Map button to Enable/Disable WiFi - Tilt, TyTN II, MDA Vario III General

I have read this post http://forum.xda-developers.com/showthread.php?t=334759&highlight=remap and I was wondering if there was a way to map the PTT button to Enable/Disable WiFi, like the function on the keyboard, not link to Wireless Manager.
Thanks.

Remapping might be possible
I remapped another button (mailbutton) to enable/disable WiFi. The software you need is WiFiTrigger.exe. Once started the .exe enables WiFi, started again, WiFi is disabled. Search Google for "WiFiTrigger".
Hope this helps...

Hbutton
Use Hbutton

SPB Pocket Plus will do this job too..

I download wiftrigger.exe and Hbutton and because Wifitrigger is not an installed program I can not link to it. Is there a way to add it to the list or link to any file?

joesphroth said:
I download wiftrigger.exe and Hbutton and because Wifitrigger is not an installed program I can not link to it. Is there a way to add it to the list or link to any file?
Click to expand...
Click to collapse
create a shortcut and put it in \windows\start menu\programs

Wow! I don't know why I haven't thought to search for that, but that's a great little app! Wifi Trigger works great if you either create a shortcut, or just move the program into windows\start menu\programs, and it can be found here:
http://ae.inc.ru/aewft.php

Thanks a lot , it works great.

I'm also looking for something like this. Tried wifi trigger but i don't like the notifications--want one that just does it. AE button plus did it well but i don't want to install it just for that.

mikrom.cz said:
SPB Pocket Plus will do this job too..
Click to expand...
Click to collapse
Tell me how.
I cann't find it....

Vanstra said:
Tell me how.
I cann't find it....
Click to expand...
Click to collapse
In the today screen plugin, it should have a wifi trigger.

Related

Changing what ConnManager points to - Remap WModem to Internet Sharing

Title says it all. I'm trying to remap the Internet Sharing button in the 9 button CommManager on the ATT Tilt. Now, it goes to their WModem app, where I'd like it to go to the Internet Sharing app.
in HKLM\Software\HTC\CommManager\7, it just has a string value of "InternetSharing," so I'm not sure if this is the right place to look.
fuzzycuffs said:
Title says it all. I'm trying to remap the Internet Sharing button in the 9 button CommManager on the ATT Tilt. Now, it goes to their WModem app, where I'd like it to go to the Internet Sharing app.
in HKLM\Software\HTC\CommManager\7, it just has a string value of "InternetSharing," so I'm not sure if this is the right place to look.
Click to expand...
Click to collapse
I would like to know this also.
+1
d12ag0n49 said:
I would like to know this also.
Click to expand...
Click to collapse
Great idea, I'd like to change mine as well.
What's up with that Wireless Modem app anyway? Is it an AT&T or HTC app?
Anyway, anyone with any info on where in the registry to put the path for a comm mgr button like this?
bump
does anyone no how to do this?
Up
What has to be done further in order to activate Internet Sharing (IS) in CommManager (CM) ?
Registry settings seem fine but when pressing the IS button, nothing happens... it just blinks.
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\10]
Default="InternetSharing"
How does the CM interface work: based on dll only ?

Mapping Button5(Hold)

I flashed my TMO Wing and now Im running TouchFlo v.2.3
When I hold down button 5 I keep getting an error about VoiceCmd.exe.
Heres the deal, I dont want Button 5(Hold) to launch VoiceCmd.exe. I want to map it to something else...anything else. I've tried some registry edits and I cannot seem to find a way to change Button 5(hold)'s function. Even when choosing another app under settings-buttons, it still tries to attempt to launch VoiceCmd.exe and again I receieve an error.
I've searched far and wide and I've come up short on this topic. Can someone share some brilliance with me?
To be more specific, I want to map Button 5(Hold) to activate Voice Speed Dial. Thanks.
I have had the same issue. I have tried to map the button to something else but have continued to get the same error I gave up!
Solved.
Ok ok... So I figured it out. The button I am gonna show you how to map is also called the "PTT" button. You need a registry editing program to do this. "Total commader" works for me.
With the registry editing program locate a file in the /windows folder called "Long_PTT". This file basically links whatever app you want to the Long press PTT button. Edit this file and change the shortcut path to whatever app you want and there you have it. No more annoying "VoiceCmd.exe" error message.
Also dont forget to go to "setting-buttons" to remap there as well.
Hope this helps.
Thanks for the info, Been looking to solve this for a while ..................... but you do not need a registry editor you just need a file explorer program that has the abiity to give you properties of that file inother for you to change the shortcut path. and Total Commander and Resco Explorer are such programs ................................ and Thanks again
Thanks works great!
wordizbond007 said:
Ok ok... So I figured it out. The button I am gonna show you how to map is also called the "PTT" button. You need a registry editing program to do this. "Total commader" works for me.
With the registry editing program locate a file in the /windows folder called "Long_PTT". This file basically links whatever app you want to the Long press PTT button. Edit this file and change the shortcut path to whatever app you want and there you have it. No more annoying "VoiceCmd.exe" error message.
Also dont forget to go to "setting-buttons" to remap there as well.
Hope this helps.
Click to expand...
Click to collapse
Thats awesome man, worked like a charm!
Voice command BT headset
I have MS voice command and have run the BT patch but for the life of me I can't seem to operate voice command with my Plantronics 520 headset.
anyone have any experience getting this to work??
thanks!
brad99 said:
I have MS voice command and have run the BT patch but for the life of me I can't seem to operate voice command with my Plantronics 520 headset.
anyone have any experience getting this to work??
thanks!
Click to expand...
Click to collapse
I am running Open Touch V1 and installed MS VOice Command. Working fine without any BT patches with my Moto H700 headset!
coolmen777 said:
I am running Open Touch V1 and installed MS VOice Command. Working fine without any BT patches with my Moto H700 headset!
Click to expand...
Click to collapse
what is open touch v1?

