Related
Some people might experience with certain GPS software.
If you look at the log of the NMEA log, you might realize that it burst out every 6-10 seconds. After that you might wait for another 6-10 sec, which is unusable for real-time navigation. If you happen to meet this trouble.
I have a way which could allow normal update intervals.
Install GPSGATE, it create virtual GPS COM PORT and re-route the NMEA data.
Install GPSGATE, just use the default settings, it create the virtual GPS port as COM 1.
Just use GPS software on COM 1 .
software url: http://franson.com/gpsgate/
Can anyone confirm this works? Ive noticed my GPS works the same way. Im using the Kaiser / TyTn II with Mapking and i notice that i also get my signbal ins bursts and NOT a smooth stream. Anyone know if this will resolve the problem?
What is the update intervals with GPSGATE ?
Do you mean GPSGATE must be run concurrently with the other software TomTom 6 for example ?
It would be a good workaround for people who encounter this GPS issue.
could this be some delicious spam?
How exactly does the OP propose that a user space application can make the hardware produce data in a smoother stream?
I call BS.
seems like BS to me too...Probably some spam Can anyone who has tried it out verify if it really works or not?..
THKS
You don't need to use other GPS software concurrently,
just use the GPSGATE and mapking will do.
Remember you have to modify the settings in mapking to use the virtual com port ( com1 default)
Not SPAM
I am not sure, this is BS.
If I am not mistaken the GPSGATE will act like a "router" (middle man) between the GPS hardware (Internal GPS of Kaiser) and the application (TomTom).
If the GPS hardware is faulty (having problem) with bursting data every 10 seconds, then the GPSGATE will also receive bursting data every 10 seconds.
So, that's useless as long as the problem is in the GPS hardware.
Gpsproxy should be able to do the same thing and its free.
GPSGate is a splitter, allowing using more than one application with the same NMEA stream. It creates another virtual GPS COM port, that's it.
GPS on the Kaiser works great and I'm on SatNav business. Aquisition time is fast, reception is great and update ratio is every 1 sec, just like any other civilian GPS receiver. GPS is NOT evaluated by the refresh rate you see on the screen, other software will give you other rate, try OZI Explorer for instance. I used Kaiser with TomTom, Destinator & Ozi, all works really great even comparing to Sirf III GPS chipset embedded devices such as Eten X500, HTC Artemis and Asus 535.
Last, Microsoft has included the same functionality of GPS Gate in WM5 and WM6 under settings. You do not need to install any additional SW, you can send "trueman 12345" (the guy who opened this thread with 2 posts history) your money directly.
Thanks RonenB for this very usefull precision !
Thanks as well RonenB, However, it does not solve the odd occasional pause in the data that we're seeing. Is this hardware or software that needs help in the Kaiser?
Actually I'm not so sure we have defined the problem accurately here.
Examining the signal from the GPS shows some interesting info.
1
A satellite is locked onto for perhaps only one or two seconds at a time.
2
Several satellites can achieve a lock but out of these a few will be lost every few seconds
3
New satellites are also acquired every few seconds.
The Result
If you are in the presence of many satellites then there is a constant dropping of some and locking onto others. This leads to no problems as there are always a few satellites locked on and data flow is smooth.
BUT
If you are in the presence of only say 2 or 3 satellites it is possible to drop these two or three (as indicated above), but no new ones are acquired. In this situation there will be a few seconds before the first 2 or 3 lock in again. Result a gap in data flow to your GPS software.
Meaning
The Internal GPS is not polling data in bursts. In other words you cannot turn up the frequency of data polling (possible baud rate adjustment maybe). The data is continuous but if there are too few satellites then there can be gaps where it drops some satellites and does not lock others.
There are various applications that can show this behaviour graphically but tomtom shows it well on the satellite view screen.
Compared to external GPS satellite locks this works in a strangely different way. You will see the bars jumping around from a lock on this one to that one continuously. Only a problem as I say when there are only a few satellites in sight.
Mike
PS - I cannot see the advantage of GPSGate in this particular situation as it is due to momentary periods when no satellite is detected.
