is there anyone out there did powerdetect on Kaiser???
My Kaiser sometime auto switch off. I try to test the batt using powerdetect and the result :
Power Status Record 21 21:14:36
================================
00:00:00 99% 3.969 €0
00:02:00 97% 3.830 €0
00:04:01 94% 3.877 €0
00:06:01 90% 3.869 €0
00:08:01 86% 3.867 €0
00:10:01 82% 3.891 €0
00:12:01 78% 3.889 €0
00:14:01 74% 3.886 €0
00:16:01 70% 3.882 €0
00:18:02 66% 3.877 €0
00:20:02 66% 3.874 €0
00:22:02 66% 3.872 €0
00:24:02 65% 3.869 €0
00:26:02 64% 3.867 €0
00:28:02 64% 3.862 €0
00:30:02 63% 3.843 €0
00:32:03 62% 3.850 €0
00:34:03 61% 3.803 €0
00:36:03 57% 3.791 €0
00:38:03 54% 3.813 €0
00:40:03 52% 3.813 €0
00:42:04 52% 3.857 €0
00:44:04 52% 3.838 €0
00:46:04 52% 3.550 €0
00:48:04 52% 3.718 €0
00:50:04 52% 3.735 €0
00:52:04 48% 3.764 €0
00:54:04 44% 3.733 €0
00:56:05 44% 3.782 €0
00:58:05 44% 3.782 €0
00:00:04 44% 3.784 €0
following Kaiser service manual, i need to change batt.
could anyone post test results? specially voltage 3.75 V is it normal or under normal???
Thanks
The Kaiser comes with a 3.7V battery, so 3.75 is pretty normal for a charged LiOn battery.
Kaiser Powertest
I would gladly do the test if you can email me the powerdetect.exe file.
[email protected]
toddpedersen said:
I would gladly do the test if you can email me the powerdetect.exe file.
[email protected]
Click to expand...
Click to collapse
it would be better if you add the file here as an attachment so we can post results
i'll help you too
Yes please post the File I would also be interested in helping.
forum searched helped me sorry for the request.
http://forum.xda-developers.com/attachment.php?attachmentid=49090&d=1188824240
here's the powerdetect file. i'll test later
Mine shows 4.217Volts at 100% 3.899Volts at 63%
Related
Update 2:
Using Heimdall I flashed everything but the modem. I was able to boot stock Gingerbread 2.3.6, but (I suppose not unexpectedly) I had no network connection (SIM card is in).
I also got **** sorted out on my computer and was able to get Odin to detect my Cappy, but any Odin flashes hangs on either "Setup Connection.." (Odin 1.7) or "Set PIT file.." (One-Click Downloader).
______________________________________________________
Edit/Update:
Ran Heimdall anyways and it hung on modem.bin again. Here's the report:
Code:
Heimdall v1.3.1, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna
[url]http://www.glassechidna.com.au[/url]
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
[url]http://www.glassechidna.com.au/donate/[/url]
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun with device of type: 0
Uploading PIT
PIT upload successful
Uploading KERNEL
0%
2%
4%
6%
9%
11%
13%
16%
18%
20%
22%
25%
27%
29%
32%
34%
36%
38%
41%
43%
45%
48%
50%
52%
54%
57%
59%
61%
64%
66%
68%
70%
73%
75%
77%
80%
82%
84%
86%
89%
91%
93%
96%
98%
100%
KERNEL upload successful
Uploading MODEM
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
13%
14%
15%
16%
17%
18%
19%
20%
21%
22%
23%
25%
26%
27%
28%
29%
30%
31%
32%
33%
34%
35%
36%
37%
38%
39%
40%
41%
42%
43%
44%
45%
46%
47%
48%
50%
51%
52%
53%
54%
55%
56%
57%
58%
59%
60%
61%
62%
63%
64%
65%
66%
67%
68%
69%
70%
71%
72%
73%
75%
76%
77%
78%
79%
80%
81%
82%
83%
84%
85%
86%
87%
88%
89%
90%
91%
92%
93%
94%
95%
96%
97%
98%
100%
And after that, it's just stuck.
______________________________________________________
Original Message:
I'll keep it short.
A few weeks back I successfully flashed my Captivate for the first time to Serendipity VII. Upon recently trying to flash it back to stock, I managed to bootloop my phone. After that I tried quite a few different things, ending on Odin hanging on modem.bin when trying to re-flash back to stock. I tried flashing just the modem.bin with Heimdall and managed to get it to 100% - after which it hanged for ~30 minutes. Decided to pull the plug and see if it worked (my first time using Heimdall so I didn't know what the final readout was supposed to look like) and I coulnd't boot the phone for the next few hours (not regular boot nor into Download mode). Finally I got it to boot into download mode, and now while my computer recognizes the phone, Odin does not.
On the upside, Heimdall seems to recognize the device. I really don't want to screw up my phone any more than it already is, so which firmware from this thread should I use?
Or, is the modem.bin situation a serious problem? I'd love to use Odin (for which I found several users experiencing similar problems) but none of the answers seem to involve Heimdall. Is there anything else I should be doing?
Thanks for reading.. all help is genuinely appreciated.
hello i have a razr i and battery show me only 37% charge.i put into charge but after 1 hours battery status show 37 %
i think rom has problem.any idea?plz help
Last night I charged my phone upto 100 % than disconnected the charger , turned of data connectivity and leave the phone. At morning my phone show battery only 30% . It consumed 60% battery in phone idle.
This is daily problem. What to do. Plz help
Here is ss
I have seen that the indication of the access screen hours is often wrong. For example, it shows me 2 hours of screen time and I have 54% battery and then 1 hour and 40 and I have 48% battery
My mobile network battery usage says 14% for 5hrs 34 min ( I didn't talk on the phone longer than 1hr in total today) and phone idle is 12% for 11hrs 54 min. Is this normal?
elong7681 said:
My mobile network battery usage says 14% for 5hrs 34 min ( I didn't talk on the phone longer than 1hr in total today) and phone idle is 12% for 11hrs 54 min. Is this normal?
Click to expand...
Click to collapse
Battery consumption depends on what services you have enabled and how far you are from the nearest mast.