Database Develop

Goodlink

I am using goodlink on my TILT and when i go to send an sms it doesnt pull my goodlink contacts only my sim contacts.. any clue how to access goodlink contacts for sms?

The Windows Mobile OS will only pull up the native contact list. If you are using ver 5 of GoodLink you can get the GoodLink server IT admin guys to be sure that the one way (that is from GoodLink to your native contacts) is enabled on your phone.
According to GoodLink literature the reason for this functionality is just for this reason and for things like Voice Command (or other voice dialers) that also use the native contact list. In this case the OS uses the native contact list for SMS msgs

jmr79x said:
I am using goodlink on my TILT and when i go to send an sms it doesnt pull my goodlink contacts only my sim contacts.. any clue how to access goodlink contacts for sms?
Click to expand...
Click to collapse
Quick question .. how did you get goodlink on your tilt...my restore from backup method did not seem to work. Did you do an OTA install?
EDIT: See my solution posted below

What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?

jcrompton said:
What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?
Click to expand...
Click to collapse
Just figured it out ... problem was I had goodlink on my 8525 too (which as of about 20 mins ago, when the fedex guy got here, is being retired), and I could only have it on one device at a time. Once I figured that out, just got a new PIN for the Tilt and it seems to be running the OTA provisioning without a problem.

jcrompton said:
What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?
Click to expand...
Click to collapse
Mine pushed out 4.9.3.21 and it's working just fine...

I got our admin guys to upgrade to 5.0 then upgraded (it automatically loaded it). It looks a little different to 4.93. its not that much of a big deal except you get a nice RSS and the ability to make a calendar appointment private (finally). BUT admin gets to see all the apps you have on your Kaiser and they can lock anything out! you can also get your admin ppl to allow good contacts to be used for native lookup (phone, sms etc.) but it didnt seem to function as well as activesyncing contacts (it doesnt show company name - in fact it doesnt sync company name and you end up with lots of UNNAMED contacts).
I also had a couple of issues on the install becuase Activesync forces you to add a password and Good doesnt like this when it installs. tyherefore in the end i did it via ahard reset.
All in all, its a luittle better. im testing it for stability before they roll it out to thers where I work.

Please report back on the experience - It would be great to know how things work before I try an push for the upgrade as well.
How well does that RSS work, and is it only set up on the phone, or does it sync with your Outlook acct? (ie - is it a box in your exchange account like the native rss support in Outlook 2007)

Good vs. BBC
I have used goodlink for years starting on my treo 650 then my trusty (kind of) 8525. The whole separate contacts thing really annoyed me so when I got my tilt I switched to, dare I say, blackberry connect. As opposed to using separate software to manage the calendar and contacts, it uses the built in wm apps so the contacts issue goes away. Just something to think about if you have the option to use either one...

Here is how to get rid of outlook e-mail from messages!

As I have been sifting through the forum I have come across several threads about people wanting to know how to get rid of outlook e-mail from messages.
The e-mail I have set up on my kaiser is the same as my outlook on my pc, so when I sync I get duplicate e-mails and have to disable the option to sync mail with pc, but this still leaves the outlook account in messages.
Well here's how to get rid of it.
First you will need a registry editor, I recommend Resco Registry editor but others will work fine.
Then you will need to make a backup of the registry key we are going to delete. So open up your registry editor and go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc
Now in here you will find several folders(so to speak). These include Activesync, imap4, pop3, MMS1 and SMS.
Go into Activesync and their should be a key called "Friendly Name" this should say something like "Outlook" go back to HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc then select the "Activesync" folder and use menu to export the folder as a .reg file (backup file) then select the "Activesync" folder again, but this time delete it.
Now close your reg editor and go into messages and the Outlook title should be replaced with the title Activesync. Just soft-reset your device and the Outlook mailbox including "Activesync" has now disappeared leaving just the e-mail accounts and other message accounts that you use whilst mobile.
Should you wish to restore this option just inport the .reg file you created into the registry and soft-reset and it'll be back.
Well I hope this helps. And quick thanks to all members of this forum for your continued support to the community and even helping the little guys.
diigibio (diigimatrix)

worked on my Tilt
Thanks! Great solution!
EDIT: Wiped out my outgoing MMS. Dropped registry backup back in and both MMS and Outlook Mail were back.