Having said all of the above, I find the GPS perfectly adequate for general use. Perhaps if I need spot on plotting data then it might be weak. However if I need that unusual level of accuracy I would not use my phone to do it. I regularly use mine in place of my car's tomtom and the results are on a par with the full tomtom device.
mikechannon said:
Actually I'm not so sure we have defined the problem accurately here.
Examining the signal from the GPS shows some interesting info.
1
A satellite is locked onto for perhaps only one or two seconds at a time.
2
Several satellites can achieve a lock but out of these a few will be lost every few seconds
3
New satellites are also acquired every few seconds.
The Result
If you are in the presence of many satellites then there is a constant dropping of some and locking onto others. This leads to no problems as there are always a few satellites locked on and data flow is smooth.
BUT
If you are in the presence of only say 2 or 3 satellites it is possible to drop these two or three (as indicated above), but no new ones are acquired. In this situation there will be a few seconds before the first 2 or 3 lock in again. Result a gap in data flow to your GPS software.
Meaning
The Internal GPS is not polling data in bursts. In other words you cannot turn up the frequency of data polling (possible baud rate adjustment maybe). The data is continuous but if there are too few satellites then there can be gaps where it drops some satellites and does not lock others.
There are various applications that can show this behaviour graphically but tomtom shows it well on the satellite view screen.
Compared to external GPS satellite locks this works in a strangely different way. You will see the bars jumping around from a lock on this one to that one continuously. Only a problem as I say when there are only a few satellites in sight.
Mike
PS - I cannot see the advantage of GPSGate in this particular situation as it is due to momentary periods when no satellite is detected.
Having said all of the above, I find the GPS perfectly adequate for general use. Perhaps if I need spot on plotting data then it might be weak. However if I need that unusual level of accuracy I would not use my phone to do it. I regularly use mine in place of my car's tomtom and the results are on a par with the full tomtom device.
Click to expand...
Click to collapse
Ok, I believe that it is time to explain a little bit how GPS works.
The GPS satellites are transmitting their position rapidly. However, due to homeland security issues (US did not want to allow anyone to place a receiver in a jet fighter or a missile) civilian GPS receivers are limited to aquire position every 1 second only. This is not a problem for a normal user even for civilian aviation. Thus, when you look at the NMEA stream, you will see it coming in bursts and not as rapid as normal data. Since GPS strings are quite short, it is good enough for any navigation system.
Number of satellites aquired is not an indicator to anything. Like any RF system, the engineers can tweak the noise level so that it will look to you that you are receiving X amount of satellites, the signal is on the air anyway.
What is important though is the position of the satellites. the closer to the horizon, the less useable that satellite is to calulate the position. Therefore receivers are taking the best located satellites into account and ignoring others even of they are recieved. Valid fix (position) is aquired by at least 3 satellites for 2D (X,Y) and 4 or more for 3D (with elevation).
Result is that as a user, you should not bother too much looking into the stream or number of sattelite in use as long as you can get a valid fix. The important and effective elements are hidden from the user: number of transsistors in the GPS chipset, quality of antenna etc. User can just evaluate the overall preformance.
As I wrote above, the Kaiser integrated GPS surprised me for superb preformance. I just arrived this week from Israel to Germany and could get a fix as soon as I left the underground garage. I did not loose GPS signal even once since I started using the device. That includes forests and dence city centers. Real good job by HTC here.
This is the problem i am facing:
Im using MapKing with Hong Kong 2007 maps. Getting a fix is no problem. I can normally get a fix in about 10-15 secs. When i check the status page I will normally have a connection to 5-7 satelites.
The problem is that the icon does not move smoothly when i travel. In map king your position on the map is represented by a small car icon. It jumps from location to location every 3-5 secs but does not smoothly move along. Can someone please tell me if this is the case with tomtom as well? Maybe it a problem with mapking?
phame said:
This is the problem i am facing:
Im using MapKing with Hong Kong 2007 maps. Getting a fix is no problem. I can normally get a fix in about 10-15 secs. When i check the status page I will normally have a connection to 5-7 satelites.
