Hi,
I hope that I am allowed to ask for this, I've checked around and can't find it anywhere and can't see anything that says I shouldn't ask!
I have co-pilot 6 (all legit, it came with my original mda vario from Tmobile UK) but have lost the CD's and the installation sd card got corrupted. I need to get it working again on my kaiser.
Does anyone have the installation cab that they could email to me or make available to download? As I said, I have a proper product key for it (i believe it wouldn't work without this anyway).
Any help would be greatly appreciated.
benbranson said:
Hi,
I hope that I am allowed to ask for this, I've checked around and can't find it anywhere and can't see anything that says I shouldn't ask!
I have co-pilot 6 (all legit, it came with my original mda vario from Tmobile UK) but have lost the CD's and the installation sd card got corrupted. I need to get it working again on my kaiser.
Does anyone have the installation cab that they could email to me or make available to download? As I said, I have a proper product key for it (i believe it wouldn't work without this anyway).
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried contacting T-mobile directly?
Related
another newbie post here, but despite having a read and asking before i'm still having problems.
touch flocube
i have this installed, but when i go to the media page, i get M0000, P00000 and V00000 rather than any names of files or anything more meaning full.
i have uninstalled and re-installed it, and in every other way the cube works fine, but i cant resolve this problem. anyone got any suggestions for me?
TomTom
as i have an orange supplied phone in the UK, i didnt get tomtom with mine. i have tried downloading 6.032 (i think) and got the message saying my rom needs to be updates.
a few people have suggested installing 6.03, but i cant find any legitiamte links for this, or a definite answer that this one will work. Any suggestions??
thanks in advance for any help
anyone any advice???
Not sure about your 1st problem (touchflo) as I don't use it on my Kaiser, however, try this for TOMTOM (6.032). It's the one I use without any problems.
However you will have to download the Map from here (for UK & western Europe. If this isn't your map, just do another search for your desired place).
And if you have any problems with it, PM me and I'll try and help...
thanks for those, but i cant download torents at work
anyone got a clue on my cube problem?
Hi, I have unlocked a MDA Vario 3 with the process on this site and put a dutty rom on the handset. My problem is that when i put a 3uk sim card in the handset i can access the internet just not planet 3. Is there any help for this problem please? When i try accessing the home url of planet 3 it states you cannot view this page on this handset please use your three handset?!
Cheers
drunkenmunkey85 said:
Hi, I have unlocked a MDA Vario 3 with the process on this site and put a dutty rom on the handset. My problem is that when i put a 3uk sim card in the handset i can access the internet just not planet 3. Is there any help for this problem please? When i try accessing the home url of planet 3 it states you cannot view this page on this handset please use your three handset?!
Cheers
Click to expand...
Click to collapse
Use one of the attached cabs to identify your phone as an N95. Personally I use it for Vodafone Live access, but I'm told it also works for those on "Planet 3".
You can install and uninstall the cab to switch between N95 and TyTN II as required, but a soft reset is needed after installation.
It uses a modified "browser.dll" file, which is different for WM6 and WM6.1 so make sure you install the correct one...!
Iv installed the cab, although i dont understand what you mean with switching between n95 etc. I cant find any program or application that has been installed by doing cab installation that you suggested?! Cheers
It doesn't install any program. It changes the way your phone reports itself to websites. In this case the website will think you are holding a n95 which is one of their "approved! phones so it should just work. Try using IE to go back to the planet 3 page and see what happens with the cab installed.
Yeah, sorry. I wasn't very clear.
If this is installed then the website you are visiting thinks you are holding an N95.
If it is not installed, then the same website will think you are holding a TyTN II.
By installing / removing / installing / removing, etc. You can "switch" between an N95 and a TyTN II
I see what you mean now about switching. Installed and tested and it works really well thanks the difference between 3 HSDPA and T-Mobile HSDPA is amazing dont know what T-Mobile are playing at its so slow!
Glad it's working!
Hi.How did you unlocked your mda vario 3? 'cos ive got the same aswell and i will like to use it for 3 network.Cheers
drunkenmunkey85 said:
I see what you mean now about switching. Installed and tested and it works really well thanks the difference between 3 HSDPA and T-Mobile HSDPA is amazing dont know what T-Mobile are playing at its so slow!
Click to expand...
Click to collapse
you do know that t-mobile and 3 now share HSDPA networks so technically there is NO difference
Sub69!!
You are my hero. I have been searching for months to find a 3UK cab that would let me use Windows Live Messenger while I had the 3UK sim card in my Kaiser. The original 3UK settings even blocked the use of Live Messenger while connected to my wifi if I had the 3UK sim card in the Kaiser.