diigibio said:
The e-mail I have set up on my kaiser is the same as my outlook on my pc, so when I sync I get duplicate e-mails and have to disable the option to sync mail with pc, but this still leaves the outlook account in messages.
Click to expand...
Click to collapse
Why do you have duplicate emails? With an exchange server, your emails on device and in your pc's outlook will replicate - and without exchange they sync anyway?

What's the settings for MMS1? I don't have that in my registry.

dis39tif said:
What's the settings for MMS1? I don't have that in my registry.
Click to expand...
Click to collapse
Each of these folders represent an account within messages. So "Activesync" is "outlook" (used and updated when syncing with a pc version of outlook or using an exchange server), IMAP4 Corresponds to my (@btinternet.com/using imap), SMS is for SMS (go figure/lol), MMS1 (this can also just be MMS on some device/dependant on version of Arcsoft) POP is for my (@3mail) account and Hotmail is for hotmail (in juction with using Windows live).
So by deleting the "activesync" folder you are in effect deleting the information to display the account.
Also I deleted the imap4 folder (after making a backup of course of the reg entry) And soft-reset the device. It removed my @btinternet account with e-mails. But after i imported the .reg backup I made and soft-reset the device again the account returned with all e-mails intact and fully readable.
**Possibility for a freeware app to hide accounts that are private??? using a password to auto add/remore .reg to access accounts or maybe not. **
Thanks trying to bring something to those who have helped me... Thanks
diigibio (diigimatrix)

unwired4 said:
Why do you have duplicate emails? With an exchange server, your emails on device and in your pc's outlook will replicate - and without exchange they sync anyway?
Click to expand...
Click to collapse
Hi unwired, The reason I get duplicates is because I don't actually use an exchange server. I have my @btinternet.com account set up on both my home Supreme Pc, My laptop and my Kaiser. But when I used to cradle my kaiser with my pc (mainly for appointments) to update it used to download my e-mails from outlook on my pc to my kaiser. So in the outlook account on my kaiser would be all the e-mails from my pc version of outlook, then in my @btinternet.com account were the same e-mails that I collected whilst I was mobile.
So I needed access to my @btinternet account whilst mobile but in the outlook folder that wqould not let me sync so then i had to set up the other.
So i stopped it syncing with outlook messages on the pc and then decided to try and get rid of the outlook account, which is what i then proceeded to do!
Ok i am going to stop now before i start going round in circles..
But thanks for the question..
diigibio (diigimatrix)

thanks diigibio!
I was looking for some time to solve this. now my kaiser is even more what I want it to be.
kudos to You mate!
br
bro

bronx said:
thanks diigibio!
I was looking for some time to solve this. now my kaiser is even more what I want it to be.
Click to expand...
Click to collapse
Your welcome mate. To be honest I think it was your comment about it I came accross the other day on the forum, which is one of the reasons I decided to post it. I'll try and help more if I can. I've just setup talking dial tones. so when I dial a number it says the number rather than beep. Thanks to grumps for the tones!! I think he's compiling an app to do this easier. But i couldn't wait and so set it up via the registry...
Oh www.htcclassaction.org reports we could have proper display drivers by the end of march!! So fingers crossed our Kaiser will fullfil their legacy!!

diigibio said:
Hi unwired, The reason I get duplicates is because I don't actually use an exchange server. I have my @btinternet.com account set up on both my home Supreme Pc, My laptop and my Kaiser. But when I used to cradle my kaiser with my pc (mainly for appointments) to update it used to download my e-mails from outlook on my pc to my kaiser. So in the outlook account on my kaiser would be all the e-mails from my pc version of outlook, then in my @btinternet.com account were the same e-mails that I collected whilst I was mobile.
Click to expand...
Click to collapse
Cool. Thanks for explaining.

