A while back I posted thread with regards to a ringtone manager that would allow me to play whole .mp3 files for my sms notifications off my storage card. After trying mortring, mring, phone alarm, photo contacts pro, and a few others, I settled on mring as it seems to be perfect for me.
But it does leave me with one problem, one that came with my Tilt: My sms notification ringers don't stop playing until the song is over.
I want to make the file stop playing once I open up the notification or dismiss it. My old Motorola krzr did this, so I don't see a problem with it being possible. I just need the registry tweak to do it.
Below, I have pasted an bolded some tweaks I think look relevant. These are clearly for phone calls, but if I could find the registry entry for sms notifications and then drop in something behind the 'p' code to say stop on answer, I should be able to do what I want...right?
Any help would be greatly appreciated. I think mortring stops the notification...but I just don't know how to do this on my own. It seems like it should be pretty simple, but after 10 days of searching, I'm at my wits end.
Stolen from this thread: http://www.pocketpcaddict.com/forum...ngtone-vibrate-led-flash-characteristics.html
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
Also, I would like to change the default location the alarms look at to the storage card as well within the registry.
Thanks in advance.
As always, I am a moron. The scroll wheel shuts off the notification of a sms message so my first question is handled.
As for the second question, all I would like to do is use my .mp3s on my storage card as ringers.
Related
Is it accomplishable at all with the Kaiser? I don't like the NON Stop vibrate.. but if theres any way to change how it vibrates (ie: pulse) that would be GREAT.
Thanks
dpmisk said:
Is it accomplishable at all with the Kaiser? I don't like the NON Stop vibrate.. but if theres any way to change how it vibrates (ie: pulse) that would be GREAT.
Thanks
Click to expand...
Click to collapse
I don't wanna know any more info.....
dpmisk said:
Is it accomplishable at all with the Kaiser? I don't like the NON Stop vibrate.. but if theres any way to change how it vibrates (ie: pulse) that would be GREAT.
Thanks
Click to expand...
Click to collapse
I agree!! I keep my phone in my front pocket (get your minds outta the gutter!!), and the non-stop vibrating notification isn't as noticeable as my pulse-vibrating razr. I know that you can customize the notifications, but the shortest vibration is 1 second. When you soft-reset the phone, there is a quick vibration, so it appears that pulse vibrating IS possible. It's just a matter of how.
ehaley01 said:
I agree!! I keep my phone in my front pocket (get your minds outta the gutter!!), and the non-stop vibrating notification isn't as noticeable as my pulse-vibrating razr. I know that you can customize the notifications, but the shortest vibration is 1 second. When you soft-reset the phone, there is a quick vibration, so it appears that pulse vibrating IS possible. It's just a matter of how.
Click to expand...
Click to collapse
Sorry, my mind is in the gutter and that just sounds rude - lol
But if you find an answer share the wealth
ive also been looking into this, all i came up with was this information which suggests that (after playing with various different scripts) that you cant get the vibration to turn on then off(wait) and on again while the ringtone is playing, it seems that the ringtone must play all the way through before it steps over to the next code in the script so from a regisrty point its an either or case right now.... anyway have a play.... maybe theres another way in which we can get the vibrate to execute from a different script than the ringtone...
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
anyone figure this out?
I have been playing with these settings and what I ended up with was no vibrate at all. Moreover it seems to reset to original script every time you switch between call notification modes. Something of this sorts seems to be acomplished with kaiser tweak (vibrate 3x and then ring) but it is not quite it. And you cannot permanently change registry script for this either.
So, so far tough luck.
so nothing at all?
SOLUTION
it's possible look:
"I made pulse vibration i'm missing such vibration in incomming calls so much.."
http://forum.xda-developers.com/showthread.php?t=279777
" pulse vibrations style and longer time up to 30 seconds"
http://www.jgui.net/phoneprofiles/
looks like sorg did it??
pm just sent PM...
hope for replies soon
This is from another thread. It works for me. You must install MortScript in order to make Treovibe work completely.
rainersnookh said:
Never like that continous vibe either.
Here's a nice solution that I use. Treovibe.
You can make the phone vibrate just as u want it to with a bit of tweaking.
http://discussion.treocentral.com/showthread.php?t=138234
Oh, and you will need MortScript too.
http://www.sto-helit.de/index.php?module=download&action=view&entry=65
Click to expand...
Click to collapse
i wanted to know if there was a way to lower the volume when im dialing the number. its as if my speaker is about to blow when im trying to dial a number. anyone know the registry edit?
Never did get a sloution for this, except by covering the speaker with my finger
Would be interested to know if there's reg hack, then we could pass it to the Kaiser Tweak guys!
There may be 3 ways to improve your situation.
The first would be to change from long tones to short tones. This wont reduce the volume, but if you have it set on long, it will shorten the amount of time the tone is emitted.
(Phone>Menu>Options> then change keypad to short tones)
The secdond would be to do the same as above, but to change it to "Nothing"
The third would be to turn t vibrate using KaiserTweak (a great app by the genii of xda-dev.com) where there is a setting to change the phone keypresses from tones to vibrate (KaiserTweak: Call > Dialer Button Behaviour"
u can also click on the speaker icon and bring down the volume for the mobile icon. but this will reduce the overall volume of ur device.
rjcb23 said:
The third would be to turn t vibrate using KaiserTweak (a great app by the genii of xda-dev.com) where there is a setting to change the phone keypresses from tones to vibrate (KaiserTweak: Call > Dialer Button Behaviour"
Click to expand...
