Keybord when calling? - Tilt, TyTN II, MDA Vario III Themes and Apps

Is there a cab that includes the keybord (0 1 2 3 etc.) not ABCDEFG etc.) on the screen when calling.
If call a lot of numbers where you have to press a number to get to the wright department of a company.
Search did not help!
Thnx a lot!

I just press the left soft button on my Tilt when making a call... that switches it to keypad mode.

Related

Mute Button

Is it possible to program one of the hot keys to be a phone mute/unmute button, or is there a need to create an app?
I'll check out if I can make an app out of it tomorrow unless anyone posts anything different. I made a key lock app for the PTT soft button. I might make it mute your call if you're in a call or lock your phone if you're not. Anyway, lets hope it can be done without an app or with an app and you'll have it by tomorrow evening. Do you have the Tilt, Tytn, or Vario?
Thanks for your prompt response. I have an unlocked TYTN II.
You might not have a PushToTalk button. Got any of the other buttons in mind? You can map it to whatever, and I'll check it out tomorrow. See my first post titled "First Post / KeyLock" for my keylock app and a link on how to map the PTT button. Other buttons should be similarly mapped.
Would like to use the green phone button for this purpose.
I'm interested in this too (I swear I live on concalls for work right now). Either the green button or the ok button on the side of the phone. But I'm curious, will the phone have to be "on" (ie: not sleeping) for this to work? Currently I use the reTOUCHed dialer and just go to Call Status screen and tap the mute / unmute toggle on the screen to do this (which works well since they are bigger buttons than the default dialer on the Tilt). But having it mapped to a hardware button would be very nice.
Was there ever any progress on this? I'd like to assign the PTT button to mute/unmute during a call. I am constantly on conference calls and having to use the touchscreen to do this is ridiculous.

is dialing without touch screen possible?

Hi,
are there any applications or tweaks to make the phone screen buttons selectable with the hardware cursor buttons and the centre button to press them?
At the moment speed dial menu comes up which is ok but I would prefer to press phone and cursor around the screen selecting the numbers then press phone again to make the call.
I want to be able to dial a number without opening my hard case.
Thanks.
Ian
What about voice command? If you don't have all the buttons accessible in your case you can re-map one.
Phone manual dialing
anyone else had any joy on this?
I tried SPC phone suite and Shell both of which improve general one hand usability but not for dialing.
SPB Shell has a contact search screen with cursor key driven use of phone pad buttons but bot for the dialer of the phone - I asked them to look into it.
Voice command - any trial version available?
I love Voice Command, worthy the $. There is no need to train the app, it recognizes all of your contacts immediately.

MS Voice Command on Diamond

Ok, I must be having a brain fart today as I can't find the info I need after multiple searches. I have MSVC installed on my Diamond and it's the latest version (1.6.19214) that I'm aware of. It works perfectly so far and I can activate it with no issues using my Motorola T505 when connected with Bluetooth.
What I cannot do is activate MSVC directly on the phone. There are no buttons available to assign for it in the button settings. Does anyone have a simple and complete set of instructions of how to assign a button of some sort on the Diamond to activate MSVC? Much appreciated and thanks!
James
Go to
settings - Buttons - Button 1 Hold can be reassigned if its the same as the touch pro.
That's the issue I'm having, there is nothing listed in the buttons settings to assign or to re-asign. The window is blank and I can't see any way to add a button into the window to assign. Any thoughts? Thanks!
James
Hi ,
My solution was to re-assing the "Phone" screen buton on TF3D to Voice command :
From Diamnod Tweaks list :
31. Remap Manila softkeys:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Thanks, I'll have a look at that one. I thought there was a way though to remap a "long press" on the talk button or some such to activate voice command? Cheers!
James
joudbren,
interesting, I am just about the ask the same question as I just got my motorola t505 yesterday.
My other question is, when I first pair with motorola t505, I could get voice confirmation , then I say yes to make the call. Now I don't get voice confirmation at all, if I yes, it will make the call, if I say no it will not make the call.
I am wondering how can I get the voice confirmation back
Did you ever find a way to do this? I have MSVC running as a program but cannot assign it to a key.
momyc said:
Hi ,
My solution was to re-assing the "Phone" screen buton on TF3D to Voice command :
From Diamnod Tweaks list :
31. Remap Manila softkeys:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Click to expand...
Click to collapse
Apart the solution above , I use Gscroll by tapping twice on the center wheel. It's working on 90% of the time.