The problem is that the icon does not move smoothly when i travel. In map king your position on the map is represented by a small car icon. It jumps from location to location every 3-5 secs but does not smoothly move along. Can someone please tell me if this is the case with tomtom as well? Maybe it a problem with mapking?
Click to expand...
Click to collapse
It is a Mapking problem and you should contact their support. Does not happen to me with Destinator, TomTOm and Ozi.
Ok, there is no point to argue, if you really find yourself having problem with GPS update lag, then give it a try. No harm indeed...
In HK, there are people the validity of the work around. GPS proxy might also work as well( i think it is the same principal) just i wasn't aware of this good free software before hand..
http://www11.discuss.com.hk/viewthread.php?tid=5329804&extra=page=2
(u need an account and some chinese word knowledge)
trueman12345 said:
Ok, there is no point to argue, if you really find yourself having problem with GPS update lag, then give it a try. No harm indeed...
In HK, there are people the validity of the work around. GPS proxy might also work as well( i think it is the same principal) just i wasn't aware of this good free software before hand..
http://www11.discuss.com.hk/viewthread.php?tid=5329804&extra=page=2
(u need an account and some chinese word knowledge)
Click to expand...
Click to collapse
Quite agree it's worth trying, and the application has other uses too.
Mike
FYI: I got GPS to work easily by installing GPSViewer, opening COM4/4800baud and getting located. After that, using Google Maps was a breeze; total "trick" took me about 1 minute to figure out which is way quicker than some other workarounds on the internet.
I was driving with iGuidance for about 1 hour this morning and I'm seeing different behavoir for this bug. iGuidance also has an excellent GPS signal viewer, mine was showing 8 out of 8 sattellites, all green, all the time (they turn red when not receiving signal from a sat). My map was moving about once per second or slightly faster. The program only paused once after about 30 minutes into the trip, for about 20-30 seconds. The iGuidance program's moving arrow's color also changes color based on signal quality of the combined sattelite lock, Green for good 3D mapping, Yellow for 2D when there are minimal sats for navigating, and Red for no signal data. During this pause the arrow went Red to indicate no data.
This seems like a bug to me.
Just got my 8925 and cannot get the GPS to interface with TomTom. It keeps saying GPS connection not found. Is there something special to do to activate the GPS? I have run the QuickGPS.
Thanks in advance,
Tomy51
tried going outside?
Yes, I went outside, tried the 3 different types of GPS's TomTom has ans still not connection.
tomy51 said:
Yes, I went outside, tried the 3 different types of GPS's TomTom has ans still not connection.
Click to expand...
Click to collapse
ok i run tomtom as well here is what i do:
1) download quickgps update
2) open gpsrouter com4 baud 4800 (search it if you don't have it)
3) run gpstest (under settings make sure it is at com4 baud 4800)
4) open tomtom (change preferences>show gps stutus>configure> try other NMEA set at com4 baud 4800 or Built-in GPS receiver. I tend to get a quicker fix using other NMEA)
good luck.
Thanks, that would probably explain why my gps isn't working as I do not have gpsrouter or gpstest. I'l go searching the forum to try and find it. Knew it had to be something, thanks agian for the help.
You really shouldn't (don't) need those things to make TomTom work. Just make sure TomTom is set to use the internal GPS (or set it to COM4 etc as above, depending on the version you have).
I use the TomTom that came on CD with the phone (not every carrier includes it) and it works perfectly, but you do need to be patient when you first start it up. Initially, it was always say "No GPS device!" for a good few moments before the internal GPS starts up, and then you'll get "Waiting for a valid GPS signal" - how long it waits then is down to your position etc. If you're outside with a good view of the sky - and your QuickGPS data is up to date - it could just be a few seconds - or you might be waiting forever if you're indoors/covered etc.
Does the "No GPS device!" message dissapear after a few moments for you? If it does then all is fine, you may just need to be more patient. If it doesn't, and it's constantly saying that, then something is misconfigured somewhere.
Boinng said:
You really shouldn't (don't) need those things to make TomTom work. Just make sure TomTom is set to use the internal GPS (or set it to COM4 etc as above, depending on the version you have).