How to use Comm Button for Toggle-Vibrate

Hi everyone,
In Jasjam there was a cab file to make it in vibration mode once you hold the Comm Manager Button
I tried this cab in my Kaiser after locating a Comm Manager Button to the OK Buttonn (The one below the Jog wheel)
However this didn't workout
Can someone help regarding this?
Search for a program called VibraSwitch. Install it and then assign it to the button of your choice. Works great!
ChaOConnor said:
Search for a program called VibraSwitch. Install it and then assign it to the button of your choice. Works great!
Click to expand...
Click to collapse
I tried to google the program with out luck... Could you post their WWW site? Thanks!
sphinx88 said:
I tried to google the program with out luck... Could you post their WWW site? Thanks!
Click to expand...
Click to collapse
You can find it here ^^
http://forum.xda-developers.com/showpost.php?p=1019893&postcount=1

any volume adj software?

hi,
I am looking for a simple software thet let me change the volume of the ring or the microphone without tapping with my nail on the small icon on the top of the screen and without use the same nail or pen to change and close it.
Something usefull with finger at least with big buttons or big slides.....
thanks a lot.
fausto
I use the Sprint Plugin
I use the Sprint plugin to accomplish this. Install cabs and throw everything else into the Window dir.
I want to replace one of the Icons to initiate the Task Manager from home screen. Nobody has got an answer for that yet?
fcreeves said:
I use the Sprint plugin to accomplish this. Install cabs and throw everything else into the Window dir.
I want to replace one of the Icons to initiate the Task Manager from home screen. Nobody has got an answer for that yet?
Click to expand...
Click to collapse
thanks for reply fcreeves, this is very helpfull but it is not what I wish to find.
I have extracted only the file WisVol.exe and I am using this to launch the volume application, it is however better than the micro icon on the desktop!!!!
Perhaps, I can give an answer to your question, even if I have well understood the question of course....
I use Spb mobile shell to launch taskmanager. I have remapped the IE hard button to start it and it works great.... you have to give it a try.
ciao
fausto
SetVolume from freewarepocketpc.net
try this one. it works like a charm with your fingers.
http://www.freewarepocketpc.net/ppc-download-setvolume.html
hope this helps
try thi one
http://www.freewarepocketpc.net/ppc-download-setvolume.html
setvolume........yeah.......great......usefull and why not....nice too!!!!!
thanks to everibody, it is what i was looking for...
thanks again.
ciao
fausto

How to remove panels totally

So this is a question.
I don't use them, I don't want them, I don't need them.
How to remove them totally so that I have again control on the button and that I can assign something else to it?
I would like to do this w/o flashing another rom or recooking of some existing one.
So far I was able to do small workaround so that button for them only shows small error message, but doesn't show them.
Tnx for help
You can assign the button to any other .exe, use seach its found here. Best way to get rid of panels s to flash a lite rom.
Loco5150 said:
You can assign the button to any other .exe, use seach its found here. Best way to get rid of panels s to flash a lite rom.
Click to expand...
Click to collapse
tnx for input, I have removed key totaly and it doesn't show error message any more, but I still can't assign that button to something else via AEButton
kulla said:
tnx for input, I have removed key totaly and it doesn't show error message any more, but I still can't assign that button to something else via AEButton
Click to expand...
Click to collapse
You can, just create a new button on AEButton Plus, also remember to turn off the SE Illumination notification on the button.
XavierGr said:
You can, just create a new button on AEButton Plus, also remember to turn off the SE Illumination notification on the button.
Click to expand...
Click to collapse
When I press add button in AEB it doesn't detect it, HEX value for it is 0000, other buttons work.
On previous itje versions of rom w/o pannels I could map that key to something else w/o problems, but not on the latest ones with pannels.
http://forum.xda-developers.com/showpost.php?p=3119245&postcount=27
http://forum.xda-developers.com/showpost.php?p=3119577&postcount=28
Thread: http://forum.xda-developers.com/showpost.php?p=3119577
Worked for me.
xperian said:
http://forum.xda-developers.com/showpost.php?p=3119245&postcount=27
http://forum.xda-developers.com/showpost.php?p=3119577&postcount=28
Thread: http://forum.xda-developers.com/showpost.php?p=3119577
Worked for me.
Click to expand...
Click to collapse
Tnx, this was exactly what I was looking for, but AEB still cannot find and recognize key.
I have absolutely no idea what you could do else.
Be sure to:
- Delete the whole registry key HKLM\Software\SonyEricsson\PanelManager
- Delete *both* Startup shortcuts "panelmanager.lnk" and "Paneldefault.exe"
- Soft-reset
- Assign button in AEBPlus (I use version 2.6.5)
- Soft-reset
[edit] I use stock ROM version R2, so maybe thats the problem.
xperian said:
I have absolutely no idea what you could do else.
Be sure to:
- Delete the whole registry key HKLM\Software\SonyEricsson\PanelManager
- Delete *both* Startup shortcuts "panelmanager.lnk" and "Paneldefault.exe"
- Soft-reset
- Assign button in AEBPlus (I use version 2.6.5)
- Soft-reset
[edit] I use stock ROM version R2, so maybe thats the problem.
Click to expand...
Click to collapse
tnx for help anyway
I'm using non stock rom, so that must be it
I am using 2.6 and the Key Code is: 00EA

Categories

Resources