Is it possible to deactivate BT redial? I use Bluetooth Samsung 500 and the problem is that many times happened to call the last contact by mistake...
Related
Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
I've been experiencing this problem on my TyTN II with the original ROM. The programs I have installed which may be affecting the problem are:
-CooTek TouchPal 2
-TIInit_4_2_38 Kaiser (Official HTC Bluetooth Fix)
- duttythroy v3 Voip Setup
- Microsoft Voice Command v1.6.17913
Here's the problem:
- boot up the TyTN II (after being completely powered off) or toggle Bluetooth power off & on, with paired bluetooth headset within range and on
- Go to Phone screen. Headset icon is there indicating that the Bluetooth headset is connected.
- Press talk/send button on Bluetooth headset to start Microsoft Voice Command or answer an incoming call.
Result: Headset beeps as expected, but nothing happens on the TyTN II. Voice Command is not initiated. Incoming calls are not answered.
Workaround: If I go to Start>Settings>Connections>Bluetooth... Tap & Hold on my Bluetooth Headset, then choose "Set as Hands Free" the headset beeps again indicated that it made a connection. After I do that, all is as it should be! I can activate Voice Command, and answer/end calls with the Bluetooth Headset. I should not have to set my Bluetooth Headset as the Handsfree device everytime a reboot or toggle the Bluetooth power status.
I suspect it might be the Voip implementation, or the HTC Bluetooth "fix" but haven't done a hard reset yet to test.
Has anyone else had this problem? Does anyone know of a solution??
What headset are you using? I have the same software (except ROM) as you and haven't experienced this problem. I can SR with headset on and it will reconnect once the device reboots.
I tried it with the Nextlink Invisio G5, and Bluespoon AX2, both of which worked properly with other phones (HTC P3300, Nokia N95, etc., etc.,). I can try other headsets, but I'm pretty sure it's the phone software.
If your Voip and MS Voice Command are the same as mine and everything is working properly, maybe it's the HTC Bluetooth "fix". I guess another hard reset is in order soon.
If I pick up call on my BT HF (Jabra BT 8010), other site not hear me. After 1-2 seconds is all right, but waiting 1-2 seconds is very uncomfortable.
BT HotFix doesn't solve this probem.
Is there any option how I can solve this problem? I try KaiserTweak (setting BitPool, etc.... but still nothing).
Thanks.
Good evening and sorry for my pour english.
I have a similar problem with the BT handsfree for several days. Before, everything was working properly.
Now, when I receive a call in the car, my correspondent hear me directly, but I hear nothing before a few seconds.
However, if I call myself with the BT handsfree, there is no problem.
To solve this problem, I made a few SR and even a HR, but no improvement.
An idea?
Bemi
For some reason today MS Voice Command stopped announcing things such as messages and incoming phone calls. It wrked fine before, announced everything, but now when i get a call or message (vmail, txt, email) my headset will beep as iff it were about to anounce like it did before but then is just silent (i can hear the speaker active though as iff the bluetooth is active). I have everything checked to announce in the options and nothing has been changed but i am just wondering if anyone can help me solve this prob;em...ive also tried unchecking all options, soft resetting and then rechecking them all to no avail...
sorry guys i ended up finding a solution...my own idiocy lol
just bought a new bluetooth headset (jabra bt530) and now voice command won't announce calls through the headset. the phone rings and the headset also makes a sound to notify of a call, but it won't announce the caller's name. i can perform all other voice command functions from the headset.
everything worked fine with my last headset. and calls are announced when the headset is off so the phone isn't the problem. if it means anything, this headset has the wireless stereo profile.
diar said:
just bought a new bluetooth headset (jabra bt530) and now voice command won't announce calls through the headset. the phone rings and the headset also makes a sound to notify of a call, but it won't announce the caller's name. i can perform all other voice command functions from the headset.
everything worked fine with my last headset. and calls are announced when the headset is off so the phone isn't the problem. if it means anything, this headset has the wireless stereo profile.
Click to expand...
Click to collapse
Did you go into Voice Command Setting and Click Notifications and set it to announce over bluetooth?
You may search for the MSVC Tutorial Thread in The Kaiser Software Section.
I have to be a real newb...what is voice command?Where is it?
Its a program that you have to install unless you have it in your rom already, it allows you to COMPLETELY use you phone with voice commands. It requires no voice training at all, it works with microsoft's dynamic voice recognition.
fixed one problem and got another. using start>connections>bluetooth, i turned off the wireless stereo option and the headset started announcing calls. however, now the headset won't announce text messages. they'll just go through the phone speaker. this is weird.
i guess i could just use bt toggle to direct all audio to the headset but if there is any other way to fix it let me know.
problem solved. deleted the partnership and then paired it agan. but this time i immediately turned off the wireless stereo function. voila. everything comes thru the headset.
diar said:
problem solved. deleted the partnership and then paired it agan. but this time i immediately turned off the wireless stereo function. voila. everything comes thru the headset.
Click to expand...
Click to collapse
diar, how do you initiate MVC from your Jabra bt530. I get all notifications, just can't use it from my bluetooth. I tried holding the button, pressing it twice; nothing.
Help Help A list of MSVC
Does anyone now where in the internet a compleate list of all the voice commands. I have had no luck finding them.
hello everyone, i have a wierd problem with my ipaq 6515. its not serious but it can a pain sometimes. i have a plantronic bluetooth headset which is pretty decent. when i recieve a call and press the talk button on my phone to pick it up, the ipaq looses the headset and i get a sign of a headset with a question mark in it. however, when i pickup the call by pressing the bluetooth pickup button, it recieve the call on my bluetooth. i tried other bluetooths on my phone and they all give me the same problem. therefore, i concluded that the problem is present in my ipaq. please help me on this problem; thanks in advance.