hello i was wondreing if wizrd has the automatically trained vocie dialing if not then can you get it from somewhere?
Microsoft Voice Command works great (although it is something of a memory hog).
Another alternative is Cyberon Voice Commander (I'm using it now and really like it) - Take a look at http://forum.xda-developers.com/viewtopic.php?t=45385
Enjoy!
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
Hi Does anyone know of some software that will allow me to speak to the PDA and it type for me?
Do some search on www.google.com and typ in Voice to Text PPC.
I did it and immediatly it came up with some good results.
For example: http://www.digitalfuturesoft.com/texttospeechproductsforpocketpc.php
That one is text to speech, not speech to text
I didn't think PPC would be able to run this sort of software, so I went looking. Problem seems to be that most results are for voice control rather than actual speech to text.
IBM via voice mobile seems to exist, but it seems more like voice control again. I also found something called Universal Translator which seems overkill.
Pocket Dictate, Dictaton 2005, SpeaktoText, etc...
spadbuoy said:
Pocket Dictate
Click to expand...
Click to collapse
Got me excited. However, is designed to "dictate directly on your Pocket PC using the buttons on the unit... tap send and the dictation will be compressed, encrypted and sent to your typist by email automatically."
Sadly, I don't have and can't afford a typist I suppose it would be possible to push it through a piece of desktop software, but then I could use "notes" or "voice recorder" which came with my kaiser.
spadbuoy said:
Dictaton 2005, SpeaktoText, etc...
Click to expand...
Click to collapse
Googled these - SpeaktoText and Dictaton 2005. Both are for desktops, not PPC
Maybe somebody can work with this; it's beyond my abilities.
http://www.programurl.com/software/sapi-speech-recognition-download.htm
http://www.programurl.com/embedded-speech-recognition-kit.htm
updates?
Anyone ever find anything worthwhile?
I use this on my tilt with 6.1
It works PDG. Needs some training but you can voice text, email notes etc.
Vlingo
http://forum.xda-developers.com/showthread.php?t=524612
Hey guys
Just bought a wing and downloaded VC 1.6 and I can't get the Caller-id announcing to work, when people call, I hear the ringtone and thats it....
I checked the setting and the voice commands concerning the voice button work just fine. Any help?..... or people with the same problems? Thanks!
If you bought Wing, that you choose wrong thread - this is WingS/S730.
Does anyone know how to switch on the voice announcement of contacts on L26's WM6.1 Diamond V9 ROM? The built in voice commander does not announce my contact when receiving an incomming call.
Dulal Alom said:
Does anyone know how to switch on the voice announcement of contacts on L26's WM6.1 Diamond V9 ROM? The built in voice commander does not announce my contact when receiving an incomming call.
Click to expand...
Click to collapse
Are u sure that cyberon has this option? I know that MS voice commander has it but dont know if cyberon has it too.
I'm sorry, I was just told by a friend that Cyberon Voice Commander does not has this option.
Does anyone have MS Voice Commander and know how to install it; get rid of Cyberon?