Exchange Sync Problem on Dutty's Newest 6.1 - Tilt, TyTN II, MDA Vario III General

I installed Dutty's newest 6.1 last night and cannot get Exchange to sync. I used the bundled connection setup tool to set for AT&T. When I start the sync, it comes to a screen that asks me for my Exchange password, but it won't accept it and keeps asking for it. I know I am using the correct password and I reset it just to make sure. I don't have this problem on my Treo when I set up Exchange sync. I tried changing the advanced connection settings from MEdia Net to My ISP and that hasn't worked either. Any ideas anyone?

ActiveSync Results:
Result: Access was denied. Choose Configure Server on the ActiveSync menu to check your server username and password.
Support code: 0x85010002

Halp? Please?

double check your exchange server settings, sometime or most the time you need ssl checked.Your domain correct as well.Also too u prob need the server cert installed to your device.
Google the support code

Related

Treo750, WM6 won't sync with server

Hi,
I just upgraded my Treo 750 with the AT&T WM6 build today. Everything seems to be working fine, except that I cannot sync with my company's OWA server. Activesync says that it's synching, but this goes on for a long time, then it stops and the message "Waiting For Network" appears at the bottom of the screen.
Others on the same server can sync fine with their devices, so it's not a server issue. I can download my GMail just fine so it's not an issue with internet settings.
Any ideas, or anyone having the same problem? I haven't been able to find related posts.
Thanks
Kevin
This may be of some help...
http://discussion.treocentral.com/showthread.php?t=151190
Please disregard this thread. I got it working. Thanks!
Same with me.
I Just upgrade my 750v to WM6.
But, now I cannot sync the with my exchange server 2003 SP3. (In WM5, I always sync successfully)
I always got an error : The security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server.
I even add the Secure DWord key (0) into HKCU/Software/Microsoft/ActiveSync/Partners registry. But error still shown every time I tried to sync.
Anyone can help me ?

SSL problem... with HyperDragon III

Hi all, I've got this rom installed, and for some reason I don't seem to be able to get on ANY https sites, OR sync over SSL to my exchange server.
I'm using Netfront 3.5, Opera 9 and IE.
None of them work
Active Sync says:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
Last Syncronised: None
Last Attempt: 7:30pm
I think I may have fixed it. I noticed that my T-Mobile connection was using a proxy. I have unticked this and now I can sync with exchange and do my online banking.
Is it ok that I've unticked this?
Cheers,
DJ

Exchange Error 0x8501004 Any ideas?

Every time I try and sync I get the error code 0x8501004 ... I have no idea why or how to fix this, I've done searches and everything and nothing helps.. I have a feeling it has to do with me not having a certificate.. any ideas?
Thanks
There has to be exchange experts here $10 for ne1 that can help.. problem may be my corporation may not allow mobile devices, but i dont know if thats 100% true or not..
Is there a work around to fix this if my corporation doesn't allow it?
Thanks
On ocassions I've struggled to link to an exchange server, I've had to disable to the proxy server in system->connections tab-> connections->manage my proxy server and untick this connection uses a proxy server.
Is this just syncing with your PC or with an exchange server?
ateyercheese said:
On ocassions I've struggled to link to an exchange server, I've had to disable to the proxy server in system->connections tab-> connections->manage my proxy server and untick this connection uses a proxy server.
Is this just syncing with your PC or with an exchange server?
Click to expand...
Click to collapse
Just an exchange server.. I think they may have blocked mobile access to the exchange server.. Do you know if there is a way to forward my email/calendar/etc at exchange speeds to bypass the mobile block? or any way to bypass it?
You must be granted to access the Exchange server with a mobile device and your company must have set up sync with the Exchange server.
gdisselkoen said:
You must be granted to access the Exchange server with a mobile device and your company must have set up sync with the Exchange server.
Click to expand...
Click to collapse
There are no work arounds? even if I can access exchange via IE?
http://www.google.nl/search?hl=nl&q=0x8501004+++active+sync&meta=
Should give you enough reading material. What does eventviewer say on your exchange server ? Any error messages in your eventlogs
try to enable ssl?
a workaround may be to set up auto email forwarding to a pop3/imap account. yo can do that from your desktop pc.
at least you are able to receive all incoming items.
sending email would also somehow work if you put your company's email in the reply address field.
I came across this issue recently, what rom are you using and what software do you have installed?

Email connection problem

Hi
I've been trying to setup an IMAP account on the built in email. But can't seem to connect to it, it says:
"Cannot connect to the incoming mail server. Be certain that your login information is correct, then try again to send and receive email"
But I'm definitely sure all email account info is correct.
Wierd thing is, when I go back to the email Accounts setup, I notice the password there rather than ******* 7 characters long password it is like ********************** 20 characters long. I've tried changing back to the real password, but still don't work and if I check the Accounts setup again, the password, again shows really long like ***********************
I've tried accessing my IMAP email account through the internet on the phone via Opera, and that's working OK.
Any ideas?
Mmmm...
Can't really help you with your settings, but I can answer one question for you. The masked password is always a long string of ****'s. This is so no one can guess the actual number of characters in your password.
I've never set up an IMAP account, as I use POP3. I had an issue years ago when I was first trying to figure out how to set email up on these things, but I'd just got the incoming pop address wrong. I went on the internet and Googled the proper settings. Sorry I can't be of any more help
During the email set up there is a link for Advanced Server Settings. There there are settings for Require SSL for Incoming/Outgoing email. You might try toggling those. It depends on the IMAP server setup. Which IMAP server are you trying to connect to? I run my own IMAP server. The difference between IMAP and IMAPS (i.e. with SSL) is that you connect on a different port. If your IMAP server only accepts IMAPS then it's listening on one port but you're asking on another.
I've noticed that the email doesn't work when using activesync for network, but it's fine if using WiFi for example.
Actually, the problem is probably Activesync itself, as I have network problems with it... Activesync seems unable to remember proxy settings, its like it works after the initial setup , for a few minutes, then any proxies that were setup there are gone a few minutes later, just dissappears and consequently the network won't work anymore until I manually set it up again

HELP! Problem creating an exchange mail account

hi all,
I have some strange issue creating a new mail account, an MS Exchange one.
I follow the Diamond's owner's manual chapter 7, I set my address and password (next) clear the "get setting automatically" (next) and then I should be able to choose e-mail provider type to be exchange, but the only 2 options I have are "internet e-mail" and "custom domain" both bringing me to imap/smpt etc settings and not the exchange ones -> consequently the account fails to connect to the server and fails to synch.
I'm not sure if it is important, but my Diamond has no problem synching with my local Outlook, so the failure is with the server connection.
The connections I tried were both WiFi and USB,
Rom 2.03
Radio 1.09
PLEASE HELP.

Categories

Resources