I believe at one point I could assign MS Voice Command to an icon and add the icon the programs list, it now only appears under buttons and I have to use my only available hard button to get it to launch. Why cant they make that big middle button a press and hold option as well?
Any ideas?
TIA
-mix
Voice Command on Diamont
Have you tried using AEBUTTON PLUS? You can assign the center button to anything. I havent installed Voice Command yet but I do have Aebutton plus working on the center button to launch PI Informant Calendar. It should work with voice command also.
Press and hold the "green" call key.. While on the hope screen.. You'll get the voice command running
That's interesting, I couldn't get it to install properly. Can only see it in settings and not in programs.
i just figured out how to get it to work....
vc1.6 i installed it 5 times and did not work after i assigned my only f))king button it just one beep not like used to 3 beeps so i create a icon in programs dir and then link button to that it works perfect.
Hi, does anyone know how to remap soft keys on home screen? Default is Phone and Programs, I want to change one of them to run phoneweaver menu. Any idea how to do that?
Regards,
Lucas
use an regeditor or TC and go to registry,
then goto HKLM/Software/HTC/Manila
there you find this
HomeLSKArguments
HomeLSKPath -> Left Home Key
HomeLSkText
HomeRSKArguments
HomeRSKPath -> Right Home key
HomeRSKText
Path = Program to run
Text= Label on Home Screen
Ghostrider
It works. Thanks for that
Hi
Very usefull tip, is it possible to do the same thing with the other shortcut in manila
For example change "All people" in the people Page ?
Ghostrider said:
use an regeditor or TC and go to registry,
then goto HKLM/Software/HTC/Manila
there you find this
HomeLSKArguments
HomeLSKPath -> Left Home Key
HomeLSkText
HomeRSKArguments
HomeRSKPath -> Right Home key
HomeRSKText
Path = Program to run
Text= Label on Home Screen
Ghostrider
Click to expand...
Click to collapse
can you please give example how to write it?
if i want left key to be "resco explorer".
ishaked said:
can you please give example how to write it?
if i want left key to be "resco explorer".
Click to expand...
Click to collapse
HomeLSKPath :
String = \Program Files\Resco Explorer\explorer.exe
HomeLSkText :
String = Resco Explorer
Soft reset or deactivate and reactivate TF3D into your today settings.
Hi,
I got away with changing the softkeys in TF3D but how to change the softkeys when you don't use TF3D (standard softkeys)
Thanks
Lambert
Fabliv said:
HomeLSKPath :
String = \Program Files\Resco Explorer\explorer.exe
HomeLSkText :
String = Resco Explorer
Soft reset or deactivate and reactivate TF3D into your today settings.
Click to expand...
Click to collapse
Hi
Can anybody post the path for displaying contacts? I have a german diamond and I tried following, which does not work: \Windows\poutlook.exe
Which path does work?
Hello Lambert,
HKCU>Software>Micosoft>Today>Keys>112 for the left key
HKCU>Software>Micosoft>Today>Keys>113 for th right key
If the 113 does'nt exist, you can create it.
Beware when you modifies the registry, you do it at your own risk.
Make a backup before each modification.
You can try also "Remap Softkeys", is a freeware that will make it for you.
Put this soft where you want, "My documents" for exemple and execute it.
MaverickCH said:
Hi
Can anybody post the path for displaying contacts? I have a german diamond and I tried following, which does not work: \Windows\poutlook.exe
Which path does work?
Click to expand...
Click to collapse
Try this path : \Windows\Start Menu\Contacts.lnk
LamPET said:
Hi,
I got away with changing the softkeys in TF3D but how to change the softkeys when you don't use TF3D (standard softkeys)
Thanks
Lambert
Click to expand...
Click to collapse
for the Standart keys on startscreen you can use AdvancdConfig too
Ghostrider said:
for the Standart keys on startscreen you can use AdvancdConfig too
Click to expand...
Click to collapse
Exactly
Fabliv said:
Try this path : \Windows\Start Menu\Contacts.lnk
Click to expand...
Click to collapse
thank you. it works
another question. is it possible to allocate the function "keypad lock" to a soft key? path?
MaverickCH said:
thank you. it works
another question. is it possible to allocate the function "keypad lock" to a soft key? path?