Click to collapse
i dont have this option on my kaiser tweak
make sure u update your xml file, provided by nikagl
i have the one from dec. 9 and even on his post under calls it doesnt show a Call > Dialer Button Behaviour"
http://forum.xda-developers.com/showthread.php?t=349009
thats the latest, and i just checked there is no dialer button behavior.
Only solution i can think of is that you would need to turn down the system volume, since it is a system sound. However, you can try searching for the dialer sounds, modifying them with a sound editor(decrease the amp, or something like that.) so you can keep your system volume up, while dialer doesnt deafen you.
ekw said:
http://forum.xda-developers.com/showthread.php?t=349009
thats the latest, and i just checked there is no dialer button behavior.
Only solution i can think of is that you would need to turn down the system volume, since it is a system sound. However, you can try searching for the dialer sounds, modifying them with a sound editor(decrease the amp, or something like that.) so you can keep your system volume up, while dialer doesnt deafen you.
Click to expand...
Click to collapse
If you looks through the Kaiser Tweaks thread, it's in there. Not in the actual xml thread, but in the one where you post questions. You could try searching vibrating keypad and variations of the like. He actually made an xml file for it, and it's posted in that thread, he just didn't include it in the official release.
I tried it out, and it seemed to work fine. Like a dummy, I stopped using it, because I thought it would no longer work with automated systems (like checking voicemail etc.) but then I realized the sound I hear has nothing to do with the info transmitted by the phone lol, so I may have to give it another try.
i found the right XML file with more tweaks than i had...for those that want it here it is
Lovely - I hadn't noticed the Tweak update - All quiet now!
How do I get the flip back? Something happened with something I uninstalled. But now I can't seem to get the phone to mute ringing when I turn it over. Is there a registry that needs to be changed back that the uninstall of the program didn't do? Please help since I keep my phone on in meetings and my family needs to be able to reach me all the time.
Hiya,
You could try checking the following in registry:
Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1"
See if this helps.
Cheers,
D.
there's a second value as well. Here's something on it step by step: http://www.fuzemobility.com/?p=903
TouchFlo 3D Config has a switch for it...I don't like browsing registry
Hi All,
When dialling a call, the HTC turns off the screen 5 seconds after the call is connected forcing me to have to press the Power button in order to display the 'In Call Status' window so that I can select the Keypad button to enter the voice mail access code. Additionally, listening to Voice Mail messages and pressing keys is extremely difficult as when I move the phone to my ear to listen to the Voice Mail, the screen blanks out and I must press the Power again to get the Keypad.
Ideally, I would like the screen to remain on between 30-60 seconds so as to allow interaction with the keypad ... such as in Voice Mail.
I've looked at several threads here and on other sites recommending changes to the RIL, Phone, and BackLight registry keys and I have tried some utilities such as 'AdvanceConfig 3.3', 'Kiaser Tweaks 0.41', and 'Diamond Tweak 0.5.3' to name but a few... no luck! At one time, it seemed like I was on the right track with the registry changes ... but the changes actually reduce the delay time to 1 second.
To rule out the possibility of a bad phone, I tested my wife's touch as well ... same result - purchased to identical units; makes it easier to support.
I would greatly appreciate any insight from seasoned experts.
Advance thanks,
Reference URL
http://forum.xda-developers.com/showthread.php?t=413798
-------------
ROM Version: 1.90.707.1 WWE
ROM Date : 08/01/08
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U
hilaireg said:
Hi All,
When dialling a call, the HTC turns off the screen 5 seconds after the call is connected forcing me to have to press the Power button in order to display the 'In Call Status' window so that I can select the Keypad button to enter the voice mail access code. Additionally, listening to Voice Mail messages and pressing keys is extremely difficult as when I move the phone to my ear to listen to the Voice Mail, the screen blanks out and I must press the Power again to get the Keypad.
Ideally, I would like the screen to remain on between 30-60 seconds so as to allow interaction with the keypad ... such as in Voice Mail.
I've looked at several threads here and on other sites recommending changes to the RIL, Phone, and BackLight registry keys and I have tried some utilities such as 'AdvanceConfig 3.3', 'Kiaser Tweaks 0.41', and 'Diamond Tweak 0.5.3' to name but a few... no luck! At one time, it seemed like I was on the right track with the registry changes ... but the changes actually reduce the delay time to 1 second.
To rule out the possibility of a bad phone, I tested my wife's touch as well ... same result - purchased to identical units; makes it easier to support.
I would greatly appreciate any insight from seasoned experts.
Advance thanks,
Reference URL
http://forum.xda-developers.com/showthread.php?t=413798
-------------
ROM Version: 1.90.707.1 WWE
ROM Date : 08/01/08
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U
Click to expand...
Click to collapse
when you use the registry tweaks you usually need to do a soft reset, and then the changes take place on bootup.
Hi mikemorris,
Agreed, I've even gone as far as shutting down - Long Power Press. I also have made the registry changes one at a time and captured the before/after settings.
Cheers,
Backlight timeout on calls fuze
I have also tried all the registry tweaks to extend the backlight on calls to something over 5 seconds.....
All my registry changes "TAKE" OK as seen after checking...
The performance changes work great...but not this backlight on calls...
Any fix yet??
Ron De Silva
Try this thread
http://forum.xda-developers.com/showthread.php?t=488991
I'm new to tasker & using both tasker & tasky to learn. I imported a profile "answer customer" taskernet. I only needed to put in a phone number to have it pick up. However it's not picking up.
What I'm looking for is, automatic pick up of specific phone number, pause .500 milliseconds press dialpad, pause .500 milliseconds press 1
Seems pretty easy, I'm just not getting it though.
Any help would be greatly appreciated.
Android 12 / One UI 4.1 Fold 3 unrooted