I use the TomTom that came on CD with the phone (not every carrier includes it) and it works perfectly, but you do need to be patient when you first start it up. Initially, it was always say "No GPS device!" for a good few moments before the internal GPS starts up, and then you'll get "Waiting for a valid GPS signal" - how long it waits then is down to your position etc. If you're outside with a good view of the sky - and your QuickGPS data is up to date - it could just be a few seconds - or you might be waiting forever if you're indoors/covered etc.
Does the "No GPS device!" message dissapear after a few moments for you? If it does then all is fine, you may just need to be more patient. If it doesn't, and it's constantly saying that, then something is misconfigured somewhere.
Click to expand...
Click to collapse
The ATT tilt US version doesn't come with tomtom. I have had a purchased tomtom and the cab that is floating around this forum. The only way i can get it to work with either version is to have gpstest and quickgps. But without gpsrouter i usually have to wait 10mins for a fix. Kinda sucks but hey at least it works now.
redbandana said:
The ATT tilt US version doesn't come with tomtom. I have had a purchased tomtom and the cab that is floating around this forum. The only way i can get it to work with either version is to have gpstest and quickgps. But without gpsrouter i usually have to wait 10mins for a fix. Kinda sucks but hey at least it works now.
Click to expand...
Click to collapse
That's a real shame, because it works perfectly with the HTC rom. I wonder what AT&T have done to cripple it?
I just tried mine in the office and despite being inside (though on the top floor) it still had me located in about 30 seconds. There's a real joy in having a full-on, reliable TomTom in your phone - I recommend a ROM upgrade!
Boinng said:
That's a real shame, because it works perfectly with the HTC rom. I wonder what AT&T have done to cripple it?
I just tried mine in the office and despite being inside (though on the top floor) it still had me located in about 30 seconds. There's a real joy in having a full-on, reliable TomTom in your phone - I recommend a ROM upgrade!
Click to expand...
Click to collapse
tomtom just sucks without support applications i guess. I have dutty's april 16th and i get a fix within 10-30 seconds now. Yes, I as well can get a fix from my basement within a minute if I have used my tomtom outdoors within the last quickgps upload.
Can someone please help me?
I have tried these programs:
Tomtom 6
Tomtom 7
GPSdash
BeeLineGPS
WMMiniGPS
GPS tuner
Google maps
I'm using the latest TLR ROM. My GPS setting are default. Com4 Baud rate: 4800.
Here's the problem. The programs seem to find the receiver and seem to find the satellites. (10-15). But I can get absolutely no signal at all. Indoors or outdoors.
I'm getting quite desperate
Have you used any of the tweaks for GPS? I ask as I did but my signal kept dropping - so I turned the tweak off and now it is fine.
I would also suggest using the QuickGPS application to get the Satellite information quicker
I've tried disabling agps. Didn't help. And yes I have used QuickGPS... but no luck.
Any suggestions? : [
slicker said:
Any suggestions? : [
Click to expand...
Click to collapse
Was it the first try? When I tried first it was 6-8 minutes. Where do you try? In the outdoor?
Have you ever used it?
TB
Do you have correct setting "GPS is managed automatically" ?
When I set to GPS is managed manually, I could not found any way to power on builtin GPS. You have to check box "GPS is managed automatically". I think, it may be point of your problem
I had the exact same issue dude... TomTom 6 didn't work so I installed TomTOm 7... still no signal... even with QuickGPS ran...
Google Maps didn't work either....
I'm not sure what I did in the end... took out the battery, set GPS to 'let windows manage automatically' and ran Quick GPS again.. then run TomTOm 7, go to the 'GPS Status' screen which shows the sat signal charts and stand in a wide open area for 5 mins.. ever since then it has worked fine
all the best.
btw you have to make sure your system date and time are accurate coz otherwise it'll be searching for Sats with a wrong reference to the Sat almanac..
Yes, it's set to manage automatically. I've been trying to get a signal by the window, I left the device just sitting there for more than a half hour and still nothing. I guess I'll have to try longer while being outdoors. Hope it helps... but thanks for your help.