Thanks Diigibio.
I don't have that registry file (obviously). I have the Shogun's Palm SMS threading program installed and lost my MMS'. The fix to install the Arcsoft composer and run an enablemms.cab never worked for me. I wonder if this is what it's trying to fix.

dis39tif said:
Thanks Diigibio.
I don't have that registry file (obviously). I have the Shogun's Palm SMS threading program installed and lost my MMS'. The fix to install the Arcsoft composer and run an enablemms.cab never worked for me. I wonder if this is what it's trying to fix.
Click to expand...
Click to collapse
Yeah, sounds like it. If you post that .cab here. I'll take a look for you mate and see what I can come up with over the next week. Failing that I can take my .reg setting for the mms and possibly create a link to the default messaging app.
However my best mate has an o2 xda orbit and I installed WM6 on it but there is no 6.1 yet and he wanted threaded sms. So i installed Shogun's Palm sms. Now when he opens that app he does not have mms, however when I linked to the default messaging app that still contained his mms account and all the mms I sent him were waiting there for him.
So try this out and if you need my help just ask. You can PM me for my e-mail address if you want to send the .cab direct or ask for any other help. I am at work tomorrow(or should I say today) and am on a sleep over so i will check my pm but it'll be from my Kaiser.
Hope I could help..
diigibio (diigimatrix)

dis39tif said:
Thanks Diigibio.
I don't have that registry file (obviously). I have the Shogun's Palm SMS threading program installed and lost my MMS'. The fix to install the Arcsoft composer and run an enablemms.cab never worked for me. I wonder if this is what it's trying to fix.
Click to expand...
Click to collapse
I have used a .cab analyser on the enablemms.cab and it contains no registry entries at all (none will be added or removed(except for unistall info and platform.reg which I believe is more to do with os at a guess))
and contains these files:
CeSetup.dll in the \Program Files\Tools Folder
checkfile.exe in the windows folder
Platformxxx.reg in the windows folder
CM_Entries.xml in the windows folder
And
Customize.lst in the \Program Files\Tools folder
Let me know how you get on..
diigibio (diigimatrix)

hi there again...
the trick works great, but I think, that I have a small problem in here.
after applying Your trick on my stock t-mob uk vario III everything went fine except loosing sound for new sms. even if I have ticked in my options to play sound and show message I can't hear or see any notification. only sign of new message is number of new messages in the middle of htc home plugin.
now.. I made a backup of that key before deletion, but...
I've deleted it.. '(-_-)
any chance for You to post that .reg file for me mate?? or if You have some other solution, then I would be more than happy to avoid hard reset.
br
bro

bronx said:
hi there again...
the trick works great, but I think, that I have a small problem in here.
after applying Your trick on my stock t-mob uk vario III everything went fine except loosing sound for new sms. even if I have ticked in my options to play sound and show message I can't hear or see any notification. only sign of new message is number of new messages in the middle of htc home plugin.
now.. I made a backup of that key before deletion, but...
I've deleted it.. '(-_-)
any chance for You to post that .reg file for me mate?? or if You have some other solution, then I would be more than happy to avoid hard reset.
br
bro
Click to expand...
Click to collapse
No worries mate, I still have sound on my sms notifications although I did have to deselect play sound in sound and notifications and reset then re-select the play sound option. And it worked for me but I have a stock htc tytn II. I am at work on my kaiser at the moment and the browser won't let me add an attachment, so when I get my laptop out at 6 i'll post the .reg entry. Fancy deleting it !! lol.. Check back around 6.30. It'll def be on tonight pal..
diigibio (diigimatrix)

cheers
I know I sound like a dumbo saying that it's deleted.. but ... oh well
thank You again
br
bro

.reg files
Sneeked on!
Here you go mate...

thanks
I tried soft resets just as You did - no luck for me unfortunatelly.
never mind, fix was sweet anyway. I'll try to play with it bit mo.
br
bro

