
I don't find any solution for this problem! If I use apps to solve the problem they say that it didn't work of course the system set the ringtone and notifications twice. So is there any fix for that. I need a really loud ringtone sound for work outside. But if don't won't a really loud notification. I use C26 One Ui Android 10.
I hope that you can help me out!
Thanks!
Click to expand...
Click to collapse
Use tasker/automate/macrodroid or something similar to automatically increase volume while the phone is ringing and then decrease it after the call ends.
Can you give me an export file of your Macrodroid Macros. Of course I have problems with the settings.
Or can you tell me your correct settings for each macro.
I hope that this is possible for you!
Thx a lot.....
triggers: phone ringing, call ended, call missed
actions: if trigger fired (phone ringing)
increase ringtone volume to 100%
if trigger fired(call ended or call missed)
change ringtone volume to 30%
constrains: not dnd/vibrate/silent
Hope it helps
Not realy..... :laugh::laugh:
1) Phone ringing
triggers: phone ringing
actions: increase ringtone volume to 100%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
2) Call ends
triggers 1: call ends
triggers 2: call missed
actions: increase ringtone volume to 30%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
3) No sounds - only alarm
triggers 1: not in "do not disturb" - allow all
triggers 2: no sound
actions: increase all volume to 0% and Alarm to 40%
These are my macros. But I dont find the way for "only vibration" for my 3 Option.
And I am not sure if two macros are enough.And what means "allow all"? If this trigger is true - it allow the action?!
I put my macro export in the attachment.
If you have the time I would be happy if you put your export in the attachment of your next post
Thx a lot......
My Macros doesn't work. When call comes in it is under 30% or 30%. And the 3) is really wrong, after I get up today I'm in vibration mode and can't get out. I had to stop the macro 3).
So I hope you are rescue me with a export of your macro.
Grettings from Germany
Social_Work said:
My Macros doesn't work. When call comes in it is under 30% or 30%. And the 3) is really wrong, after I get up today I'm in vibration mode and can't get out. I had to stop the macro 3).
So I hope you are rescue me with a export of your macro.
Grettings from Germany
Click to expand...
Click to collapse
Try this and change the settings according to your preference.
https://drive.google.com/file/d/1Dzmnx_dJDPaITeKwCboCWCqkE_TKtFZz/view?usp=drivesdk
Social_Work said:
Not realy..... :laugh::laugh:
1) Phone ringing
triggers: phone ringing
actions: increase ringtone volume to 100%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
2) Call ends
triggers 1: call ends
triggers 2: call missed
actions: increase ringtone volume to 30%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
3) No sounds - only alarm
triggers 1: not in "do not disturb" - allow all
triggers 2: no sound
actions: increase all volume to 0% and Alarm to 40%
These are my macros. But I dont find the way for "only vibration" for my 3 Option.
And I am not sure if two macros are enough.And what means "allow all"? If this trigger is true - it allow the action?!
I put my macro export in the attachment.
If you have the time I would be happy if you put your export in the attachment of your next post
Thx a lot......
Click to expand...
Click to collapse
Try removing "allow all" dnd condition first.
It may work then
I didn't check my mail that's why I didn't know that you were still facing problems.