HELP! Problem creating an exchange mail account - Touch Diamond, MDA Compact IV General

hi all,
I have some strange issue creating a new mail account, an MS Exchange one.
I follow the Diamond's owner's manual chapter 7, I set my address and password (next) clear the "get setting automatically" (next) and then I should be able to choose e-mail provider type to be exchange, but the only 2 options I have are "internet e-mail" and "custom domain" both bringing me to imap/smpt etc settings and not the exchange ones -> consequently the account fails to connect to the server and fails to synch.
I'm not sure if it is important, but my Diamond has no problem synching with my local Outlook, so the failure is with the server connection.
The connections I tried were both WiFi and USB,
Rom 2.03
Radio 1.09
PLEASE HELP.

Related

Unbale to retive pop3 mail after upgarde to AKU2. !!

All the settings are correct, Internet is working fine, ie able to browse sites etc. get message:
Unable to connect to the incoming mail server, Verify that the server name is correct.....
The server name and usrid are correct.
This is using outlook.
Everying else is great Any suggestion please.

Exchange Sync Problem on Dutty's Newest 6.1

I installed Dutty's newest 6.1 last night and cannot get Exchange to sync. I used the bundled connection setup tool to set for AT&T. When I start the sync, it comes to a screen that asks me for my Exchange password, but it won't accept it and keeps asking for it. I know I am using the correct password and I reset it just to make sure. I don't have this problem on my Treo when I set up Exchange sync. I tried changing the advanced connection settings from MEdia Net to My ISP and that hasn't worked either. Any ideas anyone?
ActiveSync Results:
Result: Access was denied. Choose Configure Server on the ActiveSync menu to check your server username and password.
Support code: 0x85010002
Halp? Please?
double check your exchange server settings, sometime or most the time you need ssl checked.Your domain correct as well.Also too u prob need the server cert installed to your device.
Google the support code

Probelms sending Yahoo Mail

I can recieve Yahoo email, but I can't send mail from the yahoo account. The phone set up it's own settings. Here they are
Incoming Mail Server
imap.mail.yahoo.com
Account Type
IMAP4
User name
MY EMAIL ACCOUNT
Password
Way longer than it should be (I keep fixing it, but there are about 20 characters showing, when my password is only 11 characters)
Outgoing (SMTP) mail server:
smtp.mobile.mail.yahoo.com
I dont have
"OUtgoing server requires authentication" checked. It was but I tried unchecking it to see if that would help and it didn't.
I do have
"Use the same username and password for sending email" checked
I have it set to send/recieve email every 5 minutes.
Message Format
HTML
Message Download Limit
Entire MEssage
Download Atachments
All Atachments.
I have an ATT Tilt with the new 6.1 software. I haven't done any modifications only because I dont know how to.
Anyone? Now my gmail isn't letting me send mail!
Try this, Delete all your e-mail settings and start from scratch. See if it works
I have done that---lets hope that works.
Hi:
If you still have problems, try this. Do you have "Getting Started" in programs. If you select that, then choose to setup e-mail. All you have to do is enter your e-mail address, and password, and allow it to use automatic setting. I didn't even have to enter any settings, and it worked perfectly for me.
Hope this helps.
itsnowornever said:
I can recieve Yahoo email, but I can't send mail from the yahoo account. The phone set up it's own settings. Here they are
Incoming Mail Server
imap.mail.yahoo.com
Account Type
IMAP4
User name
MY EMAIL ACCOUNT
Password
Way longer than it should be (I keep fixing it, but there are about 20 characters showing, when my password is only 11 characters)
Outgoing (SMTP) mail server:
smtp.mobile.mail.yahoo.com
I dont have
"OUtgoing server requires authentication" checked. It was but I tried unchecking it to see if that would help and it didn't.
I do have
"Use the same username and password for sending email" checked
I have it set to send/recieve email every 5 minutes.
Message Format
HTML
Message Download Limit
Entire MEssage
Download Atachments
All Atachments.
I have an ATT Tilt with the new 6.1 software. I haven't done any modifications only because I dont know how to.
Click to expand...
Click to collapse
Also, did you check the Advanced Settings for your setup? Mine has "Require SSL for Incoming e-mail" and "Require SSL for Outgoing e-mail" unchecked. I am able to send/receive via Yahoo! without problems. Definitely follow everyones advice and start from scratch.
I had the annoying issue of not being able to send, only being able to receive mail.
This was with Gmail.
I tried all the 'solutions' on the Internet and even on Google's own support pages.
Strangely, I could use the POP3 service, but not IMAP.
The way I solved the issue was to delete all the settings on my Kaiser and then go into Gmail 'Forwarding and POP/IMAP' options and Disable IMAP access and click Save Changes.
Then I would go back into the options and reenable IMAP access.
Lo and behold, it worked.
Here is a supposed fix for SMTP issues, use at your own risk, I haven't had any problems so I haven't used the fix myself. http://www.tracyandmatt.co.uk/blogs/index.php/2008/10/15/windows-mobile-smtp-fix

Email connection problem

Hi
I've been trying to setup an IMAP account on the built in email. But can't seem to connect to it, it says:
"Cannot connect to the incoming mail server. Be certain that your login information is correct, then try again to send and receive email"
But I'm definitely sure all email account info is correct.
Wierd thing is, when I go back to the email Accounts setup, I notice the password there rather than ******* 7 characters long password it is like ********************** 20 characters long. I've tried changing back to the real password, but still don't work and if I check the Accounts setup again, the password, again shows really long like ***********************
I've tried accessing my IMAP email account through the internet on the phone via Opera, and that's working OK.
Any ideas?
Mmmm...
Can't really help you with your settings, but I can answer one question for you. The masked password is always a long string of ****'s. This is so no one can guess the actual number of characters in your password.
I've never set up an IMAP account, as I use POP3. I had an issue years ago when I was first trying to figure out how to set email up on these things, but I'd just got the incoming pop address wrong. I went on the internet and Googled the proper settings. Sorry I can't be of any more help
During the email set up there is a link for Advanced Server Settings. There there are settings for Require SSL for Incoming/Outgoing email. You might try toggling those. It depends on the IMAP server setup. Which IMAP server are you trying to connect to? I run my own IMAP server. The difference between IMAP and IMAPS (i.e. with SSL) is that you connect on a different port. If your IMAP server only accepts IMAPS then it's listening on one port but you're asking on another.
I've noticed that the email doesn't work when using activesync for network, but it's fine if using WiFi for example.
Actually, the problem is probably Activesync itself, as I have network problems with it... Activesync seems unable to remember proxy settings, its like it works after the initial setup , for a few minutes, then any proxies that were setup there are gone a few minutes later, just dissappears and consequently the network won't work anymore until I manually set it up again

[Q] Q: Simultaneous use of two APNs [Froyo 2.2.1]

Is this possible to have two email accounts using different APNs for synchronizing emails?
In particular I'd like to have my google account to synchronize via "regular" internet APN while my work (Exchange active sync) to synchronize via different, dedicated work APN.
I was able to configure both APNs, but when I select one (in config -> comm -> internet apn) only one of the accounts gets sunchronized (and when I switch the selection only the other account gets synchronized).
I WinMo I was able to indicate which email schould synchronise via which APN and I was able to have both APN active at the same time, and everything was fine* meaning both account were synchronizing in parallel.
Can something like this be set up on Froyo?
Any help/suggestion is very welcome...
Pinch
*) despite the fact WinMo is crap

Categories

Resources