i have a htc p4350 dead by flashing by wrong rom
i try now to repair it using rom found in xda-developers but it show me
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
any solution to repair
use the correct RUU version?
but seriously, we need more details, especially about your phone (HTC P4350 or wing/terra/you get the idea? IPL/SPL). also, what rom were you trying to flash?
here information about it
htc : hera100
ipl 1.08.0001
spl 1.08.0001
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
tramuyo said:
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
Click to expand...
Click to collapse
are u sure ??
well.. try to contact Olipro.. I think he can help you
for a $$$
what rom were you trying to flash? is it a custom rom or an official RUU rom? RUUs can be flashed with an SPL lower than 4 where as customroms cannot and must not.
i have tha same proplem please can any one help us
tramuyo said:
well.. try to contact Olipro.. I think he can help you
for a $$$
Click to expand...
Click to collapse
Hello Tramuyo,
everytime I open my desk drawer I see my Terra-Brick, am I getting paranoid about this pain or does it seem to me that you know something?
I was checking your last posts and it seems to me that you know a lot about this whole Cid-Lock/ Brick thing. Am I right, that with this Tool that maybe exists it should be possible to recover any device?
And, btw sorry to bother you with those damn Terras....
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
tramuyo said:
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
Click to expand...
Click to collapse
realy i have this proplem and need soluation for this
yes me too...
always invalid....
how to make my hera 100 alive again ??
please give me solution... where is the expert ??
helpppppppppppp
i have same problem
and i do evry thing here in forum but no lock
what we can do
to slove this problem
Contact Olipro for more information... Herald HAVES recovery!!!!
I Send To Him But Still No Luck
update from sd card
your phone has to be hard unlocked.
what can i do i have the same proplem and how to make hard unlock
search gold card !
and good luck!
Related
Hi all,
Hate to say this but I accidently also bricked my phone (I had PDAVIET working and then saw an update so forgot to put it back to WM5 first and then to WM6 again, now stuck in boot screen )
The reason I post this thread is I got a small question which will be one of my last resorts to fix it.
As I can only access the bootloader I hope this will work, so here is my question. If I pay 28 euro to IMEI-CHECK.UK to get an CID unlock, am I able to install any ROM (e.g. WWE English or WWE German etc..) and also will it unlock while I only can access the bootloader or does it require a functional OS ?
Many thanks...going to continue and slap myself in the face a couple of times..
HTC PLEASE RELEASE THE FREAKIN WM6 Dutch....argh
iTeQ said:
Hi all,
Hate to say this but I accidently also bricked my phone (I had PDAVIET working and then saw an update so forgot to put it back to WM5 first and then to WM6 again, now stuck in boot screen )
The reason I post this thread is I got a small question which will be one of my last resorts to fix it.
As I can only access the bootloader I hope this will work, so here is my question. If I pay 28 euro to IMEI-CHECK.UK to get an CID unlock, am I able to install any ROM (e.g. WWE English or WWE German etc..) and also will it unlock while I only can access the bootloader or does it require a functional OS ?
Many thanks...going to continue and slap myself in the face a couple of times..
HTC PLEASE RELEASE THE FREAKIN WM6 Dutch....argh
Click to expand...
Click to collapse
you dont have to go back to WM5 each time u want to update ur ROM. Mainly you should have installed hard SPL before any install.
you can search wiki for unbricking, i am sure i saw one.
Well I found a lot of stuff for the Hermes, which reminds that I should have bought a Hermes when I had the chance and i'm now stuck with this piece of sh*t.
I even tried other roms for other devices , my only chance would be CID unlock and install a WWE or wait for a million years for HTC to come out with WM6.
Thanks for the reply though.
Cheers
for noobs :
sany said:
you dont have to go back to WM5 each time u want to update ur ROM.
Click to expand...
Click to collapse
Sure, you don't have to, but I strongly recommend this. I bricked my Herald a couple of times while flashing from PDAViets WM6. My luck, I have a RUU to unbrick.
This one is for the newbees:
If you don't have a working WM5 RUU to unbrick your Herald, you should _NOT_ mess with this stuff.
Would it be by any chance a dutch one? The RUU Rom.
iTeQ said:
Would it be by any chance a dutch one? The RUU Rom.
Click to expand...
Click to collapse
NO, definately NOT. I searched my ass off for the Dutch HTC ROM.. But there simply is none. The only chance for unbricking is contacts inside telecom Repair Centre or sending your device to HTC. Or of course the (way too long taking) WM6 update from HTC..
If the WM6 update from HTC arrives how will we be able to use it. My phone allways complains about the 'vender id' when I use a WWE ROM. Why would it accept a HTC ROM?
Is there still hope?
hello i have a question about the WM5 RUU. can ik make it whit my one p4350 dutch???
if it can, how can i do that??
Monarch73 said:
Sure, you don't have to, but I strongly recommend this. I bricked my Herald a couple of times while flashing from PDAViets WM6. My luck, I have a RUU to unbrick.
This one is for the newbees:
If you don't have a working WM5 RUU to unbrick your Herald, you should _NOT_ mess with this stuff.
Click to expand...
Click to collapse
tell me more about this RUU and hard SPL....as I know i have hard spl....then do you advice me to have this RUU as well, pls advice
erictummers said:
If the WM6 update from HTC arrives how will we be able to use it. My phone allways complains about the 'vender id' when I use a WWE ROM. Why would it accept a HTC ROM?
