Database Develop

Help - Think I've mucked up...

I have an BA XDA2s, and was attempting to upgrade ROM to latest WM5 version. Got as far as going into bootloader mode, and running BAupgradeUT. Mid update the programe said it had lost connection to phone (pretty sure i didnt accidentally disconnect it). My xda is now stuck with a blank screen with nothing except v2.08 at the botttom, and either USB or Serial at the top (depending on weather on cradle or not). I tried running BAupgradeUT again - but it has a connection error before it even starts now.
During the update my computer said that it had detected new hardware, and started trying to install drivers for it, but got stuck when it couldnt find "wceusbsh.sys" file in my windows dir. (i forget which im afraid ...)
im perfectly happy to accept any solution - including ones that involve restoring the retail rom - i just want my phone back. can anyone help me, or am i royally screwed? thanks in advance...........

****...I fu**ed things up 2:S What to do now?

i think ive solved mine - if your having the same problem as me, i can give ya a hand... otherwise - im probably not the best person to talk to ......

well...tell me please, because i know what i did wrong...no extrom on my sd card...

right well - im pretty new at this, so bear with me
basically i eventually solved the problem by locating the file that it couldnt find, and when i had located that file, it had no problems communicating with the phone. so i ran the update again - and it worked fine...
afaik - the screen blank screen with v2.08 is just the normal screen while it waits for the rom to be uploaded.....
hth..... if not then its out of my leauge

ok..i'll try again:S

Someone help me please

I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!

To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).

Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP

Are you sure your Wizard is in bootloader mode when you start mtty?

It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect

Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...

In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday

If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired

help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!

Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it

I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?

dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.

error upgrading, BIG problem !?!?!?!?!

Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions

try to hard reset...
AddAn

error upgrading, BIG problem !?!?!?!?! reset
Hello Addan,
I tried all resetting methodes found here. Nothing works

MeItIs said:
Hello Addan,
I tried all resetting methodes found here. Nothing works
Click to expand...
Click to collapse
Don't worry. I used a GSM rom on my CDMA phone, then nothing worked. Even all type of reset, they did not work. Just find out a correct ROM to reflash it, then should be fine. Now my phone has 90% of function recovery

MeItIs said:
Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions
Click to expand...
Click to collapse
I suggest you to take out the battery out for quite sometime, let the backup battery die. Power it up later on and follow flashing procedure again.
It is always suggested to use Laptop for upgrading as they dont get affected by power shutdown for short time.

Hello Folks,
I tried all suggested til now. I took out the battery for more than a week but the problem is (and was) that I couldn't get a connection anymore with the Qtek thru activesync 4.5.0
The device isn't seen by the computer. Not even when I say activsync to connect to a device.
Still open for more suggestions

qtek doesnt do anyting
if your qtek doesnt doe anything any more try giting it in to bootloader mode and the try to reflash it if you cant get in to bootloader mode your device is nearly finished and you cant do anything more with it the return it to qtek and let them put a new flash chip in it
or get your hand on a new flash chip and a good manual of getting it opend and let someone who can reather good solder solder the old flash chip out of your device and let him put the new one in it and your device must be okaey after that and you can havefun with your device and the when you upgrade you qtek do it eith a laptop because laptops have an battarey that is capebale of work for 1 hour when the power is down or with a traffel battarey it can work on full loaden one for 3,5 hours

Ph10a Wont Boot Up.need Help Urgent Thanx

i got a XDA 2 I otherwise known as ,PH10A its not turning on so i cant install rom on phone.taken cmos battery out stil no joy,,please can anyone help me out i put it in the crradle and it does charge up.and on the screen it says USB V 1.02 and thats all and wont do nothing else ..pc wont reconise the phone..i badly need help anyone got any ideas ..

The bootloader message USB V 1.02 does mean that it is in healthy bootloader mode and that it does find a healthy USB connection as well. Activesync will not be able to communicate with it the way it would do if Windows Mobile would have been loaded on your XDA. But the normal ROM flash utilities should be able to access it. Be sure to use ActiveSync version 4.5 to flash WM6, be sure to use a PC running Windows XP, not Vista, be sure to read flashing instructions very carefully, print them and keep them handy during the flashing process. Flashing can take over 30 minutes, be patient!
success
Maggy

HI MAGGY
hey there thanx for your responce and advice how do i get the normal ROM flash utilities would u beable to give me some links to download them please i would really appreciate it and u would be a great help.i will make u a nice coffee....if i can accomplish this problem and get the phone started ...

HI MAGGY
Hi Maggie. Phone Is In The Cradle I Got Active Sync 4.5 And Running It On Xp.it Dosnt Detect The Phone At All.on The Phones Screeen Its Says Usb V1.02 As Iv Mentioned Befor.cant Seem To Flash The Phone ..but It Does Charge Up In The Cradle.but Nothing Else Can U Suggest Anything Else ....thanx

Download any of the ROMs from any of the ROM announcement threads in this board, like http://forum.xda-developers.com/showthread.php?t=328633
or
http://forum.xda-developers.com/showthread.php?t=332945
They come with the HimaUpgradeNoID utility to flash the ROM, it's built into the Tofclock .exe

HI MAGGY
just wanted to say thank u for those links it booted up my phone perfectly and cured the problems.now its got windows mobile 6 installed thank u so much [email protected]

Glad that I've been able to help you.
Cheers
Maggy

THANX
thanx Allot Once Again Been Testing Phone And Its Fine Now..cheers:d

Help! Problems flashing X1

Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...

Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?

Shameless bump for help.

very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.

Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.

hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.

I want to have the hardspl on there so I can flash custom roms.

If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?

U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.

Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!

k, i will msg u tomorrow around 2pm.

Cheers.
In the meantime. Does anyone have any other suggestions I could try?

Bump, for some help.

now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.

Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)

Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.

vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?

Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!

no problem mate hf with your x1

hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.