LongPress IE - Tilt, TyTN II, MDA Vario III General

I have been searching for a little while and I have seen where people claim to have mapped the longpress for the IE button but nothing to show how it's done. I have successfully remapped almost every other button but I can't seem to find anything on the bottom IE & OK buttons. Any ideas or just a point toward the right post.
Keys I want to remap the most are.
Windows Long - Live Search
IE Long - Minmo

AE Button might be able to help you.
http://ae.inc.ru/aebplus.php

Get AE button plus.

I am not being cheap. Is there a reg hack that I can do?

Related

Configure Press and Hold for other buttons

I am currently using Dutty's newest rom. For the PTT button I am able to define what happens when I hold the button.
I would like to add the ability to close the program when I hold the OK button (button 4). Is there a good way to add the (hold) option in the button settings for all buttons?
Thanks,
-Dan
For ALL buttons? Even the camera? Then what? How will you take pictures?
Have you searched? Someone wrote a program to do this, I read it yesterday. Try searching. I know you are new, but the search button will be yoru friend.
Well, I guess not all buttons. I just would like the option to configure two things for each button.
Through my search I found AE button. I tried that, but was unsuccessful to get it to work properly. I am attempting to remap the side OK button. Remapping the "OK" button only applies to the front OK button.
I think more of my issue is that I am trying to remap the side button, is that possible? I imagine many people would love to be able to close programs using this button.
I hate to be so wrong, so quickly.
My mistake, AE button is exactly what I was looking for it. I was remapping the wrong button. Although it isn't easy to use, I recommend it to all.
I would prefer a reg-tweek to add the option to the buttons dialog, but this will do.
http://forum.xda-developers.com/showthread.php?t=356322
This is the simplest and non 3rd party way to remap your buttons for long press. No need to install a program.

How to disable inner "soft" keys

How can I disable these?? The keys above and between "I" and "O", and between "R" and "T"? I hate them. I type incredibly fast and happen to blunder on them at least once per message, email, etc...
I've tried to change my typing style, but that isn't 100% effective and only slows me down.
I would like nothing to happen when I push them. I also do not use the "soft" buttons above the IE and Mail buttons. I don't have issues with accidentally hitting them, though. But if they get disabled with the ones in the full keyboard, it won't bother me (not sure if they're tied together).
I only want the actual onscreen soft buttons to work. Can anyone help?
By the way, I went into Settings > Personal > Buttons, but only 6 are shown (not counting "push and hold").
There are a total of 13 buttons on this thing if you include the push button on the wheel, and don't count the keyboard mappings. 11 buttons if you count the front and inside soft buttons as only 2....
I am currently searching for a solution to the same problem for the same issue. I cannot even count how many times I have accidentally hit the send button when all I wanted was the letter.
I am not that an incredibly fast typist, though.
I use AE Button Plus and this allows you to remap all of the keys to other things as well as map one, two and three presses along with long press.
You could use this to remap one press of the softkey to nothing and two presses to activate the softkey. This would mean that you would have to press them twice to make them work, but would stop teh accidental presses.
dryden said:
I use AE Button Plus and this allows you to remap all of the keys to other things as well as map one, two and three presses along with long press.
You could use this to remap one press of the softkey to nothing and two presses to activate the softkey. This would mean that you would have to press them twice to make them work, but would stop teh accidental presses.
Click to expand...
Click to collapse
Would that have the same affect on the "onscreen" soft buttons (touch screen).
I've just had a quick play and it appears to only affect the hardware buttons, which, I think, is what was originally wanted.
It's a good program, I use it a lot and it's FREE!
Is there nothing someone maybe found to disable these in the registry. I also hate these buttons too.

Remap OK Button to Rotate Screen?

I'm interested in remapping the ok button (the one on the side, below the scroll wheel, not the one below the end key) to rotate the screen. However, I can't seem to find out how to do anything at all with this button. Can anyone help?
i'd like this also.
I'm wondering if maybe this has to be done within the registry?
i remember reading in a thread before this that the remapping was not possible for that OK button... but i am not sure i could be wrong
try hbutton. it lets you map about anything to the hard buttons. you can map multiple programs to one button too. i use it to map the OK button to close a program, open htc audio, and screen rotate.
http://forum.xda-developers.com/showthread.php?t=306794
if you are referring to the ok button on the front of the kaiser, i remapped that button to rotate the screen from; settings>buttons. i am, however, using a sim free htc tytnII. this may not be available in the network branded versions. hope this helps.
sorry misread your post, you were talking about the side one. doh! no i couldn't remap that one either.
at this moment no one can really find the registry for that button. people have tried, i read about 3 posts that had people trying and they were unsuccessfull
i am still also interested in getting that button remapped
AE button plus will remap the side button, except if you are on the today screen, where a press of the button will bring up the start menu.
i currently have it to turn off the phone, since i friggin hate how htc made the real power button so flush with the body, so that if i'm on the today screen, i press it twice quickly to power off the device. the first press brings up the start menu, then the second press will take the focus off the today screen and implement your action. likewise, hitting the side button will turn off the phone if i'm in any sort of application or anything non-today screen.
and mapping this buttom also maps the keyboard ok, so now i'm suddenly without a keyboard ok button
What exactly is this Side Ok Button for anyways? It doesnt act as a confirm button
I would also like to remap the OK button to rotate screen. When I am using Garmin I like to have it rotated for cradle and visual purposes.
Also, don't know if anyone ever noticed this. I have polarized sunglasses, and when my phone is facing up and down like in portrait mode it is not as bright as it could be, but i rotate it like it is in landscape mode and I can see perfect with them on. Weird!
Let me know if this doesn't work out. I wrote apps for the Universal once to assign to any key. But that was a long time ago. I'm sure better solutions exist now.
V
You can do it for sure with SPB Pocket Plus & the Shortcut Add-in/Plugin.
I actually made an action sender for this purpose, for another button, but if I get some time , I'll pull out my old work & look.
But SPB PP does allow it for sure. You can map two of anything to that button, one for press & one for press & hold.
Anything new on this?
I've tried some different things...still nothing.
another bump...
bump it up again...anyone know how to remap the OK button (forget the rotate screen)?