Thanks for the update diigibio. I appreciate any help. How did you link your friend's phone to the default MMS messaging app? Or would it help if I tried to reapply registry settings?

dis39tif said:
Thanks for the update diigibio. I appreciate any help. How did you link your friend's phone to the default MMS messaging app? Or would it help if I tried to reapply registry settings?
Click to expand...
Click to collapse
The default messaging application remains untouched, especially when installing third party replacements such as SMS threading (IMSMS, Palm, Textr and so on). The default link goes to \Windows\tmail.exe.
The quickest way to do this is by using Resco File Manager. click on the tmail.exe and hold until (right-click) menu appears and click "send to" then choose "Start Menu as Shortcut".
Once this is done you can access it via the start menu or use the button app to map it to a button or use with a today screen plugin (spb etc) As when you install the third party app it either replaces the original shortcut with its own or alters the original link to point to the third party app.
Hope this is of some help...
diigibio (diigimatrix)

Thanks! worked great for me on WM 6.1 I didn't see the active sync option before the restart either.

Link mail screen to outlook mail

On the TF3D sceen, is there any way to link the mail button to the outlook mail instead of the "internet" mail?
Thanks

Err... If you set up your Outlook mail.. it would work.
If you set up your Outlook Mail and KEEP the Internet Mail (as well), then you will have both of them being accessed from the TF3D mail button (two envelopes on the right, instead of one)
If you set up your Outlook Mail and DELETE the Internet Mail, then you will have one envelope on the right .. and THAT will be the one for Outlook Mail.

To set up your Outlook mail, Tap on TF3D mail button
Then tap on Inbox
Then - Menu - Tools - Options
Now, tap on Outlook E-mail and enter the settings.

I actually tried to configure the Outlook Mail account (time pass) for gmail.
I couldn't get it to work.. (for some reason - sure I did something wrong).
Tried to sync Outlook Mail with my PC using Active Sync... some certificate validity issues came up..
Then, just decided to chuck it.
Had two envelopes appearing on the side.. just went ahead and cleared up everything from the registry - related to the mail set ups and set up my Gmail as the Internet Mail again.

I have set up my Outlook, and as you can see from screenshot, it's got mail in it, however, if I delete my POP3 email, the TF3D screen shows no accounts in the mail screen...

Anyone got any idead how to link the Outlook Inbox to the TF3D Mail screen??

Your email notification icon at the top looks quite suspicious... do you have another email client (such as BB Connect or Intellisync Mobile Suite) installed? I used Intellisync before and this is the icon I received and it also wasnt appearing in TF3D.
Let me know if you are using Intellisync- there is a work-around

mkhattab said:
Your email notification icon at the top looks quite suspicious... do you have another email client (such as BB Connect or Intellisync Mobile Suite) installed? I used Intellisync before and this is the icon I received and it also wasnt appearing in TF3D.
Let me know if you are using Intellisync- there is a work-around
Click to expand...
Click to collapse
Yes, I am using Intellisync Mobile Suite....

mcvpjd3 said:
Yes, I am using Intellisync Mobile Suite....
Click to expand...
Click to collapse
It's much better than Outlook Mobile isn't it? Nice to have REAL push mail
The reason TF3D isnt working is because it only recognises Outlook Mobile and not IMS and you do not have an Outlook account setup. The workaround (I'm hoping to find a better way) is to create an Outlook account through Activesync/Mobile Device Center on your PC. I've done some tests and there is no conflict between the two.
The downside is that there is no real integration between TF3D/Outlook and IMS so IMS is essentially working in Parallel. What I am trying to figure out is how to map TF3D to IMS so that when you click the envelope it takes you to IMS and not Outlook. At least with this workaround, you will get the best of both worlds with TF3D showing you your emails and IMS giving you the real push mail functionality which Outlook lacks.
Let me know if it works for you