remap software button

Hi,
I would like to remap my right software button to open the Call History of the Diamond (the one with the four big buttons underneath the calls)
I have disabled the TouchFlo3D and I use PocketBreeze instead. What I miss from TF3D is the Call History applet, but I can't get it to open instantly when I need it.
any advice would be appreciated!
Chris

[RESOLVED] In-Call Status/Keypad Screen Goes Blank

Hi All,
When dialling a call, the HTC turns off the screen 5 seconds after the call is connected forcing me to have to press the Power button in order to display the 'In Call Status' window so that I can select the Keypad button to enter the voice mail access code. Additionally, listening to Voice Mail messages and pressing keys is extremely difficult as when I move the phone to my ear to listen to the Voice Mail, the screen blanks out and I must press the Power again to get the Keypad.
Ideally, I would like the screen to remain on between 30-60 seconds so as to allow interaction with the keypad ... such as in Voice Mail.
I've looked at several threads here and on other sites recommending changes to the RIL, Phone, and BackLight registry keys and I have tried some utilities such as 'AdvanceConfig 3.3', 'Kiaser Tweaks 0.41', and 'Diamond Tweak 0.5.3' to name but a few... no luck! At one time, it seemed like I was on the right track with the registry changes ... but the changes actually reduce the delay time to 1 second.
To rule out the possibility of a bad phone, I tested my wife's touch as well ... same result - purchased to identical units; makes it easier to support.
I would greatly appreciate any insight from seasoned experts.
Advance thanks,
Reference URL
http://forum.xda-developers.com/showthread.php?t=413798
-------------
ROM Version: 1.90.707.1 WWE
ROM Date : 08/01/08
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U
hilaireg said:
Hi All,
When dialling a call, the HTC turns off the screen 5 seconds after the call is connected forcing me to have to press the Power button in order to display the 'In Call Status' window so that I can select the Keypad button to enter the voice mail access code. Additionally, listening to Voice Mail messages and pressing keys is extremely difficult as when I move the phone to my ear to listen to the Voice Mail, the screen blanks out and I must press the Power again to get the Keypad.
Ideally, I would like the screen to remain on between 30-60 seconds so as to allow interaction with the keypad ... such as in Voice Mail.
I've looked at several threads here and on other sites recommending changes to the RIL, Phone, and BackLight registry keys and I have tried some utilities such as 'AdvanceConfig 3.3', 'Kiaser Tweaks 0.41', and 'Diamond Tweak 0.5.3' to name but a few... no luck! At one time, it seemed like I was on the right track with the registry changes ... but the changes actually reduce the delay time to 1 second.
To rule out the possibility of a bad phone, I tested my wife's touch as well ... same result - purchased to identical units; makes it easier to support.
I would greatly appreciate any insight from seasoned experts.
Advance thanks,
Reference URL
http://forum.xda-developers.com/showthread.php?t=413798
-------------
ROM Version: 1.90.707.1 WWE
ROM Date : 08/01/08
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U
Click to expand...
Click to collapse
when you use the registry tweaks you usually need to do a soft reset, and then the changes take place on bootup.
Hi mikemorris,
Agreed, I've even gone as far as shutting down - Long Power Press. I also have made the registry changes one at a time and captured the before/after settings.
Cheers,
Backlight timeout on calls fuze
I have also tried all the registry tweaks to extend the backlight on calls to something over 5 seconds.....
All my registry changes "TAKE" OK as seen after checking...
The performance changes work great...but not this backlight on calls...
Any fix yet??
Ron De Silva
Try this thread
http://forum.xda-developers.com/showthread.php?t=488991

Categories

Resources