ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
when did you buy your wing???
and are you using flashcenter ?? so it can temporary cid unlock the device?
i got my wing in feb or march 08. yes i do have flash center, and i have used it w/o problems before. i have flashed from touch it to open touch and one of aserg's roms too. i have been using OT 4 lite black for weeks now. i have been watching the threads about the new OT 5. so i downloaded it and nothing new is flashing.
does this help any?
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
ttran i'm honored!
ttran001 said:
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
Click to expand...
Click to collapse
iwas hoping not to bother any of the main guys with this little problem, but i'm glas your here (love your OT's btw ). ok, i am using the standard activesync method.
heres what i do:
1. download new rom and put it inside my RUU folder on my computer's C drive.
2. run the herald-uspl.exe.
3. follow the prompts
thats all i do and it used to work. i don't know if this helps, but it's the only other thing i have been doing diff. on another thread i asked if it was ok to delete old roms out of my RUU folder. i actually removed my OT v4 lite black and then put the OT v5 UL and ran the uspl. do you think thats what it is? maybe you have to have your old version in the RUU before you flash to a new version?
hope this helps
No. You don't have to have anything but your newest ROM in the RUU folder. When flashing, the phone doesn't know or care what you currently have flashed, unless that ROM is causing problems with your active sync. If that's the case, place your phone into bootloader mode, install the stock ROM (unless you have a HardSPL phone, and it sounds like you don't since you're using USPL.) Then boot up the ROM and run the USPL.
ok, so now know what to do, but why did this happen? whats wrong with the herald-uspl?
i just checked my device info and it says im running open touch v3! i thought that i was using v4. i have hard-spl downloaded, but i dont know if i need to use it or not. should it? then try to flash?
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
shep211 said:
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
Click to expand...
Click to collapse
OK, i'll give it a try
Link to unlock phone software and howto
http://forum.xda-developers.com/showthread.php?t=358225
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
dougstoner said:
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
Click to expand...
Click to collapse
actually, here is exactly whats in the RUU.
i hope it helps
Ina Weetald
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
digitalknoll said:
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
Click to expand...
Click to collapse
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
it looks really sweet!!!!
dougstoner said:
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
Click to expand...
Click to collapse
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
digitalknoll said:
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
Click to expand...
Click to collapse
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
dougstoner said:
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
Click to expand...
Click to collapse
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
The HardSPL makes it so that if you flash a bad flash, you don't have to flash into the Stock RUU again just to get a working activesync connection to be able to flash again.
Courtesy of Ivanmmj
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
Hey, I was scared for a LONG time to do it...I read so much info before I finally decided to do it! It took me like 2 weeks of reading before I decided. It's an EXTREMELY simple process. Plus, it makes flashing easier. I was getting weird errors trying the USPL method sometimes. Anyway, just do this.
FIRST, make sure your IPL number is atleast 4.000 or higher. You can check this by holding the camera button down, and then doing a soft reset. HOld the camera button down till you enter the bootloader menu. (It's like 3 gradient colors).
If it's higher, great, you are ready to proceed.
Next, download this file.
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Unzip it, and it will contain 3 .cab files you need to install in a certain order.
1. Install canonyang.cab
2. Next, aserpolicy.cab
3. disablesecurity.cab.
Do a soft reset.
Put phone in flight mode!!!!
Now, go to the folder you just unzipped that file from. I think the default folder will be called hard-splwm6 or something like that. Go and run the RUU.exe file in it. Just follow the instructions. The screen of your phone will go white, but just wait, wait, and it will reboot itself.
Presto, you are hard spl, and can load whatever rom you wish!
Related
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Here's tmobile's ROM.
WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
ivanmmj said:
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Click to expand...
Click to collapse
papamopps said:
WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
Click to expand...
Click to collapse
I know it has been stated a million times. I'm just tired of the same question being asked over and over again and so here we are...
Too bad it'll be stated a million more times afterwards too.
falconeyez said:
Too bad it'll be stated a million more times afterwards too.
Click to expand...