I did that too and it didn't work for me. You have to be outside for the 1st time GPS fix and make sure you run QuickGPS before that. Ohh yeah use TomTom 7 to detect the signal... I find that the most reliable somehow... and be sure it's configured to use the built-in GPS receiver...
I know it feels odd... I nearly sent my unit back for warranty because I was very convinced that the patch antenna was somehow disconnected from the chip. lol.
I had the same issue at one point, due to my fiddling and inadequate hacking attempts!
see if you can track down the HTC GPS tool (it's here on XDA somewhere, but i can't find a link at the mo) and run that.
Chipset should be set to Q7200 (yes i know its actually a 7201A but it works the same) and com port to com 4.
Tap the open port button and you should see the GOS info scrolling through the grey window in the program.
If you see nothing, check the external GPS settings
program tab should be com 4
hardware tab should be non and 4800
last tab should be ticked.
if you still get no GPS info scrolling through the gps tool, then it seems you have the same problem i did. Sadly, i had to hard reset it to get it working again, but it has been perfect ever since.
FYI, this started happening once i had turned aGPS on, and even turning it off did not work for me, so if you have to hard reset, i wouldn't bother ever turning the aGPS on again.
where's the option to turn aGPS on/off?
I just remembered how I resolved my issue... I put a SIM card in I had previously been trying to use it with WiFi (to update QuickGPS) but once I had a SIM in there, the GPS worked. Could it be because I'm now using aGPS? hmm...
you need to install schaps advanced config tool to get to the setting to turn aGPS on and off again.
it seems to be off by default btw.
rhedgehog said:
you need to install schaps advanced config tool to get to the setting to turn aGPS on and off again.
it seems to be off by default btw.
Click to expand...
Click to collapse
I also kept lossing the GPS signal with this on every few seconds. So I turned it off for good
did you maybe install voip on your diamond? If so that's your problem there. Hard reset you diamond don't install voip en there you go.
It worked! Thank you all.... I had to sit for half an hour in direct sunlight but it was well worth it... I'm new to gps... do you have to do this with every new gps receiver or is this just another great feature from HTC?
I'm, having the same probelm here.
I'm on my second diamond as the first one (a HK version) had a fault with the internal speeker. On the First phone the internal GPS worked fine with both TOMTOM 6 and Google maps. The initial setup only took about 30 secs.
With the new phone (UK spec) I have tried TT7, TT6 and Google maps. I have also run quiick GPS, hard reset and enabling and disabling assisted GPS using the advanced config tool.
Is there anything else I should try or is this likely to be another hardware issue?
Solution To Gps Problem
if you installed VOIP you should hard reset...gps dead...:-( no other solution.
Help! My Diamond GPS reception is MUCH worse than on my Touch Cruise
Hi,
I've just got a Touch Diamond, and the GPS reception is absolutely appalling. I have hard-reset twice, after which I've done nothing except download a QuickGPS update, but still the signal strength and its ability to connect to satellites is completely inconsistent and unreliable, even outdoors. I CAN get a good signal occasionally, but it's very rare. Most often I get no GPS signals whatsoever, or else I get just a couple of weak greyed-out signal bars in TomTom.
I can lay my Diamond down next to my Touch Cruise (both have identical TomTom 6 software loaded from the same CAB), and the Cruise always launches the app faster, finds the GPS device faster, AND finds adequate satellites faster. The Touch Cruise has a lot of problems, but the one thing it has always been very good at is GPS, and it has NEVER failed to find adequate satellites in TomTom 6, even indoors. It always takes well under a minute to do so, too. It's surely not unreasonable to expect at least the same level of performance from the next generation of device. Why should the Diamond's GPS performance be demonstrably so much worse?!!
Nine times out of ten, my Touch Diamond will simply sit there for an hour or more with the TomTom status bar reading 'Waiting for valid GPS signal...". Quite often when I open the GPS configuration option in TT6, it shows absolutely NO SHRED of a GPS signal whatsoever, even outdoors. (My Diamond and my Cruise have identical GPS settings in both Windows and TomTom, by the way).
