Database Develop

Tilt will not wake up

ive read some others having this problem, i just got my tilt and if its asleep for a while when i go to wake it up the screen stays black. the lights still flash at the top and the key board back light will sometimes come on but the screen will not come back. Ive tried every button but the only way it seems to come back is taking out the battery and replacing it then turning the phone back on. is this a wide spread problem or just a few devices (warranty worthy?)
any insight would be great
side note: ive only added a few plugins, have not done any thing yet to flash the rom at all - i am weary of trying this now because of the issue im having

Tilt not waking up
Install and run KaiserTweak. If you're running the AT&T Rom I'd change to something else as it's quite buggy.

Some people have suggested that having the automatic device lock enabled causes this, so you may want to try disabling that. Also do a search on here for the "sleep of death", that may help you figure out what's wrong.

Here´s another discussion of your problem.....although no definite solution, I believe.....good luck!
http://forum.xda-developers.com/showthread.php?t=339792&highlight=sleep

Backlight Defaults to MINIMAL After a Call! And Other Problems.

Good Afternoon
I had a new TyTN II Delivered from orange after mine was nabbed at the weekend, and i locked it remotely. When i make a call now all is hunky dory, but whilst in that call if i go to press START for example nothing will happen, so again i try another way and press X to go to the today screen to then press start, Nothing happens.
I inform my caller ill call them back, and end the call by either pressing "End Call" or pressing the Red Button, and then instantly the Back light defaults to a very low setting, and it did NOT do this on my previous TyTN II.
I have spent a fair while looking through here and google (and also MoDaCo Forums) trying to find a solution. I only know of one other person on MoDaCo who has the problem, and i have tried hard reset on the device too to no avail.
It is a Orange HTC TyTN II, so i have called them also for advice and they know about as much about it as i do.
This is a plea for someone here maybe to lend me a hand and sort this out, otherwise its going to collide with the nearest large surface in the next few days ha ha.
Thanks again for reading, and I hope someone can help me!
Sean Saunders

screen off
I select don't blank/turn screen off in a call, as I often want to enter dtmfs for mailboxes, or conf calls, downside uses a bit more battery

Hi mgr2003.
I have these options set, and it doesnt make a blind bit of difference unfortunately. I was hoping for some kind of CAB file for a fix? I dont know whats wrong with this device but its not as good as my previous TyTN II.
Sean

This question keeps being asked about once every week since the TyTNII came out. Sorry, but it is getting a bit annoying....
Once again: it´s caused by a bug in the HTC ROM and happens when a device password is set and the backlight times out during a call. Solution: disable the device password or - if you want to keep the password - push the power button twice after a call and you are back in business.....

That would be an all well and good answer but i do not have a password set on my device, so the answer doesnt justify?
Cheers for the Advice though.
Sean

I also have that problem with my tilt....when i am on a call the screen turns off..How can i disable this?

In that case I apologize for my somewhat rude reply. Your problem description just seemed to fit that bug exactly....
Sorry, have no idea what else may be causing that behaviour. Good luck, and if you manage to fix your issue be sure to let us know!

Did you use Kaiser Tweak to disable fast sleep?

Hi
I havent done anything to the device, it is exactly as shipped by OrangeUK. Its only 3 days old now, so not even had a second to do anything but use it.
Sean

I have an Orange TYTN II and this bugged me too.
Download Kaiser Tweak http://forum.xda-developers.com/showthread.php?t=333898
Follow instructions on thread and disable Fast Sleep (advised)
Normal Backlight and Power Settings will still be active

My Diamond no longer rings :s

Hello everybody,
First, sorry if I make mistakes I'm French.
My Diamond worked perfectly, until yesterday... Now it doesn't want to ring anymore when someone calls me. It vibrates, the screen turns on, but that's all. They're is absolutly no reason, since it is obviously not in "vibrating mode" (sorry I don't know how to say in english :s)
Please help me! What can I check (for example with phm registry editor)?
Many thanks.