Click to collapse
If we sticky it and threatened their lives if they don't read it... lol
ivanmmj said:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
Click to expand...
Click to collapse
It will not help!
ASerg said:
It will not help!
Click to expand...
Click to collapse
And we hold their pet's hostage?
ivanmmj said:
And we hold their pet's hostage?
Click to expand...
Click to collapse
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.
falconeyez said:
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.
Click to expand...
Click to collapse
Might work out, I get 10% of the over all sold
Ghostrider
Ghostrider said:
Might work out, I get 10% of the over all sold
Ghostrider
Click to expand...
Click to collapse
Fine, but I get 15% because it's my thread.
The instructions to do this are actually in my newbie thread. Which is a sticky.
TylerC161 said:
The instructions to do this are actually in my newbie thread. Which is a sticky.
Click to expand...
Click to collapse
I know, but most people don't search. I figured, maybe if it says "How to fix your bricked phone" on the title, they might get the idea.
It was actually done mostly as a joke...
help
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang
gumbico said:
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang
Click to expand...
Click to collapse
SPL 4.70.yang!!! your device is HARD-SPL!!
So going back to stockrom--> delete the SPL.nbh from EVERY RUU you are running.
Then it shouldn´t stop......
Big Thanks papa! That did the trick. My Wing is happy once again and running Open Touch. But I still want to give TouchIt another try.
And what if i cant find stock RUU mine came with some arabic keyboard and spl was 1.08 , thanks to Oli he didnt mention that SPL should be 4 or higher , so device is bricked since first Olis release and no way to find this arabic stock RUU.
Any Help ?????
Hitec
If the device had an spl of 1.08 prior to HardSPLing it, then you'll have to bring the device to your nearest repair center. There isn't a way around that. Oli doesn't know everything and that's the risk we take when we try new and experimental things that people create but have no way of testing. But, we live and learn. If it wasn't for that issue, you could always cook your own ROM and if the HardSPL was working, you could've easily flashed any ROM. But the keyboard wouldn't been wrong until you could find someone who had the correct keyboard and you extracted the ROM from it and cooked that keyboard driver into your ROM.
Oh noooo!!
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!
foo_bar_baz said:
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!
Click to expand...
Click to collapse
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.
ivanmmj said:
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.
Click to expand...
Click to collapse
Oh deary me! I am so dead now - I live in Tanzania, East-Africa. My "local" repair center is several hundred thousand miles away across The Big Blue. What exactly do the repair center folks do to fix the device? Perhaps I can soldier out myself with some guidance...
Thank you,
foo_bar_baz.
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Good manual! thanks!
ruebyi said:
Good manual! thanks!
Click to expand...
Click to collapse
no problem.. i had a friend in a dif thread needing help with hard spl and was looking for detail.. so here it is.. plus ill be as much support as i can be.
trust me if you follow those steps it will work and you will be on your way to great things
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
lmyers10 said:
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
Click to expand...
Click to collapse
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
iPhone iWing said:
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
Click to expand...
Click to collapse
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
lmyers10 said:
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
Click to expand...
Click to collapse
O no man i wasn't coming close to taking it like that.. It was a big reminder!! Thank you.. Like i said thou i didnt do them in order on my other wing and it worked without a prob.. But do as recommended now.. I put that they need to be in the order i have posted.. Thanks.. I hope your hard spl goes great!!!
fo_sho..
thanks these are great instruction.and i believe anybody should b able to hard spl afer reading these directions...but hey who knows
Thanks it worked perfect
Ditto here. Thank you very, very much. Good instructions!
One little thing: "aserpolicy.cab" is actually "ASerg Policies.CAB" and "disablesecurity.cab" is "Disable_Security.cab" in the OEM ROM you provided a link to.
I just got a used Wing off Ebay. My IPL is 4.10.0002 and my SPL is 4.10.0000 and when I try to HardSPL I get to where the progress bar is but then it says it can't communicate with my PDA/PHone and dies on me.
I installed the CAB files in the order stated then soft reset then ran the ROM UPdate Utility. ActiveSync is active but it says it can't communicate. Did I do something wrong?