mkhattab said:
It's much better than Outlook Mobile isn't it? Nice to have REAL push mail
The reason TF3D isnt working is because it only recognises Outlook Mobile and not IMS and you do not have an Outlook account setup. The workaround (I'm hoping to find a better way) is to create an Outlook account through Activesync/Mobile Device Center on your PC. I've done some tests and there is no conflict between the two.
The downside is that there is no real integration between TF3D/Outlook and IMS so IMS is essentially working in Parallel. What I am trying to figure out is how to map TF3D to IMS so that when you click the envelope it takes you to IMS and not Outlook. At least with this workaround, you will get the best of both worlds with TF3D showing you your emails and IMS giving you the real push mail functionality which Outlook lacks.
Let me know if it works for you
Click to expand...
Click to collapse
Excellent. I'm now showing the envelope in the Mail TF3D screen. I presume that with this workaround, all I will ever get is the "Click to view message" message, and not the first few lines of the message that you get with a POP3 account or a proper outlook account. (see attached)
From reading your message I am also guessing you are using version 8 or 9 of IMS. I currently look after 3 servers all using varieties of version 6. I have just created a new server with version 9 which installs the "intellisync" suite of application on the device. I've tried it on an XDA Exec, XDA Orbit (and some nokia and Sony Ericsson devices). I haven't tried it on the Diamond yet. How is it on that?

mcvpjd3 said:
From reading your message I am also guessing you are using version 8 or 9 of IMS. I currently look after 3 servers all using varieties of version 6. I have just created a new server with version 9 which installs the "intellisync" suite of application on the device. I've tried it on an XDA Exec, XDA Orbit (and some nokia and Sony Ericsson devices). I haven't tried it on the Diamond yet. How is it on that?
Click to expand...
Click to collapse
Correct.
I am using version 9 which works like a charm. I work for the local operator here in Dubai and am currently one of a few internal testers for IMS before we launch it as a service. I find it to be very functional and light on resources- highly highly recommended. Beats all competition including Blackberry (I've also set it up to get a personal POP3 account in much the same way as BB Internet does)
As for how much of the message appears in the TF3D, this depends on how much you tell Outlook to download of the message- all you need is a couple of KBs at the most to get the first few lines in the envelope.

Hey guys
I'm sorry but this will be probably an off-topic and stupid question but when you receive an email on your Diamond does it look like on your pc and can you view emails that have lots of graphics in them ??
I'm really sorry but this is my first WM device and i would like to know things like that

It depends on what kind of email account you are setting up on the device. If it's an Exchange account, the server has to be running Exchange 2007 for you to get HTML email on your device. Internet Email and IMAP display HTML without any problems.

well i've been using maill2web and it just emails didn't look like they should. Maybe you can tell me where can i find a good exchange server or something like that ??

gaabrysz said:
well i've been using maill2web and it just emails didn't look like they should. Maybe you can tell me where can i find a good exchange server or something like that ??
Click to expand...
Click to collapse
Well... there's many to choose from depending on your needs and budget (not sure of any free ones but you'll probably find some out there- although possibly not because Exchange is not cheap to install or maintain). Anyway a simple Google will give you many results http://www.google.ae/search?hl=en&q=hosted+exchange&meta=

Anyone found the solution yet ?
Noticed the solution to sync to a phony account - But I would really prefer to sort this via a registry tweak or similar.
I need to roll this out to a large number of corporate users, so the phony tweak is kind of hard to roll out compared to a registry modification.
Anyone?...
Its kind of frustrating to see the number of new emails in the notification area of TF3D but not actually being able to use the TF3D envelope function.
Regards
M

Hello,
I tried to find a solution, too. But up to now without success.
Does anyone know, where TF3D gets it's information from?
Best
mawim

no link to intellisync/outlook
mawim said:
Hello,
I tried to find a solution, too. But up to now without success.
Does anyone know, where TF3D gets it's information from?
Best
mawim
Click to expand...
Click to collapse
I also had an intense view at the registry, couldn't find any link to IMS/Outlook key...
I had a phonecall with nokias tac, telling me they will release a patch to solve this problem, not only to see unread mails at the TF3D - to have the original functionality of the tf3d mailicon workin. He could not tell me when the patch
will be released but it WILL come...
...but I'm very sure it could be solved with the correct Regkey...
regards, Marq