Is there still hope?
Click to expand...
Click to collapse
Well obviously the WWE RUU isn't for your phone. If you have a dutch phone you need a Dutch RUU, if you have a German phone then you need a German RUU and so on.
When HTC releases the WM6 RUU they should release one for each language.
Sended HTC an email 4 days ago, men what a **** company that is...I still haven't got a response. Is it me or is this a really bad company in supplying support....never had these problems when I had other devices (Mio A701).
Anyone got any news from them ?
Yesterday they said that the update will be in August.
I hope...
Chris
iTeQ said:
Sended HTC an email 4 days ago, men what a **** company that is...I still haven't got a response. Is it me or is this a really bad company in supplying support....never had these problems when I had other devices (Mio A701).
Anyone got any news from them ?
Click to expand...
Click to collapse
Remember that it is vacation time for HTC Europe.. Everything takes almost twice the time then normal..
Email from HTC....i'm f*cked
Dear Customer,
You only can install the ROM with the original language of the device.
When you are registered at www.europe.htc.com in eClub, the site doesn't allow you to install a different ROM.
It doesn't matter if you are on the english site, your IMEI and SN number are recognised and will install a Dutch ROM if there is one available.
HTC doesn't have any ROM update for this device available yet.
If you require to re-flash your device than you need to send it in for repair.
Go to www.eurotwice.be
=> select language
=> Private user
=> Place your order
=> Select brand (HTC will be added)
=> Select Model
Type in customer information and IMEI.
Search which drop point to use and print out service paper.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Marc Vernaeve
HTC Europe
[email protected]
http://www.htc.com
iTeQ said:
Email from HTC....i'm f*cked
Click to expand...
Click to collapse
Dude why? Just wait for the official release!
Vendor Id
Last day of my vacantion. What's in the upload? The new WM6 updates!
Let's try the Dutch one. Still got the Invalid Vendor Id message...
Do I have to wait for the Vodafone update?
How can I remove this Vendor Lock when I can't boot my device into WM5 or WM6?
Hi,
my Terra freeze at the O2 screen. nothing happend than.
I tried many Hard Resets but without any success.
I try to install the Touch-It Rom. and it comes an Error. than the terra restart and than i only see O2 screen .-)
I have a German Terra with origianl WM6.
And Another Question - Is Wing the HTC P4350 ?? what is wing ? and what ecaxtly is ment with "RUU"?
Can anybody help me? Or can anybody tell me what to do? I need a Mobile Phone.
Many Many Thanks
Oliver
(sorry for my english - im a german guy )
wing == http://wiki.xda-developers.com/index.php?pagename=HTC_Atlas
ruu == ROM Update Utility
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
haanebambel said:
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
Click to expand...
Click to collapse
There are RUU's for all Herald except the Terra, if I remember correctly.
And there is no chance to install another ROM?
the bootloader works fine -
there i see
IPL 4.11.0002
SPL 4.11.0000
USB connection posibble.
I tried a rom i found in web - but at 2% the programm tells me
error 294- vendor id.
:-(((((
What can i do that the phone is workin again?
Your phone is CID to the Terra's factory ROM. You have to get a Terra RUU from your manufacturer. But they won't like that if they find out you were trying to flash a third party ROM into their device.
sorry to say
but 1000000 times mentioned
there is NOOOOOOOO RUU for terra.
send it to service
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
sammy__s said:
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
Click to expand...
Click to collapse
but not AFTER he tried to flash a WingROM....
the very first had to be flashing HArd-SPL - but he didn´t
Sorry.
i have a 8125 that i was using with cingular / att
the other day i was doing a HARD RESET .. and thanx to my stupidity i did it as the battery was just about to DIE ..
it did .. right in the middle of the HARD RESET
i plugged the phone back in and then turned on the phone
the " splash screen " comes up ..
the numbers
it says
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.11
appear on the top left of the screen .. and that is where it stops .. it will not BOOT any further .. .. nothing works .. the only way to get the screen to shut off is to take the battery out and start the process again
I feel i have damaged the O.S system or something
can anyone give me a place to start .. or a way to begin to even attempt to fix this problem ..
thank you so much in advance to anyone who can shed some light on this problem ..
start with the Wizard Wiki and get an original ROM (form the provider) to restore phone to good condition
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Sanboy said:
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Click to expand...
Click to collapse
My first advise was to read the Wiki. There you'll find a LOT of information and help on how to get it done.
You must find the same ROM that came originally with your phone. Go read and search...
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Yes go to cingulars website and download the 2.25 rom release. This will allow you to flash your phone back to oem condition. Try hard resetting it again, I don't remember if you can do it from the boot loader screen but you may be able to.
Best of luck.
Jeff
Sorry, but Cingular site not exist, today is AT&T, or not?
Sanboy said:
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Click to expand...
Click to collapse
What you want is to be spoon fed and that's why is so hard to find anything in this forum: because of the huge amount of repeated posts with same questions.
I made a Google search and in less than 3 minutes and 3 sites i found the original HTC/AT&T ROM link...
http://www.america.htc.com/support/8125/software-downloads.html
geez...
EDIT:
Double posting isn't a good policy either
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Was restoring the stockspl succesfull?
What info do you get in bootloader?
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse
"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.
orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!
Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Have you tried to flash your rom through the boot loader mode
try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is
haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.
thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.
I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.
Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.
@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.
Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.
replied to PM
cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...