Thanks for any help.
*** Edit*** Got this figured out. I needed to go to Settings->Connections->USB to PC and check the box for Advanced Communications then run the ROM Update Utility
Lance
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
chaotic646 said:
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
Click to expand...
Click to collapse
Maybe post how in case this happens to someone else?
iPhone iWing said:
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Click to expand...
Click to collapse
Awesome. I was worried about doing this because everything seemed out of date and etc on here but I figured the hell with it, it's been months and so many hours this week and it worked. Thanks. I was a little worried about the spl because it looked like an older version and said wm6 and not 6.1. Well everything worked out great, thanks for this. After hours and days of reading every thing I could, this was the only that did not leave me with too many unanswered questions making me worried about doing this.
*UPDATE* So I I did another one today (or tried) and kept getting that 260 error and don't know why yet (I know; it is some place in the forums) and after having it do it about 5 times I checked (unlike you said to) and it never updated the spl etc I was in a hurry but I don't think the error was my fault. But now I have a question: What exactly are the 3 cab files for? At first I thought that was what did the hard spl but then after doing it and reading this again (I learn by doing not reading) I realizied it is not. And second question is: Why does it have to be flashed with that ROM to hard spl it?
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
chaotic646 said:
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
Click to expand...
Click to collapse
Oh ok. I did 3 today and still did not see that (tg)
Hi!
Thanks for all the explanations.
My IPL is 4.18.0002 and SPL4.18.0000.
My phone is locked by a brazilian cell commpany TIM. Do I need to unlock my herald before to do a hard spl?
Thanks in advance
Gorbo
Hi Gordo, I am from Porto Alegre too and I hard-spled ok here.
You dont need to unlock before to do a hard spl.
Thanks.
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
I have done the same yesterday ... the thing was I've forgot the storage card in the phone. There was mess of previous installation (mostly WM5). Today I've made clear installation of the official WM6 with the card out of slot. It is working perfect now.
Hi,
I was really hoping to do this without having to ask for guidance!!
I have backed up my ROM via Kovskykitchen: all OK and nice clear tutorial! thx..
I have X1_HardSPL_V1 ready to run..
I have the Touch-IT Experience ROM..
I think I follow the process but have a question about HARDSPL : Once I have completed the process - will I be able to use the phone at that point - or will I have to flash a new ROM to use it? i.e. is HARDSPL just an unlock so to speak or does it wipe the phone?- been reading this very helpful thread http://forum.xda-developers.com/showthread.php?t=446070 by Phenx - ta..
Flashing the new rom:
all the detailed tutorials seem to be the MicroSD method.. I can't find a decent X1 walkthrough using activesync...
Can anyone point me in the right direction? I'm obviously searching wrong..
Thanks!!
(One other question: will flashing affect my sim contacts? Thanks)
I'll try and answer ur questions to the best of my ability but i can't say i know much about what hardspl is besides the ultimate tool
After you hardspl u will be able to use ur phone as normal. I believe it still has the same stock rom on it but again i'm not sure but i do know u will be able to use it.
There is a way to use activesync and its fairly simple. Establish a connection through activesync and then run the rom update utility and follow the instructions. This is the only method i've ever used and i've been flashing my phone since the wizard.
Hope this helps
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
I would suggest backing up your contacts to your sim card, pull your memory card and then flash AFTER you hrdspl the phone. The hrdspl enabled you to be able to flash the phone to another rom, it will not interfere with the operation of the phone afterwards.
WC
x1tom said:
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
Click to expand...
Click to collapse
Most ROM's are packed together with the flash prog. I do recommend the microSD method, as it's less prone to murphy's law.
always use the sd way, it far by the safest.
your sim contact will be left on the sim the other contacts yo want to backup.
hardspl is a unlock only utility, wont affect your phone, rom.
ive done it throught the sd way ...and its really simple and no problems, i had a few problems with hardspl ...but got that sorted quick enough.
yeah so i'd recommend the sd way.
