Any one have Voice Command working (soft key?) - Touch Diamond, MDA Compact IV General

I believe at one point I could assign MS Voice Command to an icon and add the icon the programs list, it now only appears under buttons and I have to use my only available hard button to get it to launch. Why cant they make that big middle button a press and hold option as well?
Any ideas?
TIA
-mix

Voice Command on Diamont
Have you tried using AEBUTTON PLUS? You can assign the center button to anything. I havent installed Voice Command yet but I do have Aebutton plus working on the center button to launch PI Informant Calendar. It should work with voice command also.

Press and hold the "green" call key.. While on the hope screen.. You'll get the voice command running

That's interesting, I couldn't get it to install properly. Can only see it in settings and not in programs.

i just figured out how to get it to work....
vc1.6 i installed it 5 times and did not work after i assigned my only f))king button it just one beep not like used to 3 beeps so i create a icon in programs dir and then link button to that it works perfect.

Related

Changing Inbox<->Sent<->Del.Items w/o stylus

I am looking for a solution to change between Inbox/Sent/Deleted/Outbox/Drafts in messaging accounts (SMS, POP3,MMS) without using a sytlus.
Changing accounts is OK! with messaging button ot Dpad buttons and I can easily close with smartskey or just by pressing red button but I couldn't find a way to change folders in accounts by using buttons.
Especially when I am driving so hard to tap with my finger because the account comes up where you left it (it's normal but still if you can't use stylus it's a headache). :roll:
This is not exactly a short cut but it works for me
In the mail/SMS/mms etc Account
Press the Right Softkey
Press Dpad Up twice
Press Dpad Right
Press Dpad Center
I remember it as: Menu Up Up Right Enter
Then you can move around your folders
Once you get used to the key combo its quite quick to do
Hope this helps
Jules
Yes of course it's
Menu\Go To\Folders
I looked for an one time pres thing. Thanx anyway. Maybe if it's possible to make that function map to a button it'll be solved
:roll:
you can map it to a key using vito button mapper since they got macro. but i stopped using vito ever since aebutton plus came out. however that shortcut key menu up up right center is quite useful. easy to remember. actually its menu up up center center would work too. easier to remember it as MUUCC. hahaha.
thnx
will try :wink:

Howto Call Up Volume Settings with Button

Hello,
I'd appreciate to assign the 'volume' window to a hardware button - let's say the Button 6 (Voice Dial, which i never use).
The volume window is the one, you normally get then tapping on the volume icon on top of the screen.
This window should open/close by pressing the hardware button. Once it is open, I can set the actual volume with the Jog Wheel.
Any help is appreciated!
Chris
You can try something: install Wisbar Advance 3 just for trial. i know that you can show that "volume bubble" by pressing buttons on the taskbar, and i know it offers some links in the programs folder for utilities, like switch task etc., but i'm not sure if it brings a new link for that volume bubble (i unfortunately uninstalled WA3 yesterday so i cannot test - maybe someone who has it installed can verify the links so you don't have to install it...)
With Wisbar Advance 3 it works
Chris
hmmm, can you post the content of the link that does that ? or the .lnk file ? so others can do this without WA3...
Another suggestion: AEButton plus

I need someone to develop a program for the Kaiser

Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
aminhafez said:
Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
Click to expand...
Click to collapse
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
tomasz said:
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
Click to expand...
Click to collapse
Ok so how can I assign the mute/unmute to a hardware button as I can't find it in the settings--->buttons' drop down menu?
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
And if "hold" is a suitable alternative to mute, you don't have to do anything... pressing in the volume button toggles the call on/off hold. At least on my Tilt.
tomasz said:
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
AE Button worked well. Now I can mute/unmute at a touch of a button. I haven't tried its full potential yet.
Thanks for the great tip.
Still though I wouldn't mind a power feature like the Treo. I do not like that itty bitty recessed power botton on the right...
On a side note I'm going to try and see if there is a reg key on the Treo I can copy to the Kaiser where when you are in PIE and hold the action button it pops up the IE menu. That's nice. Not sure why its only on the Treo. I guess for it's one handed nature... What, I don't get to use my Kaiser with a one handed nature in mind?...
juiceppc said:
you are in PIE and hold the action button it pops up the IE menu.
Click to expand...
Click to collapse
Hmmm, that might be a useful map for AE button... for the side "ok" button, map a double-click to the left softkey, and press/hold to the right one (and single-click stock OK). Between that and the scroll wheel, that should make for some pretty easy one handed operation.
Just tested it.. works well, though the side OK button is a bit stiff/recessed to easily double-click with a thumb. May take some getting used to.
Hey guys,
I think i have found what your looking for. I also needed to toggle my Flight mode by a button because since most ROM versions of WM5 and WM6 Flight mode can`t be switched by tapping the signal meter at the top of the screen.
I installed this app and linked it to Button 6/Recording (Press & Hold) and now it switches Flight Mode On and Off. This is what i needed.
Look here: http://toosten.de/index.php?seite=sw&id=7
Have fun with it
One thing for now i noticed. When activating Flight Mode, it just turns off the Phone Signal and not BT when enabled. I am contacting the author of teh tool to see if some options can be added.

when i press

the phone button on my s9's using the tilt, it launches the phone keypad. on my 8525, it luanches voice command which is what i want. i have it installed on both devices with the same settings. how can i fix this?
or rather, is it possible to remap the button?

Button on the headphone's, can it be remapped?

Hello People,
I've looked around and can only find details for remapping the PTT button, which has no affect on the button on the headphones.
If you double press the button it calls the last number you dialed, If you press and hold it, it opens voice commander (if installed) But ive installed Microsoft Voice Command and now the function has stopped working all together, do any of you know how to manipulate this button in the registry?
Thanks in advance.

Categories

Resources