Database Develop

Tomtom 5 and Wired Tomtom GPS Receiver

I thought I would add my tuppenyworth to the Tomtom problems with the XDA 2i. Bought a wired Tomtom "Official" GPS receiver for it and tried it with TT5 to no avail. It would not recognise the receiver at all no matter how I tried to specify it's com ports etc..
I eventually upgraded to TT5.1 and it worked immediately with no problems at all. Been working fine ever since.

if it matters
hi, i have a xda 2i and use tomtom 5.20, when i use my wired gps i was told to switch off the infra red beam, mine seams to work like that.

port problem?
could anybody help? my xda2i never works with tomtom5...
how to switch the beam off pls??

switch off receiving beam????
under setting > connections > beam

O2 XDAIIi with tomtom 5.21 and BT GPS receiver
but there is still problem with the signals, it can display the right UTC time, and numbers of satellites, such as 29 on the North, but there all gray and said no valid GPS signal!
the com ports couldn't be changed which are com5 inboard, com6 outboard.
does anyone know what the proble is pls??
ps: I installed the BTHTools1100, but no change
see the attachment pic
many thanks

Hi Piers,
i've got exactly the same problem :-(.
With a GlobalStar BT348, the GPS signals are plainly perfect. But when i connect the official Tomtom wired receiver, i only get the grey bars, although, like you, the UTC and spinning wheel are there, indicating the GPS is detected.
I looked at the compatibility list on the Tomtom site, and besides Dell and iPaqs, there seems to be nothing compatible with the wired receiver.
Anybody has other information?

Hi again,
I think I found the solution
1. of course, "receive all incoming beams" has to be off
2. apparently, you can not have a paired BT GPS receiver (even inactive) when you want to use the wired Tomtom receiver... :shock:
I guess it has to do with the way WM2005 deals with GPS... :?:
So, in BT devices, delete the partnership with the BT receiver and everything works fine with the wired one. In TT5, simply declare the receiver as a wired Tomtom
I used it this morning, driving 100km, 90minutes, without a crash or anything

XDA2s - Tomtom 5 doesn't connect to BT GPS

I have a XDA 2s with Tomt Tom 5 on.
I have paired the Bluetooth gps receiver and although the GPS Viewer program picks up the gps signal on the pda via the Bluetooth receiver, for some reason Tom Tom doesn't connect to The Bluetooth Receiver.
It was working and it's suddenly just gone off.
I have tried uninstalling and re-installing Tom Tom but no luck.
Can someone help me please.

Daft question, but have you disabled InfraRed Beam in connections?

No i haven't but i can sure try
and i'll try anything at the moment.

I've disconnected all beams but no luck, i've even tried doing a hard reset but that didn't work either.

problem with gps receiver

I connect my alpine to the gps receiver, but after few minutes, the conenction drops. I have not figured any problems with my bt hansfree.
Can anyone help??

turn off bluetooth

dropped connection
I have a similar problem . Alpine and BN806F , It pairs , wont talk then drops out ? I wonder if there is a time out after no activity ?
As my post says I am having a problem getting tom tom to see my gps reciever , do you have the some problem ? what am I doing wrong ?
Astro1

I downloaded a bt patch but the problem remains. I wonder whether it's a software or hardware problem..
Yes, I can't make my navigation program to see the gps receiver and after a while it gets disconnected...

To the OP - you said you cant get your navigation software 'see' the GPS - this is the root of the problem.
If your BT GPS unit doesnt see any requests to send data to the PDA, it will auto-switch off after a set period of time.
Once you can successfully configure your nav software to receive the GPS data, your bluetooth GPS unit will remain powered on.
You should have a software CD that came with the GPS unit (if not there are a number of freely downloadable GPS utilites for PDAs, some of which can scan for the unit to find it)- there's usually some very low-quality GPS checking utility that displays what satellites the unit can see, signal strength and so on: try using these programs to see if you can connect to your GPS, and if the unit than keeps the BT link open.
Maybe finding out which COM port the GPS unit appears on, will allow you to configure your nav software correctly to see the GPS.
Joe Pinball

I managed to connect it succesfully some times. Usually, it connects via bluetooth but it drops until I load navigator ( my navigation program). When I close the program, the bluetooth is off. I tried to search windows for power save settings but I didn't find something that would help.

GPS problems
Joe
Thanks for your advice I am still haviong big problems .
I have managed to get Tom tom to recognise a wired reciever ( but only once , and then when the cigarete lighter plug moved the unit powered down all was lost.
Do you know of any utilities that will show what is connected to what port as I believe this is the real problem . Aparently tom tom has a bad history of hijacking ports ?
It would be good to see what was actually going on .
Astro1

TMC for Athena

Hi there,
Has anyone made a TMC device working on the Athena?
I tried some version of the GNS FM9 adpaters but nothing worked.
Any ideas?
Thanks in advance for your help!
Have a good start into 2008.
greetz,
DAx

I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!

adamelphick said:
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
Click to expand...
Click to collapse
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas

AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
hmm... thank for the link. That would be really the last chance to get TMC working for the ameo.
FYI, I use Mobile Navigator 6 and it fixes the gps signal really quick. I also use the Quick GPS and when I start MN6 the GPS signal fixes within 1 minute.
Greetz,
DAx

AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino

gigino said:
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
Click to expand...
Click to collapse
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas

AndreasF said:
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
Click to expand...
Click to collapse
Hey Andreas,
sorry to trouble you again but we are using the igo plus and the same gps as you the GNS 5843 but we can get the gps to work but not the TMC everytime we try to connect the TMC the pda just frezzes like the port has a conflict.
We have only been trying this in landscape mode can you tell me in which mode you are using the igo Portrait or Landscape.
Please can you help me in get this to work because I really like the Igo plus more the any anothe navigators.
Thanks
Gigino

Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas

AndreasF said:
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
Click to expand...
Click to collapse
Hey Andreas,
thanks for your help I well try again over this weekend.
They is another problem that I have and I've tryed everything but cannot resolve it.
I use the Igo Plus in landscape mode when I'm using the map and I get a reminder or a call the screen revertes to portrait mode and after accept the call or dismissing the reminder all the buttons in the Igo software goes all funny.
Do you have the same problem or have you find a way to correct this problem.
Thanks
Gigino

Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!

adamelphick said:
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
Click to expand...
Click to collapse
Hi,
I can confirm this also, the screen is inverted meens, that it looks ok, but you you have to touch it in an inverted way. I.e. the button is on the left upper corner of the screen, but you to click in the right lower area. Thats really strange. I've have the feeling, that this happens very often, if you use the Map view instead of the cockpit view.
@ gigino: I use the ameo with a brodit mount without the keyboard, so I don't have this problem.
In my last message is a little mistake, you have to switch OFF (and not ON) the automatic access in the GPS settings.
Regards
Andreas

Bluetooth GPS setup for IG0 8

Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.

You have to make connection to your bluetooth GPS receiver, assign COM port and then in iGO select that COM port and speed. And it'll work ;-)

angus99 said:
Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.
Click to expand...
Click to collapse
check also settings/external GPS.