The annoying thing is that the Diamond's GPS HAS worked on a couple of rare occasions, and the signal strength has been at least as good as on my Touch Cruise. The Diamond is much worse at holding the signal however, and is totally and utterly unreliable for navigation. It certainly isn't the 'Ultra-sensitive GPS' that HTC's marketing promised - it's nowhere near as good as the GPS on the Cruise, which is the previous generation! The Diamond's GPS DOES work well on very rare occasions - it's just that 95 times out of 100, I'm not getting anything at all. This makes me wonder if it isn't a WM 6.1 compatibility problem or a conflict of some kind. It's almost as if Windows is having difficulty activating/waking the GPS fully. When (and if) it finally gets going, reception is actually very good.
I have also downloaded the HTC GPS Tool as someone here suggested, and it reveals the same results as TomTom - I usually get either no satellites at all, or I get two or three red satellite status bars and a message saying 'Fix not available'. It ALWAYS shows a data stream coming from COM4 though, so there doesn't seem to be any problem actually finding the GPS device. On the rare occasions when I have got a usable GPS signal, the HTC Tool then shows two or three red status bars and three or four green ones as well. During those rare periods, Google Maps can also find anything from three to ten satellites, even indoors. However, the next few times I try the Diamond's GPS, nothing will happen at all - it's suddenly as if all the satellites have fallen out of the sky.
By the way, would QuickGPS make ANY difference on the Diamond? As other have pointed out, aGPS is disabled on the Diamond by default. Aren't QuickGPS and aGPS the same thing? I don't know. But if so, surely the QuickGPS data is useless on the Diamond?
Does anyone have ANY idea how to make GPS on the Diamond work as well as it does on the Touch Cruise? Does anyone know why it doesn't already? Has anyone else done a direct comparison between the Diamond and another HTC device using the same GPS software?
I really like the Diamond, but it's incredibly frustrating that the GPS is unreliable to the point of being unusable. At the moment, I'm having to carry the Cruise for GPS navigation and the Diamond for everything else! Certainly not what I paid for. It should do this stuff straight out of the box. Since it doesn't, I can only assume my device is faulty so if I can't get it fixed by the weekend, I'm returning it for a replacement.
Thanks,
Rob.
P.S. Sorry for such a long post, but I needed to vent.
Hi there, I'm having the same problem as RH Photography.
All the programs are trying to communicate, but no fix at all. Once I got a fix, but only 4 sattelites, when in my car GPS BT had fixed to 9!
Will try hard reset and install HTC GPS tool an try to fix
Hi all,
Could you please, be kind and post you experience with TD's GPS...
Since I got my TD(4 days) I have not been able to test the GPS at all
I have loaded some soft that could help me here. ( I travel a lot between Korea and Japan). Cannot really use the phone here, but WIFI works great and I thought I would give the GPS a test run.....no luck YET..
TD's own: QuickGPS has downloaded(through WIFI) all the info and it is up to date......But how do I set up the GPS itself???
Phone did not come with preloaded GPS software so,I have loaded following soft on itnone of them would recognize the gps)
i.e. " no GPS found."
1.Google Navigator 3.4
2.GPSvp (http://gpsvp.com)
3.Effica GPS Utilities (http://www.efficasoft.com/gpsutilities/index_wm_ppc.html)
I would really like to test out the GPS here first.I am returning to EU (home) in october or november and I would like to use it there as well.
sorry for the bump
I tried the search...not just this forum but all of XDA.....I cannot seem to find one successful step-by step activation as of yet???
Nobody has internal GPS running on their TD??
Anyone?
Runs perfect and is good quality.
Make sure you let windows manage gps (in external GPS settings):
programport COM4
hardwareport none
and in last tap check the checkbox.
Programs find gps at Com4 at 19xxx baud.
THX RIEL
thank You for you reply.
Will try tommorow morning.
Riel said:
Runs perfect and is good quality.
Click to expand...
Click to collapse
Don't you have a problem with the static navigation? This behavior "drives"
me nearly crazy, because beside of that, the GPS in TD is superb...
On mine, no programs can access the GPS and the programs will lock and crash the phone when it tries to connect to GPS.