In the TouchFlow 3D home screen "slide" to the Settings tab, the click on "Sound". At the bottom of the screen there is a volume control. It is probably set to "0" since you get no ring signal. Change it to 80% or something

jeah, ive got the same probs, just try it like said up there, or try softkeys on the left side or just suftreset
my probs had gone as i made a softreset

Thanks but I've already checked all settings. That's why I say there is no reason it doesn't ring.

I had a similar problem running one of the cooked roms, it was fine for a few days then all of a sudden it wouldnt ring. There was still sound when I played music etc just no audio for the ring, I checked all settings too. I ended up reflashing with a different rom which solved the problem.

Many thanks wilkewhaq.
My PC died 2 days ago, that's why I'm no longer able to flash my Diamond, so I have to buy a new one, and I'll flash it -_-

I flashed with belite 0.95 yesterday, it solved the issue, but today, it starts again.. -_-
Do you think it could work (more than one day...) with an other rom? I don't think it's due to my Diamond...
Thanks.

I had a similar problem. But I changed my ring tone and later on it is working. Perhaps check 'system volume' or 'Ring volume'.

Battery not Updating correctly and Key pad buttons not correct

Hey there i was hoping some one could help me out. I have 2 things
1.) The Battery Icon on the top bar does not update at all. It just shows a full charge no matter how much charge my phone has, When I plug it in it doesn't change to charging either. If I go to battery properties I then can see how much charge my phone has. Anyone encountered this?
2.)2 buttons on my key board are reversed. The 2 Fn Blue buttons "!" and "@" are reversed, how do I change those?
I am on rom version Stylez Black WM 6.1 Full v.3 Beta 2
http://forum.xda-developers.com/showthread.php?t=545821
and the last program I installed was S2U2 v2.04
http://forum.xda-developers.com/showthread.php?t=545821
Thanks for any and all help

Could be that you have the kaiser keyboard and not the Tilt.

Hmmmm, thats intresting
well my model # is kais100 and its HTC 8925.
is there still away to re-assign keys so I can fix this problem?

well if it's the problem that I think it is.
search + tilt keyboard problem = win!

ChumleyEX said:
well if it's the problem that I think it is.
search + tilt keyboard problem = win!
Click to expand...
Click to collapse
It is also addressed in the faqs on the first page of the rom. Why people throw their phone in to the fire with out even spending 5 min to read the faqs is still beyond me. I have flashed my phone well over a hundred times and I still read the entire first page of any new rom I am flashing, to see what I am getting into with my $500 phone.
As far as the taskbar icons go, could be a bad flash, could just be a phone hiccup, no one else has had that problem with the rom. Try a hard reset or reflash the rom.

Thanks for the fast responses! I totally missed the keyboard fix on the FAQ, I got everything else (including the Radio from the FAQ) but that slipped by me.
now I am still new at tweaking my phone so will a hard reset restore all my setting and I will have reinstall all my programs I downloaded?

Just Figured out a Hard Reset will Erase all my Data. So no one else has had this problem...hhmmmm... It has to be one of the programs I installed, Maybe if I uninstall them 1 at a time ...... anyone else got any Ideas?

Kaiser switches off automatically

Hi,
i use Athine OS WWE
Radio Version 1.71.09.01
The problem i face is my phone gets switched off automatically during a call.
I have done soft reset several times but no use.
Can anyone give me solution for this
Thanking you all in anticipation.

can somebody help me out to sort out this issue

If change the ROM there is any possibility to solve it.
If so Which ROM is best for kaiser Pls advice

Does it power off completely during the call ? ( battery problem )
Or does it just sleep during a call ? ( get Advanced Config and disable sleep during call )

Thank you Denco for your reply.
Yes it switches off completely, But incase if it is a battery problem, when i switch it on again it shows battery balance as same as when it switched off.Iam bit confused
Not only during call but when i use the phone continuosly for 10 mins it gets switched off automatically.
But i can switch it again only with the help of external power.
Please advice me if there is any other solution or i have to change the battery if so from where i can do it and how much it would cost
thank you once again

Please use the search before posting.
Has been answered numerous times but here is most recent a couple of posts bellow yours http://forum.xda-developers.com/showthread.php?t=639439
On that note thread closed.