Now you come along and solved all my problems...thank you thank you thank you!
Just a shame that I bought agile mobile a few months ago to workaround the problem, but that's life
Thank you again kind sir.
oops double post
they dont share at the moment, not expected til later on the year. does take a bit of time to set this kind of stuff up! only announced last month!
also works for 3ireland
Glad it's working for everyone. I've certainly found it very handy - Still can't believe that Vodafone and 3 make us use workarounds like this though.
I wouldn't be paying Vodafone £10 per month for MobileTV if I hadn't figured this out, so they'd be worse off. Have to wonder how many new subscribers they'd get if they dropped the restriction entirely...?
tunskie said:
Hi.How did you unlocked your mda vario 3? 'cos ive got the same aswell and i will like to use it for 3 network.Cheers
Click to expand...
Click to collapse
Just used this sim unlocker worked fine http://forum.xda-developers.com/showthread.php?t=361039
That sounds great!
Does it work for HTC-P3600/SPV M700 as well?
Excellent piece of work!!! Many thanks
Thanks very much sub69 for your hard work!
Hello everyone!
Thank-you very much sub69 for sharing your knowledge & expertise on this matter!
I have just taken out a contract with "3", and would like to use my unlocked SPV M700 (HTC Trinity) to access the plethora of services I am entitled to as a 3 contract customer!
I was wondering though (as I'm quite happy with my current setup/config of my SPV M700) whether the WM6 version will work on WM5, or is the .dll file significantly different between WM5 and WM6 (as I did notice WM6 and WM6.1 have different versions)?
Many thanks for your help in advance...
Any need to "switch back"?
Dear all,
I am really interested in this file in order to be able to access Planet 3 / Austria. Before installing I have a tiny question, however.
You say:
stuart_f said:
It doesn't install any program. It changes the way your phone reports itself to websites. In this case the website will think you are holding a n95 which is one of their "approved! phones so it should just work. Try using IE to go back to the planet 3 page and see what happens with the cab installed.
Click to expand...
Click to collapse
Now my question is: If Planet 3 successfully can be displayed with a HTC phone (in that way disguised as a Nokia one) - is there any need to switch back to the original HTC-mode?
I mean - does the N95-cab file affect the HTC's other functions in any way?
Because it seems a lot of work to constantly "switch" between HTC and N95, which requires a soft reset as it happens.
I'd be glad if I could just install the N95-disguise on my HTC TyTN II and leave it that way.
Thank you very much in advance!
Regards,
Stephan
help to install planet 3 in spv m700
hi sub 69 + everyone
i just brought new contract with 3 uk but my internet working fine but i want to planet 3 so how to get planet 3 and please send me step by step guide if you know as you advised in first post.
thanks
Hello all, 1st post here. I will be aquirring a XDAIIi in a week or two as a relative is replacing his firms pda`s and im getting one of the old units.
I know they were on O2 and I have a T-mobile sim so Id like to unlock it.
I have found the unlock info on this forum and will give that a go.
My question is, what should I check for to make sure it will be running as best it can be and how can I find out what s/ware should be loaded onto it and is there a way of getting a master copy of the original build or will this all be on the software disks that came with it ?
also is there any particular sat nav s/ware that works better than most on the XDAIIi?
I understand the xdaIIi is called something else in places, what is that name ?
sorry there such open questions nut couldnt think how to phrase them in order to do a search.
many thanks in advance, Lee.
Moving to alpine.
podhead said:
Hello all, 1st post here. I will be aquirring a XDAIIi in a week or two as a relative is replacing his firms pda`s and im getting one of the old units.
I know they were on O2 and I have a T-mobile sim so Id like to unlock it.
I have found the unlock info on this forum and will give that a go.
Click to expand...
Click to collapse
I have sucessfully unlocked three of my firm's old Alpine's, aka XDA IIi, using the file in this post, All in one SIM unlock tool, personally i found the earlier version more successful, but you may be OK with the newer version. The biggest thing i would say is to have patience, when you run it, it will seem to finish and nothing has happened. Wait until you receive a message saying it has been unlocked, and then soft reset.
Only other advice i can give is to do a hard reset to get it back to factory settings and then when you get a popup saying "Applying customisations in 3 seconds", or something similar, soft reset. This will prevent the O2 stuff being installed, leaving you with more RAM to play with.
Thanks Ive sucsefully unlocked it for t-mobile, fantastic. just need to find out what else I can do to improve this pda.