The onlt one that does not lock the phone is TomTom, but it wont connect to GPS.
I've tried combinations of the recommended port stttings, but I still get no GPS.
I have not activated A-GPS, so I don't know if the phone came with this already activated - how would I check this?
My GPS is a pain in the arse, From what i have read its because of the static navigation. So far it says i live in house number 20 when I live in house number 16 and when i'm on route I'm yet to hear a " You have arrived at your destination" because its accuracy is off about 50 metres.
Hopefully there will be a fix for this very soon.
can someone get me up to speed a bit? what is the 'static navigation' that i keep hearing about..
admittedly, i find sometimes the gps is slightly less accurate at placing my exact location compared to my old Trinity, but otherwise its worked great for me..
PaulusUK said:
On mine, no programs can access the GPS and the programs will lock and crash the phone when it tries to connect to GPS.
The onlt one that does not lock the phone is TomTom, but it wont connect to GPS.
I've tried combinations of the recommended port stttings, but I still get no GPS.
I have not activated A-GPS, so I don't know if the phone came with this already activated - how would I check this?
Click to expand...
Click to collapse
Hey, have you got installed TomTom 7? I'm running TT7 and when I select "internal GPS receiver" it connects perfect. I know this doesn't exist in TT6, but I can also get my GPS running in TT7 if I set it to use a BT receiver on COM4 at 57600 baud. (Assuming you didn't mess around with the standard GPS settings, like HTC meant them to be )
Google maps is using the selection of "use windows settings".
racerx_ said:
can someone get me up to speed a bit? what is the 'static navigation' that i keep hearing about..
admittedly, i find sometimes the gps is slightly less accurate at placing my exact location compared to my old Trinity, but otherwise its worked great for me..
Click to expand...
Click to collapse
Check this thread out.
http://forum.xda-developers.com/showthread.php?t=402039&highlight=static+navigation
and this.
http://forum.xda-developers.com/showthread.php?t=401833&highlight=static+navigation
hi guys
Same problem here. AGPS is disabled. I have tried Garmin,TomTom, iGo and google. 95% of the time it can not lock onto the sats. Once in a while it will work fine. Last night it picked up the sats in my bedroom on the second story and this morning outside in clear sky it found 4 sats but with very low signal and could not give me my cordinates, gave up after 15 min.
I have tried GPS tools and even that won't lock onto the sats. Data is upto date with quick gps.
So is it the hardware problem or has it to do something with radio? It can't be faulty TD because there are a lots of people with the same problem, and why lots of other users have no problems accessing the sats?
How is your gps working?
hi
great going sofar...thanks to all. We still have no real answers.
Let's keep this one going.
Looks like GPS is an issue with TD.
( Other than GPS...I am loving this sweet phone )
Now I am trying different roms to see if it is related to that. Will let you guys know if find anything.
Strange, on all ROMS my GPS reciever just works perfect.
Almost the best piece of hardware on the device
As I mentioned in Another topic, I use the GPS for TrackMe, at the same time I am navigation via Igo, and at the same time I showoff Google Maps with GPS support.
It functions very well!
Did you get the GPS-Fix downloads? It speeds up a lot.
Yes got the gps fix downloads but still no go. Still have not lost the hope. I hope its not some hardware problem.
I was fed up messing with mine, so I did a hard reset, and its sorted ...... for now!
same as Paulus
I did a hard reset....and it works perfect. No other adjustments done.
Tried the TomTom, Tracky Pro, GPS VP, and the HTC GPS Tool....all work no problem...outside I get a fix within a minute sometimes seconds.
I think one of the quirks that the TD's GPS has is that, when it's in Acquiring Satellites mode it doesn't seem to spit out any sort of status. The first time I noticed that I thought my internal GPS wasn't working, since with my external Holux unit I can see the satellites which the Holux was trying to lock onto.
Whereas with the TD's built in GPS it just snaps from nothing to.. acquired. So it's hard to see wheter it hasn't gotten a signal because it's in a poor area of reception or not. Usually I'll just try and stay still till I can get a lock.
My gps only stays connected for a couple minutes then it looses its signa. I have to soft reset to get the gps to work again. could this an atenna issue?
