Hi,
my Terra freeze at the O2 screen. nothing happend than.
I tried many Hard Resets but without any success.
I try to install the Touch-It Rom. and it comes an Error. than the terra restart and than i only see O2 screen .-)
I have a German Terra with origianl WM6.
And Another Question - Is Wing the HTC P4350 ?? what is wing ? and what ecaxtly is ment with "RUU"?
Can anybody help me? Or can anybody tell me what to do? I need a Mobile Phone.
Many Many Thanks
Oliver
(sorry for my english - im a german guy )
wing == http://wiki.xda-developers.com/index.php?pagename=HTC_Atlas
ruu == ROM Update Utility
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
haanebambel said:
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
Click to expand...
Click to collapse
There are RUU's for all Herald except the Terra, if I remember correctly.
And there is no chance to install another ROM?
the bootloader works fine -
there i see
IPL 4.11.0002
SPL 4.11.0000
USB connection posibble.
I tried a rom i found in web - but at 2% the programm tells me
error 294- vendor id.
:-(((((
What can i do that the phone is workin again?
Your phone is CID to the Terra's factory ROM. You have to get a Terra RUU from your manufacturer. But they won't like that if they find out you were trying to flash a third party ROM into their device.
sorry to say
but 1000000 times mentioned
there is NOOOOOOOO RUU for terra.
send it to service
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
sammy__s said:
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
Click to expand...
Click to collapse
but not AFTER he tried to flash a WingROM....
the very first had to be flashing HArd-SPL - but he didn´t
Sorry.
Related
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse
You may add Dopod C800 to the list
It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!
It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!
BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards
how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you
i did it with t-mobile wing usa
aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US
and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)
johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....
yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)
finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read
i have a htc p4350 dead by flashing by wrong rom
i try now to repair it using rom found in xda-developers but it show me
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
any solution to repair
use the correct RUU version?
but seriously, we need more details, especially about your phone (HTC P4350 or wing/terra/you get the idea? IPL/SPL). also, what rom were you trying to flash?
here information about it
htc : hera100
ipl 1.08.0001
spl 1.08.0001
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
tramuyo said:
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
Click to expand...
Click to collapse
are u sure ??
well.. try to contact Olipro.. I think he can help you
for a $$$
what rom were you trying to flash? is it a custom rom or an official RUU rom? RUUs can be flashed with an SPL lower than 4 where as customroms cannot and must not.
i have tha same proplem please can any one help us
tramuyo said:
well.. try to contact Olipro.. I think he can help you
for a $$$
Click to expand...
Click to collapse
Hello Tramuyo,
everytime I open my desk drawer I see my Terra-Brick, am I getting paranoid about this pain or does it seem to me that you know something?
I was checking your last posts and it seems to me that you know a lot about this whole Cid-Lock/ Brick thing. Am I right, that with this Tool that maybe exists it should be possible to recover any device?
And, btw sorry to bother you with those damn Terras....
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
tramuyo said:
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
Click to expand...
Click to collapse
realy i have this proplem and need soluation for this
yes me too...
always invalid....
how to make my hera 100 alive again ??
please give me solution... where is the expert ??
helpppppppppppp
i have same problem
and i do evry thing here in forum but no lock
what we can do
to slove this problem
Contact Olipro for more information... Herald HAVES recovery!!!!
I Send To Him But Still No Luck
update from sd card
your phone has to be hard unlocked.
what can i do i have the same proplem and how to make hard unlock
search gold card !
and good luck!
hi all,
i am having a problem with the trinity i unlocked sim with a tool i found here and then upgrade rom to 6.1 using hardspl 1.30 by oli till now everything is fine and working i decide to upgrade the radio rom and the flashing went 100% but when the device rebooted it was showing no gsm and it would start windows and get stuck in windows loader i tried to refalsh spl to 1.2 to des and always flashes 100% but 1.30.olipro stays tried to reflash with every radio rom i found for trinity and always flashes 100% but still no gsm i tried os cooked and official but with no avail. i found the original spl 1.06 but its .bin any one know how to load it on the device.? i found too some other people with same problem but i cant find any solutions i checked the device with mtty there is no bad blocks but when i do checkimage it gives me a error on radiorom checksum timeout..... does anyone has a solution for my problem please ? any help would be really appreciate it !!!!
no GSM FIX
hi all to all of you who have my same problem ... after hours and hours hours of searching and trying to find a solution i manage to get trinity back working ehat i did i used this tool attached found here on xda. its made by POF which i thank very much!!! i used it and downgraded the spl to 1.2 olipro after i could flash ant radio rom..... and was back in the game!! hope this could help you all who have the same problem
Hi thanks for this info I have the same prob. Would you plz tel me which ROM did you use to revive your trinity.
thanks
hi,
i have the problem of no gsm ...i download your tools but i dont khnow how to use them ...pleas help me ...
sorry for my english
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...