Marqus said:
I also had an intense view at the registry, couldn't find any link to IMS/Outlook key...
I had a phonecall with nokias tac, telling me they will release a patch to solve this problem, not only to see unread mails at the TF3D - to have the original functionality of the tf3d mailicon workin. He could not tell me when the patch
will be released but it WILL come...
...but I'm very sure it could be solved with the correct Regkey...
regards, Marq
Click to expand...
Click to collapse
Sorry to drag up an old thread - I'm currently using Intellisync and would also like to use TF3D to view my emails ...
Did any kind of patch or regedit get released or worked out?
Meanwhile, I'll try the work-around above in this thread if I can work out what to do exactly.
Regards,
Gary.

Any news on this ?
Any sight of that Intellisync patch ?

Free sync and backup pocket outlook to Google account

http://www.nuevasync.com I just set this up through the exchange server feature in activesync. It is an over the air sync to google calendar and contacts in gmail. (No pictures with the contacts in gmail ) I had a problem with duplicates at first, but I think that was because I was trying oggsync, goosync, and nuevasync at the same time. It appears to be working fine now. There are other options out there, but this one appears to be the easiest and free-est one out there without limitations. I hope you enjoy this as much as I am.
!Backup your stuff with PIM backup or something similar before you sync just in case!

very nice i will try it now
thanks chiles
with this we can now also change devices, roms, etc withoug worrying about PIM data loss
chiles said:
http://www.nuevasync.com I just set this up through the exchange server feature in activesync. It is an over the air sync to google calendar and contacts in gmail. (No pictures with the contacts in gmail ) I had a problem with duplicates at first, but I think that was because I was trying oggsync, goosync, and nuevasync at the same time. It appears to be working fine now. There are other options out there, but this one appears to be the easiest and free-est one out there without limitations. I hope you enjoy this as much as I am.
!Backup your stuff with PIM backup or something similar before you sync just in case!
Click to expand...
Click to collapse

Can you set categories in Google Calendar and it sync over? That's my biggest annoyance, I 'need' categories in order to have PhoneAlarm do specific actions for me based on the event category, such as "Work meeting" quietens everything, but there are some others that set the power on time different, or make the sounds louder, etc.. That all works with using Outlook to sync, but I haven't seen an online solution that works yet.

I haven't tried. I seem to remember that goosync would dumb down your category to the one default category. It might have been an old version or something. Good luck with it though! I just looked and I didn't see any category option on the google calendar webpage.

jahrami said:
very nice i will try it now
thanks chiles
with this we can now also change devices, roms, etc withoug worrying about PIM data loss
Click to expand...
Click to collapse
Well...My contacts lost their pictures on the gmail contacts page. This doesn't keep all of the information. I also lost my throttle contact category information. It's good for a sim card backup tho

I haven't used it myself yet. However, on quick inspection, the settings page recognizes multiple calendars, so it might sync in separate categories. There doesn't seem to be an option to only sync contacts with phone numbers, so I don't want to use it yet because gmail creates new contacts for those you email.

gave it a try and seems to work well! i only sync my calendar(s) and fits to it almost perfectly. the only problem is.. i'm having multiple calendars at my google calendar, and i cannot decide which calendars to sync. anyways that's better than goosync, only one calendar can be selected to sync.. otherwise have to upgrade to pro.. :E

Thanks for bringing this to my attention. I was using scheduleworld with the funambol client, but that stopped being able to connect. I would like to try to us nuevasync, but for as simple as the setup instructions are my activesync says that "Microsoft exchange did not accept my logon credentials". The server source is setup per the instruction on nuevasync site. I am running the stock ATT rom with WM6.0. I haven't knowingly changed any of my network settings and internet and email still work properly, but I can not get either funambol or nuevasync to work. Any thoughs would be appreciated.
Neal