Help: Want to remap hard button

Hi all,
Anyone can help to remap the hard button??
I want to change the Home key to Alt-tab, and the Back key change to OK/Close (1 press for ok and long press for real close the application). I have tried AE button plus, but not function very well.
Attached is the Alt-tab s/w i have used.
Don't know why HTC put a Home and Back key in WM pro device
Thank you very much,
did you reset the device after you changed the settings?
yes, but still doesn't work
There's a software called Hbutton. You might wanna try it.
Just tried Hbutton, but it doesn't work on diamond.........
Awww.. now how am I gonna survive on the diamond without Hbutton?!
There's another software called SmartSkeys (or something oike that) Not sure of it'll work.
Anyone got any suggestions on which software to use to map diamond buttons to many functionalities?
This one works on Diamond: AE Button Plus.
To my understanding from testing AEButton on the Diamond, I have realized that:
The HOME key cannot be remapped.
The Back key is essentially a "WIN" key. You can create a new button and remap the Back key. HOWEVER, the shortcuts DOES NOT WORK when you are at today screen. So here is what I do, I remapped the Back key single click to "Escape". double click to close program, long click to close all programs.
Thats the only logical thing i can think about using the back button due to the limitations.
Any ideas?
Escape = ok/close ?
With AEB Plus I managed to map "action long" to "task manager", but the setting doesn't seem to survive a soft reset.
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Tried AE Button Plus 2.6.3, the "ok" button in AE Button Plus list can refer to back key, my setting is press 1 to minimize, long press to close current application. However, AE Button Plus can't handle the Home button. I already sent a request to them, hope their next version can sort it out.
I'm posting here to find this later. I use AEB on all my devices and want a Diamond. Hopefully it gets "worked out".
tkhs said:
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Click to expand...
Click to collapse
Yes, the mappings worked when TouchFLO was disabled. But when TouchFLO was enabled again, the mappings then didn't work.
Can someone please help me?
I use a golf GPS/Scoring program on my diamond (mobile golf scorer) and on it there is an option to use hardware button to turn display on/off, this keeps the gps active permantly. Its mapped in the program as 'button c' which from what i can tell should be the 'right hardware button' on a usual ppc.
I'm trying to map it as 'back button' using AEBPlus but it will only work on the main diamond screen or 'today' screen. I've tried mapping it to various buttons on the diamond but When i start the golf program it does not work.
Has anyone any ideas? I need to remap a button that will turn the display off no matter what i'm running.
Thanks again
I'd love to change the function of the "Back Button" aswell,
it has been annoying me since the first day I got it.
HButton seemed very promising, but sadly, it doesn't work.
Do hardware keys also have a registry number like the softkeys?
Like 112/113 for the softkeys?
Wondering anyone will use "Home" and "Back" button regularly....Maybe u guys can share your experience on how to smartly use this 2 buttons as I don't have any idea.........
Hello everyone!
This topic is very actual especially on all russian forums (hpc.ru 4pda.ru 4pda.info). Did anyone overcomed this difficulty with remapping hardware buttons? I tryed AEButton Plus but I was unsuccessfull in remapping the dimaond's "back" button - is there any one who did it? Please share the experience - it would be very very usefull to remap this button and to bind it to launching Dynamo3 task manager.
Thanks in advance.
ILya.
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
aydc said:
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
Click to expand...
Click to collapse
so this method willn't work too? http://forum.xda-developers.com/showthread.php?t=355141
the silly part on the htc side is to have 3 of 4 hw buttons do almost the same - if you are in an application, pressing home, back or hang-up button will act as "escape". am i wrong?
for one thing, it would be at least useful to have an "ok" button.
the ideal setup for me would be to use the "go to the tf3d home tab" function of the home key by pressing the "hang-up" button and use the home key as "ok"...

Missing buttons in settings

Hi i have a problem with my MDA IV Compact. I searched the forums but found no answer to my problem.
I want to do some basic button remapping and so i go to settings -> personal -> buttons and guess what. There are NO buttons listed in the buttons list.
Has anyone come across this before and if so can you help me solve it? I mean there are only few hardware buttons present in diamond its a shame not to be able to map them.
Button mapping...
The only button you can map by default is the long press of the 'dial' hardware key. This should be showing in your button list as 'Button 1(Hold)'. There is an application called GScroll available here, which lets you map the four hardware keys by touch (double tapping them). Not exactly what you're after, but it's all I can think of to help you out
thats thing. i get NO buttons on my list gscroll looks nice. too bad its not free ware. but its cheap so i may get it.
you can use dredsensor
this tool allow you to remap buttons depending on running programs
No, no, no!
Diamond CAN have its call key remapped via Windows.
I had the opposite; a glitch entry appeared in the buttons list.
I am attaching a reg-file which will bring back the call button mapping. But be careful, this comes from Windows with localization patch.
Or, you can hard reset. If MDA CIV ROM creators didn't remove it intentionally, it should be there.

Categories

Resources