Don't try to improve it
as is it is one of the best ever made OK yes it restricted because of only running 2003SE but it runs it dam fast. I have a friend that has a Orbit (the latest one by O2 thats the equivilent of the XDA IIi and mine is as fast as his and he ditched the crappy sat nav software that came with it to go back to TT6, ref sat nav software it runs TT 6 fine I have it on mine and have no problems whatso ever.
I bought a TyTN II, unlocked HTC model. It seems to be a grey import, alghtough it has a "GB" serial, the box says Singapre/Vietnam.
The GPRS networks are all from Asia/Pacific. I cannot get it to connect to AT&T.
I've searched but cannot find a quick answer (or any, in fact). Any help would be greatly appreciated!
Thanks!
Keith
Try these - the carrier settings for the Kaiser/Tilt are the same as for the Hermes/TyTN, so they should work.....(famous last words)...
From @MrDSL - this post and associated CABs
From @wpbear - this post / CAB
HTH,
Mark.
Thanks Mark, these are Cingular - do you know if that's the same files as needed for AT&T (or are they the same now)?
Any danger of bricking at all by running these?
Keith
(Fellow Brit )
you cant BRICK a device simply by installing settings onto it.
you can brick a device by flashing a device that doesnt have hardspl on it however
andaroo said:
you cant BRICK a device simply by installing settings onto it.
you can brick a device by flashing a device that does have hardspl on it however
Click to expand...
Click to collapse
Hmmm...methinks a typo crept in there
If a device has HardSPL installed, then it is protected from becoming a brick due to a bad flash....
@tanglin - I'm pretty sure that "Cingular Wireless" is the new name for AT&T if I remember right. As @andaroo correctly stated, it won't do any harm to install the Cingular CABs to see if that fixes your Kaiser/TyTN II so that it works with your provider.....let's face it, it's more likely to work than the current Far East networks you've got configured
If you're in it for the duration and considering flashing an updated ROM, you would do well to read the Kaiser wiki - there's a page on there relating to a ROM by Quentin - Q-Mobile 1.2 - which is pretty damn good....plus Quentin has an "AT&T specific" version that will have all the correct settings built in.
There's plenty of other AT&T/Cingular users on the Kaiser forums, so you should get a response from someone who knows exactly what you need.
Enjoy!!
Mark.
So I took a deep breath...
Grabbed the 8525 cab and installed it. Rebooted, and voila, 3G right away with AT&T!
Mark, many thanks for your help. Now I just want to find a way to tidy up the Network Wizard combo list (with all the Asian countries in) and I'm set. But since the phone's working OK, I'm relieved I didn't just drop $800 on a grey import which did not work.
BTW, I am getting good support from the vendor I bought it from, so I don't feel too bad. For example, TomTom is not on this phone, so they provided a link. The s/w I downloaded would not install (invalid PowerPC application), so they said they would send it to me on a 1GB card. Not bad if they actually do! However I do want to put in an 8GB card anyway so I'll probably buy the nav software - it's one of the main things I want the phone for anyway.
If the vendor does come up with the goods, I'll post their name. It was $100 cheaper than the one my colleague uses (obviously the grey import has something to do with that!) but the support seems to be very good from a reseller.
Thanks again for the help!!
Hello ~~~
I'm a noob here on this site, so Hopefully I'm posting this correctly (if not, my apologies in advance...) I read through quite a few posts to see if there was a similar question already posted. If I've overlooked one please feel free to direct me to any posts on the subject.
I recently bought a HTC 8525. I owned a Treo Centro before, and ran a copy of Garmin Mobile XT on it. After purchasing my 8525, I tried to load my XT program on my phone. It installed without a hitch, but when I opened it up to run the program and use it ..... I received an error message that showed that my maps weren't present. Is there certain settings that I can change to make them visible, or is there something else I can do to be able to use it on my phone?
Thanks in advance for the help
did you downloaded the map file?
Here's the thing .... it was working with my former phone. I switched carriers recently, so all I want to do is be able to use it on the phone that I use everyday. I think its just a bit excessive to carry around a extra phone (which doesn't work otherwise), just to be able to use my GPS program.
I had never gotten this error message (about the maps being locked) with my other phone. I have the unlock code for it, but I don't know how to get to the area where it can be inputted. I've searched the program (as well as i could), but am unable to find out where exactly to place the code so that I can unlock it. Any help would be appreciated.
Got someone to correct the problem for me. Thanks for the help ........
Mr_XcepSHUNL said:
Got someone to correct the problem for me. Thanks for the help ........
Click to expand...
Click to collapse
what you've tried to always open maps files only with a Garmin program...??