[Q] Exchange active sync

Help Please
My contacts don't sync with exchange server 2007 sp1. Mail & Calendar work flawlessly. Don't want to use Touchdown.
I searched all over but didn't find a solution. Thanks

I don't have any issues. You could try deleting the account, clearing the data in the individual apps and then setting it up again.

bugsy said:
I don't have any issues. You could try deleting the account, clearing the data in the individual apps and then setting it up again.
Click to expand...
Click to collapse
Thanks. I tried that and it didn't work. Also reset the device and no luck. All my other devices work

they wont sync out all your contacts but when you type in the to field it will search for them.

wallyn said:
Help Please
My contacts don't sync with exchange server 2007 sp1. Mail & Calendar work flawlessly. Don't want to use Touchdown.
I searched all over but didn't find a solution. Thanks
Click to expand...
Click to collapse
I have a similar issue. Contacts will sync the first time, but never again after that. One trick I used to make it work was to initially set my sync at five minutes and to let it sit for an hour until it all synced (I have close to 2000 contacts). After it was done syncing I switched to push.
I switched to the kitkat email/exchange for a little while, it worked much better. I was having problems with unread counts so I changed back.

drunkfatjew said:
I have a similar issue. Contacts will sync the first time, but never again after that. One trick I used to make it work was to initially set my sync at five minutes and to let it sit for an hour until it all synced (I have close to 2000 contacts). After it was done syncing I switched to push.
I switched to the kitkat email/exchange for a little while, it worked much better. I was having problems with unread counts so I changed back.
Click to expand...
Click to collapse
I gave up and use Touchdown for the contacts and the native clients for mail & calendar. The only drawback is I have to enter a nes contact in the Touchdown app and the native app. I hope this will work in kitkat

wallyn said:
I gave up and use Touchdown for the contacts and the native clients for mail & calendar. The only drawback is I have to enter a nes contact in the Touchdown app and the native app. I hope this will work in kitkat
Click to expand...
Click to collapse
not sure this works, but are you sure that those contacts are selected to show up under your contacts? I'm sure they are but i thought i would throw it out there since someone said that it will search for them in the address bar but not show them up under contacts. Might jsut be a settings button for that.
On another note, i saw in another email thread that someone set their phone up with the certificates to ssl/tls (accept all certificates) instead of the stock ssl/tls setting. (not sure the ssl/tls is right but its some set of letters lol).

jayboyyyy said:
not sure this works, but are you sure that those contacts are selected to show up under your contacts? I'm sure they are but i thought i would throw it out there since someone said that it will search for them in the address bar but not show them up under contacts. Might jsut be a settings button for that.
On another note, i saw in another email thread that someone set their phone up with the certificates to ssl/tls (accept all certificates) instead of the stock ssl/tls setting. (not sure the ssl/tls is right but its some set of letters lol).
Click to expand...
Click to collapse
Thanks for your response. I have all my contacts in the primary contacts folder. I even got rid of the subfolders because I know that jb doesn't do subfolders. I couldn't even get an initial sync for contacts. It won't find them in the address bar either

wallyn said:
Thanks for your response. I have all my contacts in the primary contacts folder. I even got rid of the subfolders because I know that jb doesn't do subfolders. I couldn't even get an initial sync for contacts. It won't find them in the address bar either
Click to expand...
Click to collapse
did you try erasing all accounts and then doing the certificates thing i just mentioned above. the guy i saw had your same issues and thats what he did. He didn't know if it had to do with that or not but he said his contacts started populating after that.

jayboyyyy said:
did you try erasing all accounts and then doing the certificates thing i just mentioned above. the guy i saw had your same issues and thats what he did. He didn't know if it had to do with that or not but he said his contacts started populating after that.
Click to expand...
Click to collapse
I even did a hard reset and installed the echange first. Will try the certificates soon Thanks