Well don't have a microSD so did it via activesync...
HARDSPL - was painless - click - click, go make coffee - done!
I mistook the ROM update in the Touch zip for another HARDSPL.. It was infact (obviously) the update util needed.. Flashed to Touch-it .21 - As easy as HARDSPL....
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
x1tom said:
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
Click to expand...
Click to collapse
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
well thats the icing on the cake!! cheers - worked a treat.. thanks all
fards said:
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
Click to expand...
Click to collapse
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Angelusz said:
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Click to expand...
Click to collapse
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
smaberg said:
always use the sd way, it far by the safest.
...
Click to expand...
Click to collapse
flashed my phone like 10 times now and NEVER used the SD version.
so from my point of view ... usw the USB version. saves loads of time.
plugin USB
sync if not allready done
start update and click a few times
done
download file on x1, save to sdcard,,,,, rename flash, much easier doesnt require windows pc can be done anywhere and less chance of failure
must have flashed different devices well over 100 times
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
narutoramen said:
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
Click to expand...
Click to collapse
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Ooops! Misspost.
fards said:
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
Click to expand...
Click to collapse
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Angelusz said:
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Click to expand...
Click to collapse
mm what theme are you running?
Mine is pure black.. or do you mean the battery strip right along the top?
rotsu said:
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Click to expand...
Click to collapse
you dont need to falsh HardSPL again.
DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave
Hi everyone,
Since yesterday, i learned how to flash spl, and download roms and run them through RUU. I was unsucessful at first because of my firewall being on, and was able to flash roms without a problem after turning it off.
I wake u this morning, and tried flashing a new rom and I end up getting error [204] again. I checked everything from firewall, antivirus to even moving the .nbh folder to system 32, and still no luck. I wanted to reflash the phone back to the original TMOBILE rom, but it wont flash. HELP!
Iv been on since 11am this morning trying to research what im doing wrong, and rereading the "flashing roms for noobs" thread over and over.
Please, any help would be greatly appreciate and I will send money through paypal if you can help, this is driving me nuts!
andrewmandalay said:
Hi everyone,
Since yesterday, i learned how to flash spl, and download roms and run them through RUU. I was unsucessful at first because of my firewall being on, and was able to flash roms without a problem after turning it off.
I wake u this morning, and tried flashing a new rom and I end up getting error [204] again. I checked everything from firewall, antivirus to even moving the .nbh folder to system 32, and still no luck. I wanted to reflash the phone back to the original TMOBILE rom, but it wont flash. HELP!
Iv been on since 11am this morning trying to research what im doing wrong, and rereading the "flashing roms for noobs" thread over and over.
Please, any help would be greatly appreciate and I will send money through paypal if you can help, this is driving me nuts!
Click to expand...
Click to collapse
Make sure that you don't have any special characters in your folder that's containing the customRUU file (?, %, $...).
Also, run the CustomRUU as an Administrator.
And then, if those don't work, IM me: AIM (ace10134) or Live Messenger ([email protected])
Ace to the rescue as always. Lol
HeavyComponent said:
Ace to the rescue as always. Lol
Click to expand...
Click to collapse
Ah, I thought I'd reply quick enough for it to go in the future, lol. But I'm still waiting to hear from this guy, I'm eager to hear if anything worked.
Sometimes something similar happened to me when battery way lower then 50%.
If this is not the case, try this -
rename the *.nbh file from the rom to RHODIMG.nbh.
Copy this file to your storage card, to the root.
turn off your phone.
press VOlume down (do not release it) and start the phone
FOllow onscreen instructions and flash the rom.
I guess it worke the guy does'nt even have the time to say thanks!! LOL.
ace10134 said:
Ah, I thought I'd reply quick enough for it to go in the future, lol. But I'm still waiting to hear from this guy, I'm eager to hear if anything worked.
Click to expand...
Click to collapse
I guess it worked the guy does'nt even have the time to say thanks!! LOL.
Please post in the Relevant thread instead of creating a new one, in this case the "for n00bs" thread.
Closed
Dave