Click to expand...
Click to collapse
You welcome !
Why do you want to allocate this keypad lock function to a soft key ?
You can lock your device by pressing and holding the "End Call" button or give it some more option ...
Fabliv said:
You welcome !
Why do you want to allocate this keypad lock function to a soft key ?
You can lock your device by pressing and holding the "End Call" button or give it some more option ...
Click to expand...
Click to collapse
yes I know. but it takes too long to press the "End Call" button.
I mean its not really a problem. But it would be nice to lock the device with one touch
MaverickCH said:
yes I know. but it takes too long to press the "End Call" button.
I mean its not really a problem. But it would be nice to lock the device with one touch
Click to expand...
Click to collapse
Ok, you can use and configure S2U2 to lock your device when you press the start button or if you put the device face down with GSen.
This app (S2U2) can give you more services that you need, but don't use the S2U2 CallerID cause it could be in conflict with the HTC CallerID.
Search for S2U2 Thread on xda-dev and GSen in this forum.
Have a look at this topic to : http://forum.xda-developers.com/showthread.php?t=305402
Hi,
I am trying to remap the right softkey to open the programs part of the start menu. for some reason, whatever I try, I can not get it to map to here. It tends to either error and say that it is digitally unsigned, or it opens explorer, not in the programs folder. Bit odd really. Any suggestions?
Hi, I need to map a WiFi ON/OFF toggle on the Manila Right Soft key on homescreen, cause its taking to much time going to conn.mgr. every time... is it posible ?
thx for any advice
Well I think lots of us were searching for a "videocall" fix...
In the new rom 1.93.707.1, "contacts" soft key was replaced with "video call".
Can this be fixed via registry change and revert the softkey from "videocall" to "contacts"?
How do i set the right key back to what it was?
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
nubbin said:
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
Click to expand...
Click to collapse
try this
In a registry editor, go to:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Thanks very much - worked a treat!
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
itsallsubliminal said:
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
Click to expand...
Click to collapse
i second that!!!
default contact is hard to use and scrolling is suck!
Try this link, it has more info about remapping soft keys in Manilla (TF3D) and also (TF2D)
http://forum.xda-developers.com/showpost.php?p=3292483&postcount=2
or the whole thread which has other good info.
http://forum.xda-developers.com/showthread.php?t=480475
Hope this works for you!
so this is for the right soft key:
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
what do i put in the open "open" part so i can have my contacts open? and for the text to i just set it as "Contacts"?
Click to expand...
Click to collapse
its Windows/AppButtons/Contacts.lnk
I can't get it to work
Okay ... I've read all the post that I could find about changing the softkeys and nothing seems to work. I've changed the registry settings as indicated but still no go. I have the TMO TP2. I only want to change the home page so don't need anything fancy. Been updating the registry settings (HomeLSKText, HomeLSKpath, HomeLSKArguments) and can't get it to actually do anything (the text changes). What I want todo is to jump to the Contacts HTC page (really anything other than the Camera - why TMO did you make it Camera?). Any help would be great. Thanks.
Hello eveyone,
I´d like to know if there´s a way to change the two buttons beneath the horizontal touchflo3d scroll bar.
I use the bElite99b ROM version and there it says on the left "Telefon" and on the right "Programme".
I´d like to change the "Telefon" button to a calendar button. So that it reads "Calendar" and when I press it, the calendar opens up.
If it is not possible to change it through an already written program: does anyone know if there is a registry key for this button?
Thanks in advance for any answer.
bye,
Thilo
solution found
ok, I found the solution myself while reading other threads.
Here it is:
change the registry key values:
'\HKLM\Software\HTC\Manila\HomeLSKText' to e.g. "Kalender" and
'\HKLM\Software\HTC\Manila\HomeLSKPath' to e.g. "Windows\Startmenü\Kalender.lnk"
bye,
Thilo
Hi,
I would like to remap my right software button to open the Call History of the Diamond (the one with the four big buttons underneath the calls)
I have disabled the TouchFlo3D and I use PocketBreeze instead. What I miss from TF3D is the Call History applet, but I can't get it to open instantly when I need it.
any advice would be appreciated!
Chris