EDIT:
So after hard reseting again and trying again, I've discovered that sometimes the gps will connect but sometimes it won't. If the GPS won't connect, I have to soft reset multiple times until it connect again. Then if I soft reset again, it sometimes doesn't work. So obviously it isn't an atenna problem, but I've got no idea what type of problem it is. Help!
supreme_one333 said:
My gps only stays connected for a couple minutes then it looses its signa. I have to soft reset to get the gps to work again. could this an atenna issue?
Click to expand...
Click to collapse
..which navigation program do you use?
Before the signal gets lost, will the screen be dark?
I have no problem with signal - 14 satellites even in the city (Prague) is nothing suprising...BUT! I'm experiencing quite big gps lag! :-( Tried lot of roms - stock WWE, tess v1.1-1.4, energy...same result - for example I'm driving through crossing but TomTom shows I'm at least 30m before it - it's about 1 second when I'm driving about 50 km/h...when I'm driving faster, it's much worse...especially when I was abroad that was really annoying
I use TomTom 7 but this problem also occurs with other programs like gps spot. My screen doesnt go black. Also sometimes my gps wont work even after a soft reset
lol, i have problem too - my gps works, but can't see any satellites
So has anyone found any sort of solution because GPS is kind of important and I use it a lot.
I use iGo. At first, I was also having problems finding a satellite. BUT ... after searching the menus in iGo, I found the settings for the GPS. like COm and baud rate. So what I did was to search the frequencies and it found something at DOM 4 etc. Every time I start iGo, I have to do that. Should find a menu for the GPS settings. Do an autoscan and enjoy. Hope this helps
georgeono said:
I use iGo. At first, I was also having problems finding a satellite. BUT ... after searching the menus in iGo, I found the settings for the GPS. like COm and baud rate. So what I did was to search the frequencies and it found something at DOM 4 etc. Every time I start iGo, I have to do that. Should find a menu for the GPS settings. Do an autoscan and enjoy. Hope this helps
Click to expand...
Click to collapse
Hmmm... iGO should memorize port and baud settings... Mine does...
I know it should. But every time I start iGo, the default is saved. That is, I think, port 1, baud 57660 I think :-?
georgeono said:
I know it should. But every time I start iGo, the default is saved. That is, I think, port 1, baud 57660 I think :-?
Click to expand...
Click to collapse
In that case I would recommend to add the GPS settings to your SYS.TXT:
[gps]
set_messages=0 ;optional - this setting stops iGO from changing NMEA GPS protocol settings
port="4"
baud="38400"
will do. Thanks a lot!!!
After further investigation and a hard reset, I've discovered that the problem occurs because of TomTom 7. Can anyone recommend another GPS Navigation program?
iGo = I use version Nav N Go iGO 8 R3 - v8.3.2.83157 (Apr 3 2009), but there is Nav N Go iGO8 v8.3.2.91972 (May 28 2009) which also works fine
Has anyone tried v8.3.2.93112 (Jun 8 2009)?
poor gps signal
Hello
I have similar problem lately. I say lately because my GPS signal was perfect! It would have at least 5-6 satellites fixed inside home even driving on Manhattan was perfect never lost signal while dedicated GPS device like tomtom one would not have signal. But lately for about month I have problem getting signal inside home even outside is problem sometimes. for example when I update weather on HTC sense it wont be able to get my location, also google maps wont be able to get gps location inside home and after a few min of waiting it will get outside, another problem is Nav N Go iGo 8 V 8.3.4 Aug. 13 2009 version. similar symptoms wont get gps signal inside house and loosing signal while driving on a wide open area where almost no trees and no buildings around. the strange thing is device is in perfect condition never dropped and use same stock Rom ever since it came out same radio and same Hard SPL. I did hard reset few times re-installed radio but problem is still here. I would have blamed Rom or radio if I was not sure they ever worked in this case I'm very sure it worked perfectly with those software before why wont it work same way now? is this antenna problem? anyone ever had to open HTC pure before? is there a removable GPS antenna that could become loose or bad connection? any ideas?